All Activity

Looking for an 'O-marked' MG3 top cover FEED PAWL. These are the .308 MG3 feed pawls that are designed to work alternately with M13 disintegrating links. If a trade interests you, I have multiple HK 'O-marked' .308 MG3 Feed TRAYS (for M13 lnks) that I would be willing to trade for an 'O marked' Feed PAWL. Thanks. -TomH

Nice could I see the form 3 on this Dealer Sample? Tom

All sold.

Sold

BTT

BTT

I need them all except the sear In 308

Messaged

The only way is a paper form 4. Fill out the first page and pay $200.

Good info, but academic since most 51B builds don't run regardless of what links are used or the combinations of parts. So much going on at once, it's difficult to get it all to work in harmony. Starting with the 21 platform is the first problem, since that was not too dependable in the first place, and that was for original guns, not "builds" which adds another level to the already marginal design. If you are successful in getting it working, it will be short lived. VERY cool on the gun room wall though!

Looking For 300 H&H Reloadable cases And Or Reloaded For Components Only. I Can Use 20 To 40 Cases OR Less

Up for sale is an extremely nice Taiwanese T65 rifle that I put together. I've rebuilt a total of 20 T65 upper receivers/parts kits and this is the personal parts kit that I made for myself. I'm currently reducing some of my personal collection and so it's now time for this one to go. 3250 shipped to your FFL. NO TRADES PLEASE This is far and away the nicest T65 rifle that I'm aware of. The parts kit was hand selected for completeness and finish and is the best one I've yet to come across. The upper receiver is a nice, strong black finish which is 95% complete whereas most T65 uppers were sunbaked and faded. The upper was completely disassembled, all parts thoroughly cleaned, degreased and then reassembled. The barrel is a match-grade Critereon 1:12" twist M16A1 profile which is true and correct to the original barrels used on this rifle. It was then sent off to John Thomas at Retro Arms Works where the front sight assembly, handguard retainers and original flash hider were reparkerized and then correctly pinned to the barrel. I then installed the populated barrel assembly on the receiver using the correct barrel nut tool, and I riveted on the gas piston guide ring. The furniture is also in very nice condition with the original swiveling buttstock sling loop (which is often replaced or missing) and buttstock hardware. An original rack number is painted on the right side of the stock The handguards are in good condition and are engraved by the soldier who carried it in El Salvador where the kit is from. The left side reads "Dios bendiga mi camino" which translates to "God bless my path" and the right is marked CETIPOL which is the security agency where these kits came from. There is also a cross on a mound engraved on the top of the handuards at the 12 o'clock position. The lower receiver is an Int Mil Co correctly machined/profiled receiver marked T65 in the export format which is correct for this kit considering it was an export gun originally. All lower parts parts/pins are original including the selector, FCG, bolt catch, mag catch, mag button and take down pins. All springs however were replaced with new USGI springs for safety and reliability. The original buffer was also used and the rubber bumper on the back was replaced as all the originals were cracked/damaged. The action spring was replaced with a new USGI spring as well. After the rebuild process, the headspace was checked on the upper and test fired with 10 rounds. From there I've only fired an additional 2-300 rounds through it. From a rest the rifle was shooting about 1 1/4" at 75 yards using standard ball M197 55gr ammo. Don't miss your chance for one of the best examples of a rare and unique variant of the AR! I am also posting this on ARFCOM under my other username Ringer706.

Franklin Armory's patented Binary Firing System (BFS) is now available for your Glock 17 Gen3! The new G-S173 allows you to select between semiautomatic and Binary modes to provide reduced split times and tighter groupings. Like all BFS triggers, the release round can be cancelled by simply switching back to semiautomatic while the trigger is depressed. Plus, you'll always know which mode you're in without having to come off your target with the integrated back plate mode indicator. Prefect for defense, sporting and recreational use. Features: Easy to install Fits Glock 17 Gen3 Selectable Semi and Binary (pull and release) Integrated mode indicator Optics ready (custom adapter plates sold separately) Front and rear tritium night sights High-tactile front and rear serrations Anti-glare top stripe serrations Binary Trigger Operation: Position 1-Semi Fires 1 round per pull Position 2- Binary Fires 1 round on pull and 1 round on release FRANKLIN ARMORY G-S173 BINARY KIT GLOCK 17 GEN3 $809.99 https://www.robertrtg.com/store/pc/FRANKLIN-ARMORY-G-S173-BINARY-KIT-GLOCK-17-GEN3-335p13663.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

U.S. EE-8 field phone with OD green case. Original USGI surplus in good condition. Need to call General Patton? You won't get him on your Iphone. You need this EE-8 Field Telephone. The EE-8 field telephone was used by the US Military from 1935 into the Vietnam War. It used a wired line with a maximum transmission distance of 7 miles. The EE-8 uses D cell batteries to power the electric signal that carries the signal through the wire to the other phone. It has a hand-cranked dynamo to generate the charge that rings the phone on the other end of the line. During World War II the phone was preferred to the radio, and the EE-8 was much more reliable than the backpack mounted Walkie-Talkie (SCR-300) and the Handy-Talkie (SCR-536). The phone line, which could be run through a switchboard from a command center, was often run by soldiers during combat situations. U.S. EE-8 FIELD PHONE WITH OD GREEN CASE $99.95 https://www.robertrtg.com/store/pc/U-S-EE-8-FIELD-PHONE-WITH-OD-GREEN-CASE-8p12563.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

