RCM Limited

No problem, I can meet you half way if you like. Send me an email at RCMoles@SUddenlink.net

I have for sale on a form 3 a 45 acp 1928 Thompson in Very Good condition w/ two mags for $16500. The gun was test fired when purchased and ran perfectly. The firearm was cleaned and stored after the initial test firing. No additional rounds were ran thru the gun by this owner.

Have for sale one Stainless Ruger KAC 556 for $13000.00. The current owner ran one mag thru the gun to make sure it worked when purchased, cleaned the weapon, and placed it in the safe. The gun is very clean.

Had a few questions about the guns. The WH 1928 Thompson is a dedicated receiver and was never a 45 acp 1928 converted to a 22 LR. I serial no. 218TF on the gun is consisted with the 22's manufactured by WH back in the day. The ac 556 parts kit will not be separated from the AC 556F. As for the price on the guns, as of now the prices are firm. I am not trying to get top dollar, but seek a fair price. Both guns were test fired when purchased, cleaned, and stored. They were not fired again after being stored and I have not fired them. Not sure about the total round count on the guns but they had one magazine shot through the gun by the current owner when purchased. Not sure how to about checking the bore. Rodney had a question, assuming I understood it correctly about "Why sell?" Like most things in life priorities change. 22 Thompson SOLD

Rodney can you send me an email so I can address your questions? Thanks RCMoles@suddenlink.net

I have a friend that is getting older and has asked me to assist him in selling some of his NFA items. The Ruger was test fired and worked perfectly by him when purchased, cleaned, and then stored in a climate controlled gun safe. The AC-556F asking price is $10,200 which includes a 22 lr conversion from Jonathan Ceiner You can contact me at RCMoles@Suddenlink.net. I am an FFL/SOT with references.

I have two 22 cans that I have not shot that much. One is a Guardian and the other was made by NFA Inv. Both work fine with no baffle strikes at all. If you'd like to see a pic just send me an email. RCMoles@suddenlink.net You can have both cans for $100 a piece or $200 total. Plus S&H.

can you email me with your phone #? Roger w/ RCM Limited RCMoles@Suddenlink.net

eMGunslinger can you send me an email please? RCMoles@Suddenlink.net Thanks!

No they need everything but the Glock 17. Once they know what the exact verbiage is the PD Letter can be obtained. Thanks. I will help them install the sear once the ATF approves the transfer.

Have two friends with PD Letters to do a demo involving converted Glock 17's to Full Auto. Can you put me in touch with a CII manufacturer to acquire them please? Thanks RCMoles@Suddenlink.net

John Andrewski would be hard to beat. FWIW

Call Andy at KGB Armament in FL, he has done this.

R.L. send me an email. RCMoles@Suddenlink.net Roger

If I understand your question correctly, I assume you want to create a Sterling MK5 from your MK4. Andy at KGB Armament in FL does a super job on these particular builds. I have two guns from Andy where he did this. IMHO Andy's suppressor bbls are much better then the UK originals. This will not be cheap but it will work. Note: You'll be able to shoot super sonic ammo through you modified MK4 (now a MK5) because the bbl has ports drilled into it (it converts the ammo to subsonic before leaving the end of the bbl upon firing), but you might not want to shoot sub-sonic ammo in it due to creating a potentially unsafe condition with the gun due to the ports. If all you want to do is thread your existing bbl on the MK4 to accept a can, Greg (aka Toad) had this done I believe on his Sterling Mk4. I thought I recall Greg saying the set up works OK but it looks a little weird. Hope this helps.

MP5's are hard to beat, they run like sewing machines and parts are not hard to find. However, I would start with an Uzi, they are tanks and run and run and run. Parts are easy to find as well. Sterlings are really sweet too though. FWIW

You might want to look at John Andrewski. Great guy many of the posters here will echo my opinion, "John is one of the best." Roger w/ RCM Limited

Depends on how fast you want to move it. If you want to move it really quick list is around $1600. There have been some on GB for weeks listed over $5K and they are still there. An price somewhere in the middle should move in a few weeks or so. Best of luck.

Does anyone have any idea when a factory FA Sig MPX might become available? Would love to do a demo and include one of them. TIA RCM Limited

I have a friend that is an FFL/SOT with a current PD Letter and he would like to procure a HK 33 or 53 for his demo. Just send me any email. Thank You! RCMoles@suddenlink.net

Looking for a black crinkle finish UK built Sterling MK 4 post sample. Any pics would be helpful and asking price please? Please email me at RCMoles@suddenlink.net TIA

Sorry to say that it does not. You must be a manufacturer to do what you suggest. IMHO

This is the first time I have used the new form 4 since it was changed and I would like to avoid making any mistakes if possible. If the transferee is a SOT sole prop for a smg coming from a non FFL/SOT on a form 4 I assume no CLEO notification is necessary and just like we did in the past box 1, box 2a, box 2b, box 5, box 6a, box 6b, box 13, plus the certification at the bottom of page two must be signed/dated. Not to mention how the payment will be made documented on page 3. If I have missed anything please advise. I also assume we would not check any blocks in box 2a. I realized all the info from the transferor must be filled in as well. I was mainly concerned about the transferee. TIA RCM Limited

I have a Pre HK 33 incoming. It has been a safe queen for 10 years and in vg shape. Make an offer. RCMoles@suddenlink.net

Looking for a transferable Sterling MK 4 built by John/Stan on a DLO tube. If you have one for sale please let give me a shout. Pics and asking price appreciated. Thanks RCM Limited - FFL/SOT in WV you can contact me at RCMoles@Suddenlink.net