Search the Community

Showing results for tags 'hk94'.

Found 11 results

  1. HK41 – Manufactured in May 1966 by Heckler and Koch in Germany and imported by the Santa Fe Division of Golden State Arms, Pasadena, California. Semiautomatic 7.62x51mm predecessor to the HK91 with a pushpin receiver grandfathered under the Gun Control Act of 1968. All matching parts with exception to buttstock and magazine with the receiver’s 785 suffix on the bolt-carrier, bolt-head, locking-piece, and grip-frame. Stock trunnion has a 680 suffix. Magazine is late production steel. Overall condition is 98% with near perfect parkerizing and very good condition wood furniture. Fired very few rounds, rifling is sharp, bore is bright, internals are clean, and zero scope-mount or ejection marks. Outside of the earliest 1962 examples which sell for over $20K, this is the earliest example of the semiautomatic Heckler and Koch G3 with the correct pushpin placement, paddle magazine release, and the original grenade-ring. Doesn’t get much better than this for a 51 year old rifle. $8K. Thanx. SAMMY!
  2. Up For Sale : New Unfired HK 94 A2 Rifle, Date Code II (1988). Also included are the following: (5) New HK94/MP5 German 30 round Magazines Date code II (1988), (1) Lightly used German 15 round Magazine Date Code IG (1986), (1) New, Never installed HK MP5F Retractable Stock (Early Model, Not 4 Position), (1) New never used C&S Metal Werkes MP5 50 Round drum complete with Eagle Industries Pouch and original instruction manual, (1) Sealed Pkg containing Barrel Shroud, Forward Grip and allen wrench, (1) extra Barrel Shroud, Original HK Warranty Registration Card, (1) Red HK94 Instruction Manual( Not Original) and Original Styrofoam Shipping Sleeve. The styrofoam is cracked in several places and has been altered to allow the stock and the 5 Magazines to fit when closed. I have attached one single picture and would prefer to send additional requested pictures to interested parties. Asking Price for this Rare Package is $7500.00+Shipping. I Prefer to sell as a Package but will consider offers on any combination of rifle and/or Accessories. Thanks for looking and please e-mail with any Questions. Gary gmac556@yahoo.com
  3. WTB- HK94 USED UPPER