Sold as is. By purchasing this item you will receive the EXACT part shown in the picture. Polish SG-43 armor steel plate for carriage mount. This is the correct plate for the standard SG-42 carriage. This is not the night vision version, but this plate can be cut down/modified for use on night vision ready carriage mounts. SG-43 ARMOR SHIELD PLATE FOR WHEELED CARRIAGE MOUNT $369.00 https://www.robertrtg.com/store/pc/SG-43-ARMOR-SHIELD-PLATE-FOR-WHEELED-CARRIAGE-MOUNT-319p13269.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

Federal, PowerShok, 270WSM, 130 Grain, Soft Point, 20 Round Box 270 Winchester Short Magnum 3,250 Feet per second 130 Grain jacketed soft point 20 Rounds per box The traditional lead-core hunting bullets in Federal PowerShok rifle loads provide solid accuracy and power at an affordable price. They feature reliable Federal brass, primers and powder and are suited to a wide variety of medium and big game. Specifications: Brand or Manufacturer: Federal Model or Type: PowerShok Cartridge: .270 Winchester Short Magnum Bullet Weight: 130 Grains Muzzle Velocity: 3250 Feet Per Second Energy: 3049 Foot Pounds Ballistic Coefficient: .367 Usage: Medium Game, Large Game Case Type: Brass Corrosive: No Package Quantity: 20rd Per Box FEDERAL POWERSHOK 270 WSM 130GR JSP, 20RD/BOX $64.37 https://www.robertrtg.com/store/pc/FEDERAL-POWERSHOK-270-WSM-130GR-JSP-20RD-BOX-460p13631.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

CCI, Suppressor, Clean-22, 22 Long Rifle, Round Nose, 45 Grain, 200 Round Box CCI Clean-22 Suppressor ammunition uses an advanced polymer bullet coating to reduce lead fouling inside a suppressor up to 60 percent. The exclusive feature allows much easier suppressor cleaning and maintenance, as well as excellent accuracy. With dependable CCI priming and consistent propellant, the loads cycle reliably through any suppressed firearm. Features Polymer bullet coating reduces lead fouling in suppressors up to 60 percent Ballistically optimized 45-grain lead round nose bullet Reliable function in semi-automatic firearms Extremely reliable CCI priming Cartridge: 22 Long Rifle Grain Weight: 45 Grains Quantity: 200 Round Muzzle Velocity: 1000 Feet Per SecondMuzzle Energy: 100 Foot Pounds Bullet Style: Total Synthetic Jacket (TSJ) SPECS: Brand or Manufacturer: CCI Model or Type: Suppressor Cartridge: .22 Long Rifle Bullet Type: Round Nose Bullet Weight: 45 Grains Muzzle Velocity: 1000 Feet Per Second Subsonic: Yes Case Type: Brass Primer Type: Boxer Corrosive: No Package Quantity: 200rd Per Box CCI SUPPRESSOR .22LR 45GR SUBSONIC ROUND NOSE, CLEAN-22, 200RD/BOX $27.23 https://www.robertrtg.com/store/pc/CCI-SUPPRESSOR-22LR-45GR-SUBSONIC-ROUND-NOSE-CLEAN-22-200RD-BOX-460p13667.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

