dakotastomm

Price drop

I'm in sweetwater. I am in Knoxville every day tho.

Sold all my 1919 stuff and this is the last thing I've got. This is in overall good good condition for its age and everything works as it should. The tripod appears to be dated 1946 and the t&e is 1943. Tripod is serialized. I'm unsure of the manufacturer of the 1919 adapter but it seems to be high quality as well. It has the ability to attach a 30 cal ammo can to the side to allow ammo to feed. It also comes with some type of trigger crank, but im not sure how it attaches or works. I tried to search around to see what these tripods are going for and was met with little to no results. I did see just a tripod alone go for 2000 on gunbroker not long ago Price is $1500 and split shipping. This is a heavy and bulky item. I am located in East Tennessee, just south of knoxville. Will meet within reason. If it's still available by then, I can also deliver to knob creek. I will also split the tripod and adapter separately if there is a buyer for both. $1150 on the tripod and $350 on the adapter. More pictures upon request. Payment can be sent via zelle, discreet PayPal plus any fees, credit card plus 5% or usps money orders for this item. If you have any questions, please contact me. Additional photos can be viewed here: http://imgur.com/a/oTkdfQA

Up for grabs is 1000 rounds of Portuguese 7.62 nato ammo. This stuff is sealed in 200 round battle packs. Non corrosive berdan primed brass case stuff. Great shooting ammo. Shot a case of the same lot through my 1919 shortly before selling it. Ammo is available for pick-up FTF around knoxville, tn. Price per battle pack is $160 or will take $750 for the lot of 5. Due to shipping costs, the crate is not included unless all 5 packs are picked up local. Buyer to pay exact shipping and insurance costs on this item. Payment to be sent via zelle, discreet PayPal, or card plus 5% or cold hard cash ftf. These are Cross Posted so first ill take it gets it. (The loose ammo was from the other crate of the same lot and is not included)

Knob creek special. Pick up at knob creek or on the road in-between knoxville, tn and west point ky. 14 cans left, 3500 rnds, for $2500 Up for grabs are fourteen (14) 250 round cans of yugoslavian (made my prvi partizan aka ppu) 7.92x57 (8mm mauser) ammunition. This is the better 1980s manufactured m49 and not the trash 1950-60s stuff that's more commonly found. The 70s and 80s yugo 8mm is some of the better surplus 8mm on the market. This features a 198gr projectile in berdan primed brass cases. It is corrosive so gun will need to be cleaned afterwards. This particular ammo is linked on browning 1919 links with a light coat of oil. It can be left as is and can be fired in 1919s chambered in 8mm or easily delinked and ran in any bolt action or semi auto 8mm mauser rifle. Whats nice is the links and starter tab are worth about $25 by themselves and ammo cans are about $10 so easy to get some money back. I can also delink this ammo for you for a small fee. Due to the light coat of oil/grease, these rounds may be slightly tarnished from years of storage. 10 of the cans are perfect, but 4 cans do have some black tarnish on the first 1-2 layers. Came off with some 0000 steel wool. But did not affect anything. The 70s-80s dated stuff is very rarely seen available. The 50s-60s dated stuff is alot more common and is not very good ammo. This is surefire and no issues like the 50s and 60s stuff. Due to the oil and links, there may be some slight stains on the brass or projectile but it does not affect functionality. Cans are available for pick-up FTF around knoxville, tn. Local pickup only if you want all 14 cans, unless you want to pay for shipping on it all. Price per can is $225 or if you want all 14 cans I'd do $2,900 total. Buyer to pay exact shipping and insurance costs on this item. These cans weigh roughly 22lbs each. Payment to be sent via zelle, discreet PayPal, or card plus 5% or cold hard cash ftf. These are Cross Posted so first ill take it gets it.

Ready for immediate form 3!