    Looking to purchase a used HK 94 upper only. Will take what you have if the price is right, but only need complete upper. Do not need trigger group, BCG, or stock or front handguard. Thank you, hwbaird@speedrack.net
  4. For sale, HK-94 converted into SD configuration by JA Ceiner. Weapon is on two Form 4s. Included is a black nylon carrying case and twelve HK factory 30-rnd magazines. The weapon is located in northern Virginia. Price is $35,000. Emailing me at avenger15@msn.com is the best way to reach me. Thanks for looking.
  5. Up For Sale is a Very Lightly Used (~250rds fired) Highly Sought After, Factory Original, 10.5", HK 416 OTB (Over The Beach), AI Date Code, Upper Receiver, and Lower Parts Kit. This is a 100% Factory Original Upper Receiver, Not a Parted Together Upper or PD Trade in. TheFactory HK 416Parts That Are Included With This Upper Are; The QUAD RAIL, The Factory OTB Buffer Tube, The Correct Factory Lower Receiver Back Plate, HK 416 Castle Nut, HK Concave Stock, HK Factory Pistol Grip With Water Proof Storage Compartment, HK 416 Flash Hider, HK Marked Tungsten Buffer, Factory Buffer Spring, and Original HK 416 Manual.All Original HK Factory Upper Parts Are Included. The HK 416 is Used by Our Tier 1 Operators in DEVGRU, MARSOC, and ARMY SPECIAL FORCES Groups Including CAG a.k.a. DELTA FORCE. The 10.4" HK 416 Was The Gun That MARK OWEN Used to Kill Osama Bin Laden. This is Your Chance to Own A Little Piece of History. This Upper Has All The Lattest Features Serious Shooters & Collectors Look For. Only AI and Newer Date Coded HK 416s Come With These Features From The Factory, Including The Slim Profiled Barrel Under The Handguard. These Factory Uppers Are Becoming Exceedingly Rare in This Condition and The People Who Have Them Are NOT Selling Them as They Just Keep Going Up in Value. If it Was Not For 41F BS Looming, I Would NOT be Selling Mine. There Are Some Items I Still Want Before July 13th. THIS 416 UPPER PARTS KIT WOULD LOOK FANTASTIC ON ANY REGISTERED SBR, M16 MACHINE GUN,OR PISTOL LOWER RECEIVER. ALL NFA RULES APPLY! THIS IS ASHORT BARRELED UPPER AND CAN ONLY BE INSTALLED ON TO A REGISTERED SBR, MACHINE-GUN, OR PISTOL LOWER RECEIVER!! ASKING; $8500.00 ***NO TRADES OR LOWBALL OFFERS WILL BE RESPONDED TO*** Shipping is $30 in The CONUS Paid For by The Buyer!! I Use USPS PRIORITY MAIL. Payment via Discreet PayPal, USPS PMO, or Certified Check. Feel Free to Ask For Any Pictures You Want and I Will Send Them To You. If You Want References or Feedback From Buyers on GB and HKPRO, That Is No Problem.
  6. RUNNING A SPECIAL WHILE SUPPLIES LAST. ALL GERMAN except a US LSC flat and weld kit for $1500 +s&h or upgrade to an F kit to $1850 +s&h Upgrades: Ambi burst lower +$125 Navy ambi lower +$200 Surefire forearm +$50 A3 stock +$250 A3F stock +$350 All LSC kits include: 100% German parts with the exception of a USA LSC flat and weld kit front end with a German three lug barrel, front sight tower, cocking tube, sight blade, cocking tube support and handle Magazine release assembly including the paddle magazine release Full auto bolt group A lower including the trigger pack and selector A stock or pistol end cap Rear sight drum assembly 2 small pins and 1 large pin A2 Fixed Stock SEF Lower Also, have a few VERY rare kits in-stock all as always all GERMAN except for the USA flat and weld kit: MP5k Newest build lots of upgraded parts it looks brand new $6000 Mp5 SD A2 stock and SEF lower $3500 USPS Mo or CC +3.5% Picture may not be actual kit
  7. HK43 - Uber Rare

