komodoj Posted October 22, 2022 Report Share Posted October 22, 2022 Toying with the idea of building a vertical fed Sten, I am an 07/02. Is all that is required is a modified bolt and the magwell section on the tube be cut different? Is the ejector in a different place? Thank you in advance. Quote Link to comment Share on other sites More sharing options...
Ryo Posted October 22, 2022 Report Share Posted October 22, 2022 I'm not a expert, but the ejector would have to move if you move the ejection port. You probably already know that. Good luck on it.. If you have the skills, and the equipment, I could see this being done. Quote Link to comment Share on other sites More sharing options...
komodoj Posted October 22, 2022 Author Report Share Posted October 22, 2022 7 hours ago, Ryo said: I'm not a expert, but the ejector would have to move if you move the ejection port. You probably already know that. Good luck on it.. If you have the skills, and the equipment, I could see this being done. I don’t think I mentioned that I was moving the ejector? Does it have to be moved if the bolt is being reconfigured? Quote Link to comment Share on other sites More sharing options...
StrangeRanger Posted October 22, 2022 Report Share Posted October 22, 2022 (edited) You may want to look into whatever info you can find on the WWII German MP3008. It was essentially a very crude vertical Sten that used MP38/40/41 mags Edited October 22, 2022 by StrangeRanger typo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.