It's time to thin out some of more unique uppers from my collection. All prices are shipped, absolutely no trades please. This is also being posted on ARFCOM as well using my username there, Ringer706. Colt 633 "DOE" 9mm Upper Receiver w/ spare handguard set - $3300 This is a factory complete 633 with all original and correct Colt parts. Upper receiver is in excellent condition with only few sparse handling marks. Barrel is marked C MP CB and 9MM. Includes a second set of replacement handguards still the contract packaging. FULL ALBUM John Norrell Colt 636-style "DEA" 9mm Integrally Suppressed Upper Receiver w/ patch & DEA Manual (reprint) - $3500 WITHDRAWN This upper is a very unique and rare John Norrell Colt 636-style integrally suppressed 9mm upper receiver. This upper/suppressor assembly is from the early 90's and is made in the style of the original Colt/KAC integrally suppressed 9mm upper which were used by the Clandestine Lab Enforcement Team (CLET), seen also in the Max Crace painting from the 1980's, “Knock knock." The upper receiver itself is a small pin Colt 9mm SMG receiver (originally came to me on a large pin sporter), with a standard full auto 9mm bolt and matching charging handle. The suppressor is a two stage design that works similar to an MP5SD. An original 10.5" 9mm SMG barrel was heavily ported, then a large expansion chamber and packing material surround it. Finally a small, traditional cup baffle suppressor is in front. This causes even standard supersonic 115gr 9mm ammo to leave the barrel at subsonic speeds. It's easily one of the quietest semi-auto, center fire I've ever shot. Upper will come with the reprinted DEA manual which includes references to the upper and a CLET patch. THIS IS AN NFA ITEM. Currently on a F4 in MI. FULL ALBUM Colt 604 Upper Receiver, very early and factory original - $2750 This is a very early, complete 604 upper receiver that I believe to be entirely factory original. The upper receiver itself has all of the original forging features that put this in what was likely the first batch of 604's made. Near the ejection port in the upper right corner, it has the square pad area, and more importantly, just below the left side of the ejection port, the body line which extends up from the magazine well on the lower is in the original location, positioned directly underneath the port instead of to the side, meaning that the line from the edge of the magazine well on the lower matches up with the line on the upper. This profile was changed early on and now all current uppers have a step between the upper and lower as that profile was moved left to add more material in that area. The front lug is also rebated. The barrel is M VP marked with 12 at the 6'clock position by the muzzle. The exterior of the barrel has patina but the bore is good condition and not pitted out like most Puerto Rican import uppers. No drain hole FSB with forge flashing remove, roll pin front sling swivel and early bend style gas tube. The bolt is the correct transitional slick-sided with all phosphated parts but a chrome gas key. The firing pin is the correct flat-head. Handguards are also the correct, early no drain hole type in good condition. The receiver itself is sunbaked with a lot of the original anodizing faded and missing in some spots near the front. FULL ALBUM Colt M16A1 parts kit rebuild with 1969 Colt barrel - $1700 This is a complete Colt M16A1 upper receiver in good surplus condition. The upper/ejection port door/slip ring/charging handle/BCG all came from a surplus parts kit, to which I added a 1969 Colt M16A1 barrel. Barrel is marked C MP C, has a drain-hole C and Bell marked FSB with forge flashing removed. Bore is in nice condition, no issues to note. Handguards are nicely mottled and have drain holes and L/R markings. BCG is stamped C and bolt MPC. The upper is likely early 1970's. FULL ALBUM Colt 741 HBAR - factory original, perfect condition - $2750 A very hard upper to find, this is a factory complete Colt 741. This is not an HBAR sporter which was converted with a bipod but a very early 1980's factory upper. Receiver is marked C M for Marietta forge which was used for the first few years of A2 production in the 80's. The forward assist is a clipped large button to be used with A2 lower receivers. The BCG is stamped C with the bolt marked MP C. Another very rare early A2 production feature is the unmarked heat shields in the handguards. The barrel is an HBAR profile, but the tell is the position of the markings. In front of the FSB, the barrel is marked C MP 5.56 NATO 1/7, but is shifted closer to the FSB than on normal A2 uppers so the text isn't cut off by the installation of the bipod. Sporter barrels are marked HBAR which this is not, and if made from another A2 barrel, the barrel stamping text will be cut off when the conversion is done. Factory mounted bipod collar is installed with an original Colt production bipod which are very difficult to find. Overall it is in very excellent original condition and appears to have been shot very little. Parkerizing on the barrel is a nice deep gray with a very nice 80's Colt Gray on the upper. FULL ALBUM Colt 750 LMG Upper Receiver with hydraulic buffer, action springs, LMG bolt catch and manuals - $4200 Last but certainly not least is a factory original Colt 750 LMG upper receiver. This is in excellent original condition and waiting for your transferable or post sample receiver (or semi!). Included with the upper is the correct hydraulic buffer and 2x green action springs meant to be used with it. Also included is the correct LMG-style bolt catch. This is intended to be used with the open bolt FCG to allow the bolt to advance forward from the catch to the sear engagement on the underside of the BCG when the magazine button is pressed. This makes the gun ready to fire when the next magazine is inserted without needing to press the bolt release. It can be used on a semi-auto lower without issue however and is a nice touch to a semi-auto clone. The BCG/bolt are standard Colt stamped M16A2 and does not have the sear cut on the underside. Also included is the small green factory user manual as well as a the operators and maintenance manual. FULL ALBUM

I got a customer's back today that way. They don't care.

MM23E/21E owner here.....my gun def runs M13 w/o issues or mods. Good write up on the M13 v other link/belt types ...I had always just figured the HK51B ran M13 links as its prefered food.

Sig P210 (American) Target, 5 inch Barrel, Unfired, New in Hardcase- My Wholesaler has them at $1743 , MAPP is 1999 and MSRP is $2179 $1650 Shipped FFL to FFL Pics to be Added

22eley is a Very Nice,Knowledgeable Class 3 dealer-Buy with confidence !!!

The standard P226 grip screws are too short. Any ideas where I can find longer, slotted, black, polished, grip screws?

I purchased a thompson machine isis2 suppressor and they made a custom suppressor mount to fit my Reising M50. The name doesn't indicate a Thompson Machine gun specialist. Just thier chosen business name.

lowered to $5,500