Wally E

That is milled, not cast nor forged. Not sure how well the milling was done as it appears the selector detent is misaligned (in both positions in the pics, the selector isn't straight) and it appears the hammer/trigger anti rotation pin needed a little bend to fit. None of this would prohibit running well...

Exactly as you saw Frank. Form 4 approved 3/4, received 5/27.... that is 12 weeks just in "the mail" so to speak.

A 1984 hk94 would be a 4 digit / no alpha SN, but I can't see how that host could become a premay K gun.

The 308 conversion in the mg34 can be finicky, but when done right they just run. I've been doing 308/x51 conversions for a while with great results, long and short, and my personal short 34 (mg34s look) runs perfect at 950RPM. Doesn't sound like you have a belt issue by your description, but the MG3 belts are greatly preferred for feeding 308/x51.

John U is an outstanding human being even though you say "I don't think he is a thief". You can't just say that he isn't a thief and his own guns are missing.... It should be obvious to anyone who reads this that there is a lot more to the story. I know a fair bit of the story and none involves John stealing his own guns.

NOS sights are available at Sarco for $175 if need be, I just finished a 60mm build recently and it is quite a hoot.

Doesn't appear to be a 9mm upper and certainly isn't a 9mm bolt. Do you have a full 9mm parts set available ?

Looking for a 1919, complete gun, sideplate only, or gun and accessories. Let me know what you have, thanks.

Phil if Gaujo isn't interested PM me details on the 1919 please, looking to buy one.