lonniejt

I'll take it! LJ

I'll take them. PM me your mailing address and other information. Thanks, Lonnie Joe

Put me in line behind Chris. Thanks, LJ

I had thought of 20 Gauge! I had some "desk drawings" for a 3 or 4 shot 20 Gauge Roger Rabbit Pistol at one time but never built it. I am however considering building some 28 Gauge Barrels that would fit in these FSG's. Let me check my Inventory, but all the Black ones are sold and I may have two or three of the Red ones left.

All of the Black FSG's are Sold or SPFs. If interested, please PM me through Strumgewehr. Otherwise, the Scammers have copies of several of us Dealers' papers and are now cloning or opening similar emails. DO NOT respond to an email from "lonniejt1@hotmail.com" as it ain't me. It appears that our Admins have let the WTB Boards go to the Scammers and now they are here too. Beware and Verify!!! Thanks, Lonnie Joe of CFE LLC

Jim - Got the emails and PMs and I am about to submit the Form 3. Thanks! Lonnie Joe of CFE LLC

Don of Ozark Armory - I am about to send you an email, then we can exchange FFL/SOT papers. Thanks, LJ of CFE LLC

Will shoot both 3" and 2 1/2" .410 Shotgun Shells. I forget whether I shot 4 or 6 shot in the video, but it would have killed a snake. With the Critical Defense, it would be a bad day for those 2-legged snakes...

I've got just a few of these left. Probably not going to make anymore. However, I have been "toying" with the idea of making a 28 Gauge Barrel that could replace the .410. First and Last Bump!

I have finally bought a Burgess Suppressor...no thanks to all the Scammers who have responded.

Well, here we go: I posted in the WTB for a Burgess Suppressor for a Stemple 76/45 in 45 ACP. I got a nice response, along with an FFL/SOT from Bret Millet of B&R Guns and I could pay him via Zelle or a F&F PayPal, in which I responded with my FFL/SOT from Crowder Farms Enterprises, LLC and a promise that I would head to PayPal. The email address was "bretmillet@onmail.com". I followed up with a phone call to B&R Guns and left a message to call me back. Mr. Millet promptly called me back and informed me that he did not have a Burgess Suppressor and that his FFL/SOT was being circulated by a scammer. The good news is that I have cancelled the payment to bretmillet@onmail.com, but the BAD NEWS is that my FFL/SOT for CFE LLC is now in the hands of a scammer, along with my Business Card. Therefore, if you get an email from me, please verify that it is in fact my email address and give me a text message at 256-679-0001, as my phone will not take calls unless you are in my Contact List. But, feel free to ship any "goodies" to my PO Box 218 address, unless the scammer can modify my FFL/SOT to send the item to them. It is unfortunate that few of these guys or gals get caught. It would be nice if they would attend a machine gun shoot...as targets.

Burgess or other Suppressor for a Stemple 76/45 in 45 ACP that will replace the Stemple barrel and shroud. In other words, an Integral Suppressor for this type machine gun. I have bought a couple of barrel nuts and barrels from Jim, but he does not have any of these Suppressors left. Hopefully on a Form 3 and I would go as high as $600 shipped. Thanks, LJ of CFE LLC

I have at least 5 Flashlight Shotguns for sale in Red or Black. These are functioning flashlights with a single round of .410 Gauge that can be fired from the rear of the AOW Device. I am pricing these at $750 for the Black and $850 for the Red ones, or if you want both $1500 shipped to your FFL with SOT. They are on Form 3 here in Alabama. If you want to see one in action, I have done a YouTube video and here is the link " " If interested, PM me here or send me a text to my Cell Phone at (256) 679-0001. Lonnie Turney of Crowder Farms Enterprises, LLC (CFE).

I just listed this fine M3 Grease Gun on GunBroker a little while ago. It is a nice ONE! My favorite Machine Gun! I still have another Transferable one and a Pre May DS Ithaca M3A1. These are getting harder and harder to find too!

I'll vouch for Dakota. Good Dealer near Athens, TN. I have bought a couple of items from him and I have always been satisfied with Quality and Shipping. Lonnie Joe of CFE LLC

Rick - Darn nice Greaser! Please put me first in line for that Suppressor. I had chatted with the Medea man several years ago and there were only 3 9MM's that he built and 1 22 LR one on the Transferable List, so this is a rare configuration. Lot of Bang for the Buck! Lonnie Joe of CFE

Looking to Sell or Trade. I may put on GunBroker tonight at a penny auction and see what happens, and, I hate GB, but then I will know true "market".

The “Title” pretty much says it all! Guide Lamp M3 in 45 ACP and it runs like it should. I have a video that I may try to upload of me shooting it yesterday, if I have enough bandwidth (my location is just better than dial-up). It is in my “E-File” Inventory, so a pretty quick transfer, unless you are an individual from Alabama, then I can Form 4 to you. All Guide Lamps are C&R, so that is an option also. I am pricing at $42,000, now reduced to $38,000 to your Dealer’s door, or best offer. You can PM me here or text to my personal Cell Phone (256) 679-0001. I have had some interest, but I must have been "high market" on this item. If you are in the Huntsville Decatur area and want to view or shoot, then make an appointment and bring ammo. Crowder Farms Enterprises, LLC (CFE).

David - Thanks for the PM and the post here; let’s make a deal! Lonnie Joe of CFE

I need several Silencer Mounts for the AAC Silencers. It is the 51 or 52T ones that I need, both for 5.56 and 7.62. This is the item that you screw on your barrel and it passes as a flash hider, but if you have an AAC Silencer, it will quickly attach to your barrel. My immediate need is for a 5.56 one. Thanks, Lonnie Joe of CFE

Thanks! However, I do not have an account with Lipseys. Davidsons, MSR and MGE and they are always "allocated". Oh well...

OK...no green ones...any Black or Other Color?

I am looking for a New or slightly Used Kel Tec CMR 30 Rifle in the Green powder coat color...might not cull one in Desert Tan, but preference is Green. My Corporation has an FFL/SOT, but this would be a personal gun; therefore, I would not mind traveling to your shop or meeting an individual at a mutually agreeable Police Station or other public place. I am in the North Alabama area, so a five hour drive one way would not be out of the question. Also, if you are a Dealer and have a matching PMR 30, I may acquire both, but principally interest is the Rifle. Just PM me "what" you have and we will go from there. Thanks, Lonnie Joe of CFE LLC

Well, I just went to Nick's Web Site for Rock Creek Gun Service, and, it has the message that the Shop is permanently closed. I have his personal Cell Phone and I chatted with him 2 or 3 days ago and he did not mention he had closed down permanently. He has had some medical issues and I knew it might be March or April before he made it back to the Shop. His two email addresses are "nick@rockcreekgun.com" and "nhope1@aol.com". If he does not respond, then I guess he has lost interest. Neither of us are "young chickens". Best of Luck! Lonnie Joe of CFE LLC