PTRS-14.5 Posted January 4, 2018 Report Share Posted January 4, 2018 (edited) TSMG #1 Aberdeen Proving Grounds Model T2 U.S. Manufacture Prototype. This is the actual SMG used for the testing in WW2! $100K TSMG #2 English BSA Mfg Sr# 2 TSMG in 45 Caliber. One of very few built and the only I have seen come to market in the last 15-20 years I know of … $ 90K I could reiterate all the history, etc. on these SMG here, but I’d just as well defer you all to the information on the MACHINE GUN BOARDS site at http://www.machinegunboards.com/forums/index.php?showforum=3 All the gents there have chewed on this for a few years… I will provide a full package of history and provenance with the SMG's I am a shooter rather than a collector and I have no desire to retain these guns. Thus they will go in a reasonable arrangement to others… That can be a trade Up or Down for other interesting C3, DD, Needed parts (MG81/MG81Z, Stoner 63A Right Hand Feed Set Up and Right hand feed Drum (real or the repro's out there), Complete AR10 Hollywood, Sudanese or Portuguese Parts, Early ( REAL) AR10’s, parts, optics, etc.) and original Military Sniper Rifles. I do have an current desire for a Pre Sample Ultimax 100 Mark 3 or 4, A clean ANM2 30 Cal C&R to finish my Bell Mount, AR18S MG's Sterling or Costa Mesa and a Pre Sample or Transferable DP/DPM. Any less common nice shooter grade MG's DD's are of interest! What do you have? These guns came within 15K of the reserve I had on each in a past auction (RIA). I am in no need of a rapid sale or deal on these. So please don't waste my time with low ball, ludicrous, offers. As I've only run this ad about a year ago, one can see I'm in no hurry... They can be inspected in my facility in Pgh, PA area by appointment. I have been in the Class 3 arena for over 25 years and have a long line of references. Email to FCLoganSPAM@FLOCOmaps.COM. Pls remove MAPS and SPAM from the EM address Thanks, Charlie Logan ARMS & ORDNANCE C3 Edited December 9, 2018 by PTRS-14.5 Compliance with Buddy & spelling Link to comment Share on other sites More sharing options...
PTRS-14.5 Posted December 8, 2018 Author Report Share Posted December 8, 2018 Bump after a year. Stoner 63/63A stuff is no longer needed unles you have a Right hand feed drum or an extra Right hand feed setup. Thx Charlie Link to comment Share on other sites More sharing options...
michaelkih Posted December 8, 2018 Report Share Posted December 8, 2018 Prices? Link to comment Share on other sites More sharing options...
Recommended Posts