This Post-86 Dealer Sample machine gun is being sold as a no law letter gun as we will not be renewing our ffl or sot come July 1st. As per ATF § 479.105 (f), a MANUFACTURER or IMPORTER FFL with a valid and current SOT may take possession of this machine gun WITHOUT the need for a law enforcement demonstration letter. Type 01 Dealers with a SOT may also purchase, but will require a law enforcement demonstration request letter in order to take possession of this item. We will efile the form 3 for faster approval. For grabs is a DNA Guns LLC M16. These receivers were m16 cut from the beginning so no crappy conversion here. Receiver is marked Safe, Semi, Auto. Every other parts factory FN. Chrome lined and cage code marked barrel, f1 marked carrier, F marked upper, cage code charging handle, etc. Our manufacturer mark is located just below the original makers marks on the right side above the fcg pins. With other No demo letter M16 receivers that are stripped and going for nearly $1800 alone, here is your opportunity to get a complete one ready to rock and roll! Price is $2400 shipped. Ready for immediate form 3 transfer. Must have current 2021 ffl and sot. If you have any questions or would like to see more pictures or videos of this Gun, please do not hesitate to reach out. AGAIN, THIS ITEM IS ONLY AVAILABLE FOR PURCHASE TO FFL/SOT HOLDERS. IF YOU ARE AN INDIVIDUAL OR DO NOT HOLD AN FFL/SOT, YOU CANT PURCHASE THIS. Payment is to be sent via wire transfer, cashiers/certified/business check, credit card plus 5%, zelle, paypal or usps money orders. Payment is to be received within 7 days of auction end. If sending check/money order, it must be sent via a trackable service. Payment may be held for up to 14 days to clear the bank. Due to the nature of the item, it is sold as is no returns. We will do everything to make sure you are satisfied but since these are restricted items, we can not just form 3 them back. If you have any questions or concerns please reach out. As stated above, I will be e-filing the form 3 after payment clears. Eform 3 approvals are generally 24-72 hours but may take longer due to current ATF backlog. Photos can be viewed here: http://imgur.com/a/pztnd85

Price updates. Ready for immediate form 3 filing!!

1919 sold!

Monday afternoon bump. Small price drops

Tuesday afternoon bump. Quite a bit of interest in the m2, but no bites yet!

Bump! Don't be afraid to reach out with any questions

bump

These Post-86 Dealer Sample machine guns are being sold as a no law letter gun as we will not be renewing our ffl or sot come July 1st. As per ATF § 479.105 (f), a MANUFACTURER or IMPORTER FFL with a valid and current SOT may take possession of this machine gun WITHOUT the need for a law enforcement demonstration letter. Type 01 Dealers with a SOT may also purchase, but will require a law enforcement demonstration request letter in order to take possession of this item. We will efile the form 3 for faster approval. Additional photos or videos available upon request. TRADES: I am open to trades! I'm interested in pre sample "keeper" or transferable machine guns. If you would like to make a trade offer or cash offer close to the listed price, please contact me. Payment for these items are to be sent via wire transfer or bank/personal/business checks or usps money orders. Checks may be held up to 14 days to clear before filing the form 3. *M2HB IS SOLD* First Up for grabs is a browning m2hb belt fed 50 cal. Also known as the browning m2 or the MA Deuce. This Gun was built on a KMP side plate and is a registered receiver gun. Was built using original browning m2 parts and runs great. A few high wear items were replaced as well as all new springs were installed as the originals were 60+ years old. A new old stock Sabre defense stellite/chrome lined barrel, a new usgi current issue buffer assembly, nos rear sight assembly and nos retracting slide group were all sourced to update it to modern components. The original blued/nitride barrel is included but it has seen heavy use over the years. Still passes bullet test but no way to gage wear. Does have some minor external and inner pitting. The trunnion, top and bottom plate and the left side plate all feature the same assembly serial number meaning they all came from one original gun. Original manufacturer was Rock Island Armory with 1.1 million serial number which would put it somewhere in mid to late 1940s from my estimates. The remaining parts feature various manufacturer codes from HS to AC to K. This Gun has had the bolt hold open parts installed which allows you to shoot the gun in single shot as well as full auto. The gun also has a stainless steel trunnion protector to protect the trunnion from wear or damaged from the steel links while in use. An Israeli barrel carrier is installed on the Sabre defense barrel as well. Included but not pictured is also a nos m12 hand held linker/delinker as well as a set of headspace and timing gages. Also included is 800ish rounds of once fired brass and 800ish once used m9 links in 50 cal ammo cans. This will also include a military issue m3 tripod assembly, pintile and t&e. No reproduction parts here. All 3 parts have various assembly numbers and are in good shape. Tripod has never been demilled and legs extend with no issues. However during shipping, the front leg lock bolt sheared off. Replacement can be had for less than $15 but it does not affect functionality so I have not replaced it yet. Have a few pricing options for this. If you would like the gun, both barrels and the tripod assembly it is $25000 delivered. $23,500 delivered for the gun and 2x barrels no tripod assembly. $23,000 delivered for the gun and the Sabre defense barrel. Additional photos can be viewed here: http://imgur.com/a/VrQLKsc http://imgur.com/a/SMUI0no Video of the gun running can be seen here: *M2HB IS SOLD* And finally up For grabs is a DNA Guns LLC M16 receiver assembly. These receivers were m16 cut from the beginning so no crappy conversion here. Receiver is marked Safe, Semi, Auto. This features a standard mil spec full auto fire control group. Standard milspec spring and Buffer installed as well. Will include a magpul moe stock and pistol grip. We have 2 (two) of these complete lower assemblies available. These have consecutive serial numbers but are identical otherwise. Our manufacturer mark is located just below the original makers marks on the right side above the fcg pins. With other No demo letter M16 receivers that are stripped and going for nearly $1800 alone, here is your opportunity to get a complete one ready to have your upper slapped on it with no additional work! These are $1500 each and are identical. If asking price is met, we will cover shipping and insurance on these items. If you're local, we can deliver them. Additional photos can be viewed here: http://imgur.com/a/sX6zIrK

