johnd.bush

Why? In my personal experience both the M73 and the "improved" M219 were dogs. While on paper they seemed great in actual use they just did not measure up. I would not refer to them as BMGs, Brownings worked even the M1919A5, which is what the M73 and M219 were supposed to replace.

get his correct seller name and do an advanced search on gunbroker...as you spell it he does not exist

Check with the Dealer Warehouse in Modesto, CA. They bought the last of ARMEX MP-40 mag pile

Last one sold for $355.00 on gun broker with a good barrel and a pretty nice stock. Are you looking to pay less or more for an even better kit?

I'm in Klamath Falls, welcome to come over the hill to the warehouse, but no on your offer

Have factory original hand guard, new in paper wrap $400.00 This is the early full length brown style.

Great pile for a gunsmith or Tinkerer, about 39 receivers barrel combos, about the same number of lowers, and bolts, lots of the small parts. A mix of the early metal lower style that takes the Grease gun magazine and later plastic lowers that takes the Thompson. $3,500 for the pile. Part of our week end of cleaning the warehouse. Obviously a better thing to look at the pile. Many other piles and lots being made. Example L1A1 Australian original parts lot about $80,000 retail (over 400 locking shoulders alone) $10,000; East German Makarov parts all NOS about 6,000 parts $8.000. 541.882.4249

Thanks for the offer, but too heavy to prepay at these prices, check with SARCO or IMA they are much closer to FL.

Bulk deals, all plus shipping, any questions either email or call 541.205.2469 CZ52 pistol cleaning rods, 50 rods $35.00 DDR AK pistol grips, NOS, 10 each $40.00 FN Model D LMG 7mm barrel, mostly complete 10 each $125.00 M14 combo tool/cleaning rod handle loose, new but light rust, 100 pieces $125.00 Makarov pistol grips with lanyard (drilled grip style), used 25 pieces $50.00 Remington Lee combo tools, 100 tools $165.00 Bigger bulk deals East German Makarov parts list Part name How packed total number Barrel pin 40 in a pac 200 Extractor (004) 65 per pac 390 Extractor plunger (006) 65 per pac 195 Extractor spring (005) 65 in a pac 260 Grip, late black 5 per pac 20 Grip screw late large head mixed 700 Grip screw, old style small 10 40 Hammer 50 per pac 300 Hammer spring 50 per pac 550 Hammer spring retainer mixed 100 Rear sight (001) 55 per pac (3 pacs of different sizes) 275 Recoil spring 40 in two 20 piece twin pacs 240 Safety w/spring 125 in pac 625 Safety spring (002) 100 in a pac 400 Sear (021) sear only 50 in a pac 300 Sear complete with spring 50 in a pac 250 Slide stop ejector 40 in a pac 240 Slide stop spring (022) 50 in a pac 200 Trigger (001) 35 in a pac 210 Trigger guard 5 in a pac 30 Trigger bar (020) 50 in a pac 350 Trigger guard retainer pin 5 in a pac 20 Trigger guard spring 10 in a pac 30 Trigger guard spring plunger (004) 10 in a pac 70 The above 5,995 parts are all new old stock original issue East German parts still in the original packaging. $8,000.00 Australian L1A1 parts lot, all NOS, original Bolt, breech 22-20 50 loose Cocking handle, axis pin 22-9 2300 bags of 100 Cocking handle, plunger 22-7 2200 bags of 100 Cocking handle, slide 22-8,10,11 70 loose Cocking handle, stud 22-10 300 bags of 50 Firing pin extension (CAN) 22-26 51 boxes of 5 Gas block 18-2-2 2 loose Magazine lug not listed 600 bags of 100 Pistol grips (raw) 28-15,16,17,18 4 loose Pistol grips (treated) 28-15,16,17,18 8 loose Screw, butt stock Attaching 30-6 500 bags of 50 Screw, pistol grip retaining 28-29 120 bags of 10 Sling swivel (in process, plastic)30-12 1300 loose Trigger (CAN) 28-6 18 loose Trigger plate 28-30,31,32 600 boxes of 100 Accessories Accessories roll (Empty) 28 loose Accessories roll (full) 37 loose Brush (Round) 111 loose Combo tool (flat) 300 bags of 25 Magazine loader, metric 43 loose Magazine loader, nylon 34 loose Lot price $9,000.00 Purchaser will be offered locking shoulders maybe 1,000 to 2,000

German WWII MG34/42 ammo cans with five original belts, (imported 40-50 years ago from Finland by ARMEX); lot of 6 $200 plus shipping, sample can $50 PPd; MG 34 barrels original dark bores, usually good outside blueing, all proof marks intact, $60 plus shipping; the gray paper like muzzle covers, $8 PPd. lots of small parts available. 541.363.2695

Bolt shown is for 9mm Para ( 9 X19) not 9mm Steyr.

Have factory original hand guard, still in tissue wrap, the reddish brown color, These are left over from the old ARMEX day , whne both rifles and parts kist were being sold. please email direct johnd.bush@yahoo.com

mags are original, just sold one on GB 612291410 can see typical condition photo.

Do you need the type with the "controlled" firing pin and the small diameter sporing in the retainer tube with the end cap retainer or the later style using the large diameter recoil spring (almost tube sizer) you may email me directly johnd.bush@yahoo.com

Have 12 rd for the Reising Model 50 series in Cal..45 $65.00 for Cal..22 Model 65 series $45.00

Not to cut Don Bell, but individual parts as follows: Bolts, lock frame, muzzle boosters (remember Star Wars fans have run these way up), Flash hiders with muzzle boosters, many small parts, you can email me directly at johnd.bush@yahoo.com

On the Beretta 22 rifle need to know if early style with movable cocking handle or later fixed style. Either way not cheap.

There are many parts that are different but many can also be used. Top covers are different, M3 has a wider slide to increased belt lift; Bolt has lightening holes; Trunion usually does not have front sight mounting grooves; Top plate usually does not have bolt hold open (for semi fire); Rear buffer plate; Sides plates are machined for chargers; mounting holes allows use on tripod and mounts common to M2HB. Really best source is TM 9-219 (AN-M3); TM 9-225 M2 aircraft basic; There is also a TB on just id of all Cal..50 series.