Josey Wales

UZI.

I'm looking for one of the Glock style safety triggers for the Tokarev pistol, apparently they are most commonly found on Yugo Tokarev's. From what I can read online everyone is replacing these things after the guns have been imported, with the standard issue triggers. Theoretically that should mean there are a bunch of them sitting around that are not in a gun and that people have no further use for. Thanks, and Merry Christmas to all.

Forget that trick they used (to such good effect, it must be said) hunt yourself down a PP barrel.

I received the following this morning from a fellow AR15.com member. I'm bobofthedesert. bobofthedesert 10/19/2023 11:43:44 PM PDT Tornado Tech Hey! I saw your post in the thread about TT and wanted to share some info with you. I'm another person Mike fucked over, and he's become completely unreachable. There's a local private investigator who has stopped by his shop, and has gotten people's stuff back on their behalf. Here's his info: Mark Ososke Oregon Investigator # 33719 PI Services http://pi-info.com/ 503-643-4274 PO BOX 157, Beaverton, OR 97075 If you're looking to go the legal route, here's some other people to talk to: Detective Anthony Johnson, Hillsboro PD 503-615-6791, 503-793-4083 (cell) DA Jeff Lesowski 503-846-8671 BATFE regional Industry operations investigations, Michele Neilson 503-331-7830 He used to work at a local shop, and they may have a way to get ahold of him. They're absolutely not at fault for his actions, and hes since been fired, but when I talked to them they said they'd pass a message. MK Tactical, 503-746-4113 Hope this helps you get some resolution. END OF MESSAGE

Allegheny Arsenal has been suggested to me but I have no personal experience with them as of yet.

Not anything you care about getting back anyway, They've had a Walther PPK/S slide with PP barrel, and a Walther P1 slide and steel P38 barrel of mine for a couple years plus now, never answers the phone, never responds to emails. There are other such stories all over the net on other boards. It's too bad, they used to do good work and were the "Go To" guys for barrels threading but obviously those days are past. Now they just steal your shit. THIEVES! https://www.bbb.org/us/or/hillsboro/profile/gun-dealers/tornado-technologies-1296-90006823 Apparently they get negative reviews "closed", BBB shows 17 complaints closed in the last 12 months and 28 closed in the last 3 years. So they are still around, their website is still active, but they are just a black hole for your stuff, what goes in doesn't come back out.

Looking to buy one of the "Man Kave" PS90 hammers, also their extended mag release.

DO NOT SEND TO TORNADO TECH. THESE FUCKING THIEVES HAVE A WALTHER P1 SLIDE/P38 STEEL BARREL AND A WALTHER PPK SLIDE AND BARREL THEY HAVE STOLEN FROM ME, NO CONTACT, NO ANSWER TO PHONE CALLS OR EMAILS. THANKS FOR REMINDING ME I NEED TO FILE A POLICE REPORT WITH THEIR LOCAL SHERIFF'S OFFICE.

Sorry to hear the bullpup forum is dead, but hey, I have not been there in a good long while, so......

With respect, they don't sell for that kind of money anymore......here's two I sold in the last 90 days, with scopes, one of them a Zeiss. https://www.gunbroker.com/item/988601091 https://www.gunbroker.com/item/988755083

You need the Ratworx can designed specifically for the AUG. It can only be used with the 16" tube because it also comes with a replacement extended length gas system that dumps all that gas into a threaded hole off to the side in the back cap. Mine is hearing safe.

You'd be better off having your lawyer call ATF to arrange it's surrender without penalty. I don't know why reading comprehension is such an issue.

You may be thinking of a Baton Rouge Parish Sheriff's Office boat with a MK19 on it.

Appreciate the reply.

No.

When was the last time anyone saw one of these change hands, and what did it go for?

Offered here are the following P7 or P9S magazines. All are original H&K. Shipping is $10.40 USPS Flat Rate Small Box, for 1 or as many as fit in the box. No P9S 9mm or P7M13 available. P7 IB date code, blued exc. 3 available, $125 ea. IF date code, blued exc. 7 available, $125 ea. IH date code, blued NOS, 3 available, $140 ea. IA date code, blued exc.+ only 1 available, $125 IR date code, matte exc. only 1 available, $125 P7M8 No date code, black, NOS, 2 available $150 ea. P7M10 IR date code, black, NOS, only 1 available, $295 P7K3 9mmK, IG date code, blued NOS/Mint, only 1 available, $425 7.65mm, II date code, blued NOS/Mint, only 1 available, $595 .22LR, IG date code, blued NOS/Mint, only 1 available, $595 P9S .45 ACP Unknown date code as base has rubber Pachmayr pad professionally installed, exc.+ only 1 available, $175. IA date code, blued exc., only 1 available $175 IA date code, blued NOS/Mint, 4 available $195 ea. No need to ask for pics, the descriptions are accurate.

