Ryo Posted September 19, 2022 Report Share Posted September 19, 2022 (edited) Item for sale is a bullet feeding guide for the MCR, otherwise known as the Shrike/MCR feed insert. The design and current dimension for this is based on my own measurements and trial & error, but the idea came from Mark G.'s design. After many iteration of the design, I finally came out with one I'm happy with. I have test fired and had no reliability issues. A board member generously lent his original insert to me. I used it to do some comparisons to mine version. I did not do live firing on his when comparing since I didn't want to risk damaging it, however I did test it on a version I duplicated from the original and it fired without issue. --------------------------------------------- Your choice is to purchase my design, or a clone of the original. Price for one is $90 shipped via USPS. Price for two is $170 shipped via USPS. If you need a different carrier, let me know and I can let you know the price difference. Payment method is Zelle, Venmo, or PayPal (you pay the fee or pay Friend & Family) --------------------------------------------- Earlier proof of life video: https://vimeo.com/735885372 My observations between his and mine dealing form/fit/function were: My bullet guide is a bit more aggressive design to force the bullet nose up. I had done this on purpose to ensure the bullet tip would be guided more towards the center of the chamber. The fit of the original was very loose. Every time opening the top cover it would fall out. My version I added a ball detent to keep it in place. Not a big deal since you could have shimmed the original in. Note 1: My design (before I received the original insert) was actually form fitting to my top cover, but since original one was more narrower, I decided to match it. I wanted to ensure that mine would fit in all top covers. I had heard from some owners of the original insert that the fit was tight. I added the ball detent to ensure it keeps it from falling out. I tell you.. it was annoying to have to hold the insert in place when closing the top cover. Note 2: I could have done the shim method.. but it really gets tight. If you wanted to remove it, it would have been a struggle if it was tight. I did experiment with adding built in shims to file down but I found it was really tight. Plus there was no guarantee that the shim I used material would not eventually compress under fire, hence it would falling out like the original in the future. The ball detent is a bit more work and cost more to do, but it offered a great benefit. My guide section is a bit concaved in the shape to the shape of the bullet head. I doubt this makes mine better or worse than the original. The purpose was to give it enough space to not interfere with the feeding assembly. The slide ramping of when the bullet pulled into place is a bit different angle at the shoulder. The original is smoother due to how it was molded. I don't think mine will have any negative affect here, but definitely the original is smoother than mine. The original is more brittle. Due to the material it appear it could chip. The loaner I borrowed has a very minor chip due to the material going to a thin peak. I made mine a bit thicker due to that observation. Is the mine better than the original? Perhaps, but I can't tell with the small sample size of shooting. Will this fix every issue with the MCR? No it will not fix every issue of the MCR. Some of the later generation MCRs are less sensitive to feeding due to the feed plate. However with the guide, it would force the bullet head to center more towards the the chamber. How long will it last? I can't say since I have only a couple hundred rounds though my testing. After the test firing, it looked like it had little to no wear. Since the bullet was not designed to scrap and slide on the guide, I believe it should last a long time. Since this a design based off of a specific MCR, there may be some sanding or fitting required. I tried to eliminate some of that with the ball detent, but I can't guarantee the milled depth being deeper or more shallow. If you have issues, I would want to know so I can make this product better. If you have any questions, please feel free to ask. Edited November 5, 2022 by Ryo 1 Quote Link to comment Share on other sites More sharing options...
AirCav73 Posted September 19, 2022 Report Share Posted September 19, 2022 I'll take one. PM on the way Quote Link to comment Share on other sites More sharing options...
Murdock Posted September 19, 2022 Report Share Posted September 19, 2022 Pm sent about two of them. Thanks Quote Link to comment Share on other sites More sharing options...
ComicalGrub503 Posted September 20, 2022 Report Share Posted September 20, 2022 I'll take one Quote Link to comment Share on other sites More sharing options...
Ryo Posted September 20, 2022 Author Report Share Posted September 20, 2022 Thanks guys. BTW please be sure to mention that you want the clone of the original or the one I designed. Also include your preferred payment method. I also forgot to mention that if you need to pay via check, let me know. I will accept a check, but won't ship until it clears. Thanks. Quote Link to comment Share on other sites More sharing options...
Ryo Posted September 27, 2022 Author Report Share Posted September 27, 2022 Bump Quote Link to comment Share on other sites More sharing options...
Ryo Posted October 25, 2022 Author Report Share Posted October 25, 2022 Bump Quote Link to comment Share on other sites More sharing options...
Ryo Posted November 29, 2022 Author Report Share Posted November 29, 2022 Bump Quote Link to comment Share on other sites More sharing options...
CIMG in Fulton MO Posted December 2, 2022 Report Share Posted December 2, 2022 Ill take one. Pm sent Quote Link to comment Share on other sites More sharing options...
