All Activity

Local guy has / had one that I worked on to run reliable. His was magazine / magazine fit related and a barrel with little chamfer to feed that the bolt was peening. Suomi mags work well in the gun.

I was just about to post a mention of Frank's book. I have a copy and it's got pretty much all the history. I own two MK 760's. One made in Fruithurst, Alabama and the other made in Panama City, Florida. I've not yet added a California gun to my collection. While they can be a bit less refined than the S&W guns they can be made to run. The biggest issue is with the magazines. I have around a dozen MK magazines and maybe two of them are reliable. On the other hand, Finnish Suomi magazines will fit and function with just a bit of sanding on the front pad. I was skeptical until I got my hands on some. I've never had my Fruithurst gun run so well. The Panama City gun is a bit more finicky. It has one or two mags that it likes. But it runs really well with those two mags. One interesting note, when I first got the Panama City gun I noticed that the recoil spring was really strong. This makes me wonder if it was replaced or my Fruithurst spring was replaced or just worn out. I did replace the extractor spring in the Fruithurst gun and that helped with reliability. I trimmed a M16 selector detent spring to a proper length and it works quite well. I will say this about the MK 760's. It's not an ideal first machine gun. Many do not run reliably out of the box. They're ok if you are mechanically inclined and have the patience to tinker and tune. I know the first ones made were the Fruithurst guns. Many of those were made with original S&W parts that the two partners sourced from the company when they bought everything to manufacture the guns. Some consider these to be the best model. The Panama City guns are a little rougher. The bolt is nowhere near as smooth sliding in the receiver. The charging handle is loose in the bolt and has rubbed a groove on the outside of the receiver. The California guns are the ones with the worst reputation. The reason being that they were up against the May 19, 1986 deadline and were cranking them out as fast as possible. They were also converting the semi auto guns they had in stock so serial numbers will have different prefixes depending on what model it was born as. The early California guns had stamped sheet metal magazine wells but later guns had wells that were investment cast and those have embossed letters rather than stamped. Anyway, that's my experience in a nutshell. They're not horrible guns but there's plenty better. If I were going to advise someone on what should be their first machine gun it would be a M11/9 with a Lage slow fire upper. An Uzi would probably be number two on the list. Everything else just gets more expensive or more complicated.

I purchased this from the original owner. It was unfired when I purchased it. It probably has about 300 rounds thru it. Runs perfect.

PM sent,

Years ago I saw some guy on Youtube who was popping balloons and ringing gongs at 100 yards with a .38 snubbie. I also read somewhere that FBI stats showed that most gun fights occurred within about 7 yards or so. I get acceptable accuracy at 10-15 yards with both my Colt .38 and .32 snubbies. And by "acceptable accuracy" I mean I'm on the paper or ringing the steel. Try some different loads or just get some practice. Kevin in NC

So which is the price? This supposedly sold on GB, now it was on here at $8,600 and again at $11,600?? Can someone explain what’s going on, or is someone trying to run a scam here?

btt

Having issue finding your PM. Will be back at shop Monday and will try again then, or try my email. dave.gilmore@sbcglobal.net

bump

Bump. Willing to entertain offers.

So I shoot MG's the most but have quite a few CCW carry guns. The last few times I went to practice with the revolvers (.327 & .357) it seems accuracy sucks. Anything past 5yds is almost off the target. Do I need more practice or are these 2" subbies just that inaccurate?

SGAmmo is an outstanding outfit! I’ve ordered from them many times including some of this 50BMG - API & APIT. Buy all you can guys, these are the good old days. (I have zero affiliation with SGA other than my buying history). The pic below is this same ammo. My 1/2” AR500 plate didn’t stand a chance.

Can you pm me pics of the uzi bolt please ?

