Search the Community

Showing results for tags 'bmg'.

Found 13 results

  1. Mint Mk 93 soft mount for the Browning 50 cal gun. Includes the Universal Pintle Adaptor, ammo box holder and new brass/links bag. This mount works excellent with the M3 tripod. It provides a buffered recoil as well as a mount for the ammo can. The UPA allows the mount to attach to a vehicular ring/turret. $2750 plus shipping. For more info email codeofarmsllc@hotmail.com or call 580-938-2964
  2. Mint WW2 M63 AA mount for the 50 cal BMG. Includes side plate trigger mechanism. Early solid brass base has new ball bearings. Original grips. All pins and chain intact. Includes ammo can and holder. $2750 plus shipping. Email for more info codeofarmsllc@hotmail.com or call 580-938-2964
  3. Very nice fully transferable E.R. Maples M2HB. My personal gun that I will probably regret selling. I have owned 3 of these and this is my last one. Runs flawlessly. Includes a WW2 M3 tripod that is serial numbered to the gun, USGI barrel that gauges new, carry handle, T&E, pintle, gauges with USGI pouch , USGI cleaning kit and transit case as pictured. The gun will include and ship in a fitted Pelican case. $38,995. Selling out my complete collection of BMG stuff, M63 AA and MK93 mounts, optics, tools, spares, 3K of ammo, etc. all available for sale as well. Call Al Walton @ 580-938-2964 or email codeofarmsllc@hotmail.com. E-Form 3. More pics available.
  4. Headstamps look mostly to be 10, 11, 13, 14 and 15. I hand packed these in the boxes shown. I pulled any that had obvious damage, which was only a like a half-dozen out of a couple thousand total cases, and these were just some dents on the neck, no splits or anything egregious like that. They are packed 336 pieces per box. M9 links packed in boxes. Approximately 10# per box (scale may be +/- a couple ounces). There are approximately 28 links per pound, so that is about 280 links per box.
  5. We are having a Huge "HOT SUMMER SALE" On All Barrett 50Cal BMG Rifles. In Black, OD Green, FDE, Gray and Burnt Bronze. Barrett 82A1 50 BMG M82A1 NIB 29” Black With Leupold Mark 4 Scope Barrett Rings - $7750. Without Leupold Mark 4 Scope Barrett Rings $6650. Barrett 82A1 50 BMG M82A1 NIB 29” OD Green, FDE, Gray and Burnt Bronze With Leupold Mark 4 Scope Barrett Rings - $7956 Without Leupold Mark 4 Scope Barrett Rings $6850. Visit us at www.Ratworxusa.com or GunBroker.com under seller "Candu-rat worx" or call us at the following telephone numbers 1-800-675-6906 / 1-815-734-7346 / 1-815-734-4676 or email us at (guns@ratworxusa.com)
  6. We are having a Huge "HOT SUMMER SALE" On All Barrett 50Cal BMG Rifles. In Black, OD Green, FDE, Gray and Burnt Bronze. Barrett 82A1 50 BMG M82A1 NIB 29” Black With Leupold Mark 4 Scope Barrett Rings - $7750. Without Leupold Mark 4 Scope Barrett Rings $6650. Barrett 82A1 50 BMG M82A1 NIB 29” OD Green, FDE, Gray and Burnt Bronze With Leupold Mark 4 Scope Barrett Rings - $7956 Without Leupold Mark 4 Scope Barrett Rings $6850. Visit us at www.Ratworxusa.com or GunBroker.com under seller "Candu-rat worx" or call us at the following telephone numbers 1-800-675-6906 / 1-815-734-7346 / 1-815-734-4676 or email us at (guns@ratworxusa.com)
  7. For Sale: Premium RIA M1919A4 Parts Kit. Excellent to new condition parts. Most of the parts are marked RIA, including the Barrel Jacket, Bottom Plate, Bolt, Barrel Extension, Lock Frame parts, Back Plate, etc. New left side plate, with all of the parts to assemble. No right side plate. SOLD, but we have more parts. Call us! Call with any questions: 775/671-7500 We also have a couple of other kits, SG, BA marked. Call for details. Thanks, BMG Parts Co.
  8. WTS- 50 BMG AMMO COMPONENTS