Westwind Posted December 2, 2022 Report Share Posted December 2, 2022 I will take one. Pm sent Quote Link to comment Share on other sites More sharing options...
Ryo Posted December 2, 2022 Author Report Share Posted December 2, 2022 All PMs responded to. BTW I'd love to hear feedback on the part I made. So far I heard from one guy who made a purchase because another user who bought it from me recommended it because it fixed their issue but this is hearsay.. I want to make this part better if needed. Thanks. Quote Link to comment Share on other sites More sharing options...
Westwind Posted December 9, 2022 Report Share Posted December 9, 2022 Feed guide arrived today. Fast shipping. Thanks! Quote Link to comment Share on other sites More sharing options...
Ryo Posted March 6, 2023 Author Report Share Posted March 6, 2023 Bump Quote Link to comment Share on other sites More sharing options...
Ryo Posted March 20, 2023 Author Report Share Posted March 20, 2023 Bump Quote Link to comment Share on other sites More sharing options...
Ryo Posted June 7, 2023 Author Report Share Posted June 7, 2023 Bump Quote Link to comment Share on other sites More sharing options...
Rifleman 173 Posted June 21, 2023 Report Share Posted June 21, 2023 I will take 2 of your guides, PM sent. Quote Link to comment Share on other sites More sharing options...
Mile High Armory Posted July 10, 2023 Report Share Posted July 10, 2023 I'll take one, PM sent. Quote Link to comment Share on other sites More sharing options...
Maddog7580 Posted July 10, 2023 Report Share Posted July 10, 2023 Anyone have a pic of this installed they could post? Quote Link to comment Share on other sites More sharing options...
Ryo Posted August 23, 2023 Author Report Share Posted August 23, 2023 (edited) Here you go. Sorry for late reply. This is a photo of a clone of the original.. Sorry I don't have images of my new version on my phone, but this will give you an idea of where it goes. Edited November 27, 2023 by Ryo Posted the wrong image. This was a clone I was trying of the original to compare Quote Link to comment Share on other sites More sharing options...
Maddog7580 Posted August 23, 2023 Report Share Posted August 23, 2023 So, your devise helps the cartridge angle so it feeds into the chamber and strip it out of the link? Does this fit all of the shrike uppers? I have a MCR060S Quote Link to comment Share on other sites More sharing options...
Ryo Posted August 24, 2023 Author Report Share Posted August 24, 2023 From what I can tell is yes it fits all of them. I know there is play among different top covers so I added ball detent to deal with some play (and keep the part in the top cover when opening). The side without the detent can be filed down to make a better fit. However since I don't have every top cover, there could always be some variance. I've sold quite a few of these and no complaints so far about fit. Please PM me your dimensions of your top cover and I can double check. Quote Link to comment Share on other sites More sharing options...
ri2005 Posted September 26, 2023 Report Share Posted September 26, 2023 I'll take 1. Quote Link to comment Share on other sites More sharing options...
Ryo Posted September 30, 2023 Author Report Share Posted September 30, 2023 (edited) Send me a PM. Edited October 3, 2023 by Ryo Quote Link to comment Share on other sites More sharing options...
Qship Posted October 6, 2023 Report Share Posted October 6, 2023 PM sent Quote Link to comment Share on other sites More sharing options...
VidaEterna Posted October 10, 2023 Report Share Posted October 10, 2023 (edited) I’ll take one per our conversation. Funds sent last night. Thanks. Finally got around to trying it out. I ran 30 rounds thru my MCR and no jams! The best I got out of it before was 3 rounds and a malfunction. The range wouldn’t allow green tip, so 30 55grn was all I had on me. I need to shoot it much more, but so far I’m excited again about my MCR. Edited January 16 by VidaEterna Used the product and it worked Quote Link to comment Share on other sites More sharing options...
Ryo Posted November 24, 2023 Author Report Share Posted November 24, 2023 Bump Quote Link to comment Share on other sites More sharing options...
Lt_dan Posted January 10 Report Share Posted January 10 (edited) Any feedback from anyone is using it? Interested in 1 Edited January 10 by Lt_dan Quote Link to comment Share on other sites More sharing options...
Ryo Posted January 15 Author Report Share Posted January 15 I've had a couple of customers mentioned that it worked perfectly for them. One person tried to see how much of the bullet still contacts the feedramp/barrel extension. They said the bullet never scratched off the paint he had placed on the bullet, hence my guide guided the bullet into the barrel cleanly. Quote Link to comment Share on other sites More sharing options...
Cargoman45 Posted January 24 Report Share Posted January 24 Also would you be willing to receive payment through Cash app? Can I get a feed guide of your design. Quote Link to comment Share on other sites More sharing options...
Ryo Posted January 25 Author Report Share Posted January 25 I am not setup for Cash app. I sent you a PM. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.