LCWDuraCoat

I am willing to break up the sets into smaller amounts if anyone is interested. I could do sets of 100 for $1800.

I recently went through a similar process. When you file your Form 3s to transfer to new FFL, you should include a letter stating the date you plan to close out your old FFL. If you have any items that you want to sell on Form 4s, you can also include that same letter with the end date to significantly speed up the process. This is especially helpful if you have customers that don't want to wait a year. You would get the approved forms back by the end date stated on your letter which could be weeks. You must have an 07/02 if you want to keep your posties. If you don't want to keep them, this is the opportune moment to get them sold without letters. As for differences between a sole proprietor FFL and and LLC FFL, the biggest and most important difference is that when you close out your FFL for good you would have to still keep that LLC running to keep the NFA. Where as, if you had a sole proprietor FFL, everything just becomes yours personally. That can make a big difference for some people.

We are selling the remainder of our .22 suppressor parts as we are no longer manufacturing them. There are enough parts for approximately 550+ cans. This is everything you need to create your own line of .22 silencers!! The parts are T6 aluminum and ready for marking and assembly. Some tubes are slightly too long and may require minor adjustments to get the proper tight fit. Simple washer and spacer design. Threaded for 1/2x28. Blueprints are available if you want to have more parts machined. Must have 07 and SOT to buy. Contact me with any questions. $10,000 for all 550 sets which comes out to approximately $18 each. Shipping is not included and will be at your expense.

Lakeside Machine Collection - This collection appears to be UNFIRED and was on display only. It comes from the estate of Steven Lauer founder of Lauer Custom Weaponry and inventor of DuraCoat Firearm Finishes. Lot includes: - .17 caliber Vindicator - LM7 full-auto upper mounted on LCW lower, includes manual (shown with LCW Predator suppressor, will sell with or without (on Form 3)) - Razorback SBR full-auto rated upper with 4" barrel 1of 100, includes manual (shown with Coastal M11 suppressor, will sell with or without (on Form 3)) - Razorback pistol kit, includes instructions for swapping out rifle upper - Extra parts, links, and belts as shown in photo

.22 Suppressor parts still available. Everything else is sold.

Sale fell through. These are still available.

WANT TO SELL FOR 07s ONLY!!!! Suppressor/Silencer parts. We are closing out our suppressor manufacturing business and want to find a new home for the remainder of our parts. Listed here is information about the two types we have the most of. First, LCW Predator Suppressor .22LR STILL AVAILABLE Made from T6 aluminum. RAW. Thread: ½ x 28 Dimensions: 6'' long, 1'' diameter. Weight: 3.4 oz. Can be disassembled for cleaning. We have enough parts for approximately 570 of these with extra spacers and washers for repairs in case of strikes or wear outs. Parts included are threaded tube, end caps, spacers, washers. Very simple design. I am asking $40 each for a total of $22,800. I am willing to sell them in smaller batches of 100 for $50 each. These are ready to be assembled, marked, and registered. There is a small number of tubes that do require that they be shortened about 1/1000 before a tight fit is achieved. One complete registered suppressor can be included as a sample so you know how to assemble. We do have about 50 or so of these complete and registered as well for $150 each. We retailed these at $250 as an inexpensive alternative to the higher priced "fancy" silencers dominating the market today. Shipping will be at buyers expense. Bottom Photo Second, LCW Subgun Suppressor 9mm and .45 SOLD Made from aircraft grade aluminum. Dimensions: 12” long, 1.75” diameter. Weight: 20oz. For use on rifles and subguns. Can be disassembled for cleaning. Black Anodizing. Approximately 1/3 of the end caps and baffles are sized for .45. The rest are for 9mm. Holes could easily be milled out for larger calibers. This awesome design includes adapters we call "Interconnectors" that allow you to change the threading to accommodate many different weapons. Interconnectors available in Uzi (26 x 1), M-11 9mm (3/4 x 10), M-11 380 (5/8 x 11), Mac 10 in 9mm (3/4 x 10) and 45 7/8 x 9), ½ x 28, ½ x 32, ½ x 36, and 11/16 x 28 for bolt action and AR type weapons in 9mm and 300 whisper. There are various quantities of each thread size. Some with as few as a dozen and others many more. Enough to build the suppressors and sell them with several adapters included. There are enough tubes, baffles, and spacers for approximately 70 complete cans with many extra interconnectors. These are ready to be assembled, marked, and registered. I asking $75 each to be sold in batches of 10 or $5,000 for all of them. One complete registered can will be included as a sample if you buy all of them. Shipping will be at buyers expense. OTHER: I also have small quantities of parts for other calibers and a very small amount of completed cans in various calibers. All of these are bare bones, simple industrial style suppressors great for just getting the job done without all the fancy stuff. Let me know if you are looking for something specific and I'll see if we have it. SOLD