    One of the Ultimate HK collector rifles. Only 377 ever produced with less than 200 imported into the US. This is the predecessor to the HK93. All these were imported with 15" barrels, so they do have the MB tackwelded on to make it compliant. Everyone will be like this. Same mags as the HK93 so easy enough to obtain. Im sure whoever buys this will already have a 93. I obtained two rifles from the original owner, I am keeping one. This one has been shot and I would rate it conservatively at 80+% condition, very nice for being imported in 1974. But all ORIGINAL finish. It will come with the original AL 20rd mag and leather sling as pictured. Im asking 4200 obo. Please ask any questions.
  8. What you see is what you get. $6-25 shipping USPS mo or PP +3.5% Mp5 parts 4x FBI Lowers 0-1 $500 each 2x Navy lowers $550 each 3x Surefire LED light head KX4-BKHA $55each 4x Surefire LED Light heads LM2 $85 each 1x German HK Wide forearm with a sling mount $40 1x German HK wide forearm $30 1x Surefire forearm with LED head $145 1x German Hk CA compliant lower $65 1x Unknown manufacture hammer and shank $25 2x NEW German recoil rods $40 each 1x USED German recoil rod missing delrin rings $25 1x Lot of German recoil rod parts; 3x rods, 3x springs, small bag of parts $70 UMP Stuff No pictures but all parts are brand new (unless marked otherwise) German Mags and parts: 9x UMP .40 cal mags and clamp (includes 2x mags and 2x clamps) $120 each set 35x UMP. 40 cal mag springs $10 ea or 5x for $45 17x UMP .40 mag followers 217769 $7.50 ea 7x UMP .40 LIGHTLY used followers 211769 $5 ea 3x UMP .40 Mag locking plate 217770 $7.50 ea Lower parts: 3x UMP Hammers $15 ea 6x Left Hammer springs 217533 $5 ea 13x Right Hammer springs 217583 $5 ea 7x UMP / G36 Sear springs 205421 $7.50 ea 2x UMP release lever spring 217534 $7.50 ea 2x UMP / G36 trigger sear 205439 $15 ea 2x UMP / G36 trigger 205420 $15 ea 2x UMP lower release lever for hammer 217535 $7.50 ea 5x UMP lower axle pins $7.50 ea 4x UMP cocking handle pin $5 ea Bolt group: 10x UMP bolt catch springs $5 ea 5x Bolt Catch pins 928080 $5 ea 15x UMP Barrel pins 983593 $7.50 21x UMP 40/45 firing pin springs 217523 $7.50 20x UMP ejector $35 ea 4x Bolt Catch 217540 $30 ea Receiver parts: 5x UMP / G36 hand stops filler pieces $5 ea 1x UMP front sight $10 1x UMP rear sight incomplete $15 1x UMP / G36 ambi sling loop $35 1x UMP cocking assemble complete $45 Other: 1x UMP .40 bulged barrel $65
  9. I have for sale 1 new HK aftermarket trigger housing that will accept all SEF style trigger packs. This will also fit all HK 94, HK 93 and HK 91 type HK rifles or pistols & clones. This is made by PTR-91 and made to exact HK specs and comes clipped and ready for the semi auto shelf. Counts as 1 922r compliance item. $50.00 shipping included. I accept postal MO, Paypal and CC. Add 3% for Paypal and CC. Specs can be found here: http://www.hkparts.net/shop/pc/Safe-Semi-S-F-Grip-Frame-Housing-U-S-110p840.htm
  10. What you see is what you get. $6-25 shipping USPS mo or PP +3.5% All prices are OBO Mp5 parts 1x Surefire 2 button forearm $150 3x NEW German HK A1 Pistol end caps $85ea 1x NEW German Sp89 Forearm $110 2x Surefire LED light head KX4-BKHA $55each 3x Surefire LED Light heads No model # $45 each 1x Pelican Mp5 flashlight mount #610 $45 1x German HK Wide forearm with a sling mount $40 1x German HK wide forearm $30 1x Surefire forearm with LED head $145 1x Laser for Mp5 or sp89 $175 1x German Hk CA compliant lower $65 1x German mp5 FA bolt group this group came in a gun that was imported by Springfield but it is a German group. $550 1x German FA bolt complete bolt head standard $225 1x Used German firing pin $20 1x Unknown manufacture hammer and shank $25 1x Lot of assorted pins 3x large pins and 13x small pins $24 1x Lot of German 9mm rollers 16x std 8mm and 1x -4 roller mix new/ used $37 1x Lot of German 9mm roller plates 32x $130 2x NEW German recoil rods $40 each 1x USED German recoil Rod $30 1x USED German recoil rod missing delrin rings $25 1x Lot of German recoil rod parts; 3x rods, 3x springs, small bag of parts $70 1x Lot of German trigger pack pivots and springs $12 1x Unknown 9mm ejector level $25 1x German std locking pc $55 8x German A2 Stocks as seen in picture $45 each HK .308 rifle stuff 1x NEW German HK MSG-90 stock $375 1x NEW German SR-9 Forearm $115 3x NEW German PSG-1 trigger group with trigger shoe and selector lever $750ea 1x German plastic handle for hk91 with screw and washer $7 1x NEW German Hk SG1 Scope mount with 1” inserts $450 OTHER HK STUFF 1x NEW in box Benelli M1 Super 90 stock $150
  11. Looking for an all original, German HK94A2 or HK94A3. I would like it to be in the best condition possible, however, it does not have to be perfect or a 'safe queen' as I will be converting it to a MP5-N SBR. Would appreciate the opportunity to speak with anyone that is looking to sell. Cash in hand and ready to purchase if we can make a deal. UPDATE: ITEM FOUND AND PURCHASED