    *NOTE* The 10K of Ammo is SPF but the Components are still available. Also have a large quantity of sized and polished API Bullets. 10,000 rounds of 50 BMG API Ammo- Pulled API projectiles were resized prior to loading Once –fired LC and PMJ Brass trimmed to 3.900” Primer pockets swaged CCI #35 Primers Loaded with 228 Grains IMR5010 Packed 150 rounds per .50 Cal. Can 67 Cans Total (10,050 Rounds) *SPF* $20,000 Picked up in NE Ohio, or delivered to Knob Creek in April Also have the following 50 BMG components- 30,000 LC / PMJ once fired brass resized, trimmed and swaged primer pockets 1600 lbs. WC888 powder 25,000 CCI #35 Primers Projectiles all sized round and polished- 2,000 South African Ball 2,000 Thunderbird Brass M33 2,000 “Blue Tip” Incindiary 2,000 AP 2,000 APIT (Hand Pulled) 1,500 Spotter Tracer 2000 Tracer (Maroon tip) $50,000 OBO Picked up in NE Ohio
  9. Looking for about 2,000-4,000 rounds of .50 bmg ammo. Prefer APIT and/or Spotter-tracer. Prefer linked. Thanks!
  10. Have 2 M2HB Barrels, Stellite Lined Current issue, that are as new very slightly used, out of wrap, 98% finish 700.00 ea. 2 Complete right side charging cocking handle assembly all new with large plate ready to mount on the side plate 300.00 1 Very rare M10 side cocking handle group with pull cable complete all in new condition 175.00 1 Barrel carry handle 50.00 1 Head space and timing set gauge 45.00 Rear sight ladder complete (No Bracket) 40.00 Front sight with Hood 35.00 Complete Breach block assembly that bolts into bottom of receiver That locks up the bolt complete with block and all parts with flat spring and large bolt and nut 75.00 ea. M2HB Exc. T&E mechanism 100.00 M2HB Dual rail QD Scope mount 125.00 M2HB Buffer housings new in wrap 125.00 ea.complete with Internal spring buffer group 200.00 ea. M2HB Barrel support new in wrap, with Shim 185.00 ea. M2HB Barrel extension, excellent 200.00 M2HB Spare parts survival set with the following; All NOS New condition! Super deal on all the hard to find parts in a set to put away for your expensive baby! Recoil spring group complete Firing pin Firing pin extension Timing Screw assembly Feed slide arm for top cover Sear bar Sear Side pins, for bolt Release lever for top of bolt Extractor switch set for inside receiver Feed pawl assembly parts for top cover Cartridge guide front and rear set Extractor assembly Breech block assembly Accelerator Various springs, flat and round, Rear takedown spade grip release Belt feed slide assembly Bolt switch Top cover handle latch Belt holding pawl Trunnion pin long, for belt pawl All for only 400.00 for the entire set!! If you want individual parts only, please ask, I may be able to accommodate your needs! 828-773-1938 GPrue8@aol.com is best to make sure its not going to spam as is happening sometimes.
  11. Don't struggle trying to make worn-out parts work! I have two (2) stripped, NOS M2 .50 BMG barrel extensions; one still NIW, and the other unwrapped. Both are flat out new, but the unwrapped one has some very slight finish wear on some high spots - maybe 3-5% wear. $200 each, shipped. One (1) NIW M2 .50 BMG rear sight, current style. $150, shipped. Payment by USPS money order only. Any other payment instrument will be returned uncashed and items relisted. FYI, my mailing address is a PO Box because the USPS doesn't deliver to the house out here in the desert.
  12. Please read first SOLD SOLD SOLD WTS: 1919a4 # 2 kit good points,,, NOS RIA Bolt, NOS top cover, slide and other small parts with 3 extra 30-06 belt holding pawls, the lock frame is marked BA.. barrel bore 7.62 nice and shiney. alot of other parts look either new with storage wear or very slight wear. Bad points,,, no top plate, top cover feed pawl & lever pin and extractor , and the bottom plate can be used but needs work soooo hence the price of $ 900 plus $20 for shipping. Please contact me direct at ajmdreammg42 (at) yahoo (dot) com http://i251.photobucket.com/albums/gg288/ajmdreammg42/20160201_202743_zpsznzvvuou.jpg http://i251.photobucket.com/albums/gg288/ajmdreammg42/20160201_202759_zpsqhpwug36.jpg http://i251.photobucket.com/albums/gg288/ajmdreammg42/20160201_202810_zpscmlfjkhl.jpg
  13. SOLD SOLD SOLD READ Description first please WTS: 1919a4 # 1 kit good points,,,(have 2 kits total to sell) NOS RIA Bolt, NOS top cover, slide and other small parts with 3 extra 30-06 belt holding pawls, the lock frame is marked W for westinghouse. and the breech block cam is a Remington marked but corroded. barrel bore 7.62 nice and shiny. alot of other parts look either new with storage wear or very slight wear. Bad points,,, no top plate, top cover feed pawl & lever pin and extractor , and the bottom plate can be used but needs work soooo hence the price of $ 900 plus $20 for shipping. The missing parts are readily available from gun parts suppliers. Please contact me at ajmdreammg42 (at) yahoo (dot) com http://i251.photobucket.com/albums/gg288/ajmdreammg42/20160201_202700_zpsyi1kb2cf.jpg http://i251.photobucket.com/albums/gg288/ajmdreammg42/20160201_202711_zpsgrpi02hb.jpg http://i251.photobucket.com/albums/gg288/ajmdreammg42/20160127_163250_zpsmbujlom6.jpg