These scopes were made on contract for H&K by Hensoldt/Zeiss. They are not the same as the Bundeswehr contract G3 scopes. Here's a tutorial I wrote a while back....... "A word about fakes. There are a couple of ebay sellers based in Germany who have for years been selling BW surplus Z24 scopes that they have "tailored" to the American market, and they made a lot of money ripping people off. Here's how to tell what you're looking at. All of the BW surplus scopes are marked "Fero-Z24" at the rear of the tube. If it has this marking, it is a surplus scope and the BDC is set up for 7.62. The scopes that H&K ordered to be supplied with the 33E or the MP5/MP5k do not have this marking, only a 6 digit serial number. The 33E scopes are marked "0.5" beneath the serial number, MP5/MP5K scopes are marked "0.25". Surplus BW scopes have no similar marking underneath the serial number. The BW scopes are not originally marked for caliber and there is more than enough space on the ring to add ".223", which is what these two sellers did. Fake .223 turret rings have also been made. America does .223, not so much the rest of the world or foreign mil/LE buyers. A real 5.56 scope will be marked "5.56 NATO", not ".223". For the faked 9mm models the BDC markings of course could not be remotely similar, so they had new turret caps made to simulate the correct markings, but they marked them "9mm Nato". A real MP5/MP5k scope will be marked "9 NATO". A real MP5SD scope will be marked " 9 SD". Last of all, BW surplus scopes I have seen have flat head tapered screws to attach to the mount, real 33E and MP5/MP5K have dome head screws." **** This MP5/MP5K scope is the last one of the case I imported 6-7 years ago. There are no more over there to be imported. The SD scope was obtained from Australia. Payment by USPS M.O, Cashiers Check, or Zelle. 1) MP5/MP5K NOS $1595.00/shipped 2) MP5SD As new $1895.00/shipped 3) Sterling SMG magazines $40 plus shipping. Half the price of NIW, these surplus Sterling magazines have been disassembled, degreased, and the body and floor plate refinished with Automotive enamel. They look great! Slightly lubed and reassembled. H&K 21/23 series Machine Gun Parts, Factory NOS. Some are not available anywhere else. I have no other H&K 21/23 series parts. None. "Out of Stock" for this stuff is permanent, not something "Parts.net" can restock on. Last chance.....All prices plus shipping. H&K 23E Extractor $89.95 (9) Extractor/Pin/Spring set $149.95 (8) Firing Pin $159.95 (1) Firing Pin/Spring set $178.95 (1) H&K 21E Extractor Spring $49.95 (1) Extractor/Pin/Spring set $189.95 (2)

Looking for a used .mil hard case for the M2HB, they come in two varieties, receiver/1 barrel and receiver/2 barrels. I'll take either. Thanks!

Yeah, welcome to the cut throat world of Dutch AR-10 stuff. If it makes you feel any better, he didn't get top price for it, 1) Because HHollow never ever pays top price, ever and 2) I didn't know it was for sale. ;-) People think they are being clever selling stuff like this somewhere other than GB and not paying a %'age but the fact of the matter is, THAT is where you reach the widest audience and for something like a Dutch AR10 parts set, the seller probably got thousands less from the deal than he would have with more competition for it.

Thanks Buddy! Hope you've been well!

Folks, We've been around for a couple of years already, but it appears we are not as well known as we might have thought. Those of you who have been on HKPro for many years, as I was ("Lamont") may be aware of a certain level of ongoing dissatisfaction among the membership there. This long predated the sale of HKPro.com to a Canadian company, "Vertical Scope", but in our opinion didn't improve after that either. "Someone", in response to numerous complaints, stated that "if you don't like it, you can go start your own site". So we did. hkproshop.com is the result. If you are into H&K, or if you left HKPro long ago for reasons such as everyone else who has left did, please take a look at what we're doing, and please consider becoming a member. Hope to see you there!

Looking for one of the East German ZFK 4x scope/mount for the AK74. Just the scope and mount is fine if that's all you have although the complete set is preferred. Let me know if you want to trade on East German AK74 magazines new in the package or Russian 7N6 5.45x39 ammo. Thanks!

You might be better off to pay SGAmmo for some of the grade 2 stuff they are listing right now rather than coming on here and asking people to sell you primo ammo at below market prices, that they actually made the move on back then, because you lagged at the time.....the good stuff, no problems, on bandoleers/strippers in a sealed can goes for $1K these days... because everyone knows that for .30 Carbine this is the last real mil-spec, mil packaging ammo we are ever gonna see.

Looking for one of these. Condition/price please.