Clearing out some of the extras that I've never even shot. Items are cross posted so first ill take it gets it. Item is in my ffl inventory and must ship to ffl. Payment to be made via zelle, discreet PayPal plus any fees or card plus 5% or usps money order. Up for grabs is a new, unfired rex silentium MGX with .458 bore. It features 15 baffles, and comes with the original 5/8x24 barrel adapter as well as an energetic Armament TI 11/16x24 adapter (a $75 value). I had planned on using this on a .45-70 lever action but ive Decided against it. Since is has a .458 bore, it can be used on a multitude of rifles. This is on a form 3 in tn and will ship to your dealer tax free. You will then do the form 4 at your dealer. Rex silentium currently has a 35-40 day lead time. And retail on the can and EA mount is nearly $1100 after shipping. Only asking $700 shipped and insured for this and there is no lead time (other than the filing of the form 3) More pictures upon request.

THIS IS CURRENTLY SPF Can be seen running here: https://www.instagram.com/p/CIuEcaXBFA4/?igshid=btnhfc1twgzu Gen 1 tactical innovations am15 setup Open bolt twenty two upper for m16. Includes the open bolt fcg. Must be used with an m16 lower and runs at 1200rpm. Drops right in to a standard m16 lower. Barrel is threaded 1/2x28 for suppressor use. Runs best with high velocity round nose stuff. 7x 275drum 2x 165drum 9x Aluminum bottom plates 3x winders 2x loading trays Looking for 3k plus shipping. I would consider splitting if I had a buyer for both packages. One package would be the upper assembly and its bits with 1x 275 round drum and winder with loading tray for $1850 and the remaining drums, winders, loader, etc for $1350. Both plus shipping.

To the top

one and only price drop.

Top.

Testing the waters here, but up for grabs is a factory imported pre 86 dealer sample HK MP5A3. These can only be purchased by those who possess a current FFL and SOT. These are called "keepers" as you can keep the MG even if you let your FFL/SOT expire. This can not be owned by anyone without those. Overall its in good shape. I believe it was refinished at one time. Does have some scratches in the finish. Receiver is ID date coded and stock, barrel, bolt and carrier and handguard are IC date coded. It is papered as an A3 but I received it was an A2 so I sourced a proper IC date code A3 stock. It still retains its original blue/grey finish. The only downside to the gun is that the bore is worn. But there is still plenty of life left in it. It was an old PD trade in gun that saw a fair amount of use in its time. Don't get me wrong, the bore is ok but does have some micropitting along the bore. Still has good lands and groves. It will comes as pictured with the ambi 0-1-3-F three round burst pack as well as 1 (one) german date coded mags. As well as a german wide handguard. The remaining german mags are available for purchase with the rifle as well. Looking for $14,500 plus shipping. It will Transfer out on a Form 3 and I efile. I am willing to accept payments over a reasonable time period. The following ammo is availablefor purchase with the mp5: 400+ blazer 115gr brass 500 124gr nato spec brass 350 lawmen 147gr sub 50 ppu 158gr sub 225 steel 115gr More pictures or firing videos are available upon request. I am also open to trading towards other pre-86 dealer sample firearms.

Still looking

The rug barrel is threaded 1/2x28 with integral 3 lug. As pictured here: https://www.robertrtg.com/store/pc/UZI-N-SMG-9-375-quot-3-LUG-BARREL-THREADED-1-2x28-NITRIDE-FINISH-p6809.htm As for a video, yes we did have one but seems to be corrupt. It'll be a few days before this stay at home order is let up and then we can re shoot it. However it does run great in both full and semi auto.

To the top. Open to other pre may samples as well.

Price drops. Still looking to trade towards a pre may mp5

And if you don't want any of the extras, I'd take $6000 plus shipping for the uzi in 'stock' form.