Ammo Inc, Shield, 223 Remington, 62 Grain, SS109, 50 Round Box Match Grade .223 Remington 62gr SS109. Superior accuracy and consistency thanks for load-specific engineering. Balancing velocity, accuracy and recoil, the Ammo Inc. development team carefully analyzes every load to optimize performance to achieve the specific outcome of superiority. Made in America using Hyperclean technology. The Finest Rounds on the Market Balanced Velocity and Recoil 100% American Made Components Hyperclean Technology - Shoot more, Clean less SPECS Brand or Manufacturer: Ammo Inc Model or Type: Match Cartridge: .223 Remington Bullet Weight: 62 Grains Bullet Style: SS109 Muzzle Velocity: 3000 FPS Muzzle Energy: 1239 ft-lb Primer Type: Boxer Corrosive: No Reloadable: Yes AMMO INC SHIELD 223 REM 62GR SS109, 50RD BOX $27.89 https://www.robertrtg.com/store/pc/AMMO-INC-SHIELD-223-REM-62GR-SS109-50RD-BOX-460p12632.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

Terminal Ballistics in Orange Grove Texas will build integrally suppressed 180 barrels. Just got off the phone with the owner. They rebuilt one of mine and made a can for another. Contact 361-490-4020.

BIS!

Every thing you need to know about the '76 the MK 760 (both MK760 manufacturers), The M76A1, and the Swedish K

Complete Astra Model F Machine Pistol with shoulder stock, holster, and magazines. This is one of the finest made machine pistols as it has a rate reducer that limits the full auto fire to 300 rounds per minute. You will want to throw your Mauser Model 1932 machine pistol shooting 1000 RPM over the hill after shooting this beautifully made gun. This gun is a terrific shooter! The gun is a Pre-May sample and can be transfered to a Class III dealer or an 07/Title 2 Manufacturer. $25K

PM sent for the Springfield XD. Thx

Just one available. Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures. Blaser Quick Detachable Aluminum Saddle Mount with One Inch Standard Rings, Used Excellent condition. Weight 5.6oz. current retail from Blaser is $558. This one was mounted once and is in excellent condition. Blaser QD Saddle Mount Complete with one inch standard rings. With a QD Mount, this allows the scope to be detached and/or replaced as often as required without affecting zero. The Saddle Mount also facilitates the exchange of rifle scopes with or without a rail. BLASER QUICK DETACH SADDLE MOUNT WITH 1" ALLOY RINGS, STANDARD HEIGHT $359.00 https://www.robertrtg.com/store/pc/BLASER-QUICK-DETACH-SADDLE-MOUNT-WITH-1-quot-ALLOY-RINGS-STANDARD-HEIGHT-15p13604.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

Just one available. Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures. Blaser Quick Detachable Aluminum Saddle Mount with One Inch Low Rings, Used Excellent condition. Weight 6.6oz. Current retail from Blaser is $558. This one was mounted once and is in excellent condition. Blaser QD Saddle Mount Complete with one inch standard rings. With a QD Mount, this allows the scope to be detached and/or replaced as often as required without affecting zero. The Saddle Mount also facilitates the exchange of rifle scopes with or without a rail. BLASER QUICK DETACH SADDLE MOUNT WITH 1" ALLOY RINGS, LOW HEIGHT $359.00 https://www.robertrtg.com/store/pc/BLASER-QUICK-DETACH-SADDLE-MOUNT-WITH-1-quot-ALLOY-RINGS-LOW-HEIGHT-15p13605.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

Sold as is. By purchasing this item you will receive the EXACT part shown in the picture. New in wrap, original German HK93 forest camo 25rd steel magazine. Hard to find, original 80's import. GERMAN HK93 FACTORY FOREST CAMO 25RD STEEL MAGAZINE NEW $229.95 https://www.robertrtg.com/store/pc/GERMAN-HK93-FACTORY-FOREST-CAMO-25RD-STEEL-MAGAZINE-NEW-114p13596.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

Microtech Knives started in 1994 with one mission: to make the best knives possible. From OTF and automatic knives to pocket folders and fixed blades, their knives are designed and engineered to extremely high tolerances for ultimate performance and reliability. Microtech Knives https://www.robertrtg.com/store/pc/Microtech-c604.htm Thanks for looking and happy shooting! RTG Parts 931 Frank St. Sheridan, WY 82801 Phone: 307-675-1191 Email: brayton@rtgparts.com

Bump

please edit your title …. Remove WTS