All Activity

Good to hear, as my first transferable is pending on eform 4 - purchased it through an LLC. Also have a client with a paper form 4 pending for his trust. If I had to choose one to clear first, I'd prefer that the client get his done lol

I'm pretty sure you're correct, unfort.

WTS: Scarce 1941 G33/40 Gebirgsjager Mountain Carbine W/ Original Sling Payment: Venmo, Zelle, USPS Money Order, Personal Check (wait to clear), Bank Check, Cash Price: $4500 OBO Shipping: Actual Price Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM) Cross Posted This is a very nice example of an incredibly scarce German production G33/40 mountain carbine. These were produced specifically for German Alpine troops for use in mountainous terrain. This carbine shows typical finish wear as shown in the photos. All of the numbers that I have been able to locate are matching including the bolt, the stock is not numbered. The bore is nice and sharp with some wear in the grooves (may clean up well with some scrubbing. A very nice original sling is included with the rifle. Please closely review the 60+ photos linked below. Contact with any questions / requests. All offers considered. https://imgur.com/a/XNX4vJ3 https://imgur.com/a/ZQzAf3G

I just received approval on the first trust I've done since the new system was begun, just over three months time, so not too bad. I'm advising my customers to go the individual route, but 3 months for a trust isn't that onerous. YMMV.

WTS: 4 German Lugers - 1915 DWM H Block, 1918 Artillery W/ Matching Mag, 1937 Mauser W/ Matching Mag, 1938 Mauser Payment: Venmo, Zelle, USPS Money Order, Personal Check (wait to clear), Bank Check, Cash Price: As Noted Shipping: Actual Price Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM) Cross Posted I have several very nice German Lugers available. Please closely review the 100+ photos of each gun. Your FFL must accept transfers from private individuals. Contact me with any questions or requests. All offers considered. Luger P08 - 1915 DWM H Block (scarce) - Very nice - Matching W/ Unnumbered mag - $2800 https://imgur.com/a/xwwG3Ii https://imgur.com/a/kRJRPlC Luger LP08 - 1918 DWM - Near Excellent - Machined stock lug - Matching W/ matching magazine - $3350 https://imgur.com/a/oq3DnJd https://imgur.com/a/dLv60aD https://imgur.com/a/m1X5S6I Luger P08 - 1937 Mauser - S/42, second variation - Excellent - matching w/ matching mag - $3000 https://imgur.com/a/j7ubDhq https://imgur.com/a/a01u5AH https://imgur.com/a/HWkmQzQ https://imgur.com/a/NIYItwe Luger P08 - 1938 Mauser - S/42 - Matching W/ correct mag - $2400 https://imgur.com/a/nzUfQir https://imgur.com/a/YSq5SBT https://imgur.com/a/2EHD46X

These were 45 only. The SSA were 9mm or 45.

Thanks to all who looked, your interest and for emailing. The gun has been sold.

this, i just look in my database, once its there, its gone

9mm Or .45 ACP……?

We have a Transferable Colt SP1 Registered Receiver conversion done by RPB Industries. This one is in good condition and runs flawless. We will Eform 3 to your dealer. Price is $28,500 Delivered. If interested message or call the shop. Thanks! Acme Sports, Inc. 800 E. Tipton St. Seymour, IN 47274 812-522-4008 www.acmesportsinc.com https://www.facebook.com/acmesportsinc

btt. only 2 left!

Hi...what is your number for the rest of the collection?? Thanks....Jon

...and WAY nicer than a Sten The safety is positioned for right-handed shooters to operate with their left thumb but if you're shooting left-handed you can shift your grip on the forend a bitand operate it with your right index finger

If you want a left handed shooter friendly gun, look at the Beretta 38 series. They are left hand eject

https://www.bluemountainsupplyllc.com/colt-canada-diemaco-m4le-ar15-complete-lower-receiver--double-bullet-.html

I did a "southpaw Stenling" once just because I am left-handed and a self-indulgent idiot. Of course the parent gun wasn't worth anywhere near what it would be worth today. It couldn't be a true mirror image because the cocking handle slot couldn't be moved but having it on the right side actually works well for lefties anyway. Moving the mag catch from the top of the magwell to the bottom (since it was rotated 180 degrees) wasn't too bad, but the bolt had to have the cocking handle hole carefully relocated and a custom wider cocking handle (to accommodate the wider Sten slot) had to be fabricated. The rest was pretty easy. The selector switch can be reversed, the barrel needed a clearance slot for the extractor cut on the opposite side of the original one and some sheet metal needed to be moved to make the swap between the ejection port and the attachment area for the magwell. Scott Andrey made me a custom barrel that was extended and threaded so I can screw a can on it and I got rid of the bayonet lug because it was in the way of my fingers and bayonets on subguns are stupid anyway. Obviously, a Sterling purist would puke all over it but I enjoyed the project and it's very nice to shoot left-handed. Oh, yeah- the magazines just need a small milled cut on the side opposite the original "shelf" that the mag catch uses. They are still fully functional for a normal Sterling. Just to make it worse, I modified a 50-round Lanchester mag also, just to have one. It's fun walking up to the firing line to the right of one of your buddies and showering them with hot brass from an unexpected direction! Revenge of the lefties!

https://i.imgur.com/NxfdHLE_lq.mp4

Still have any?

he who awakens a sleeping dog may get bitten. old chinese proverb. the $200 transfer tax is the best deal we are ever going to get and we are lucky to have it. only an imbecile would complain about it.

btt

I believe this is a step in the right direction. We’ve seen for years what “not poking the bear” has done… glad to see we are going on the offensive an attempting to make change.

Seen bottom feed stens that top eject done. But never a left handed set up.

Unit is in fine serviceable condition, proper original flashlight, flaming bomb and US PROPERTY marked on the body of the flashlight, Cross cannon marked on the stock of the shotgun. Came out of a friends long time collection, I saw this unit back in in the mid 1980's. Asking $1889. Email with any questions, Bill wspringfield@comcast.net

Has anyone ever done this? Is it physically possible? Would it have to be a Postie or could a transferable Wilson MkII tube be used?

Price reduced on the m60 bolt.