Age Verification

Thank you for your interest in Sturmgewehr.com  
Our site is for individuals at least 18 years old.

Jump to content

jl1577

Seaman
 View Profile  See their activity

  • Posts

    64

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by jl1577

  8. WTS: Transferable Military Armament Corporation Ingram M10/45 (MAC10) w/Lage Stock & Upper, Bowers VERS45 Suppressor, spare barrel, and 12x magazines - $15.5k OBO - SPF

    in NFA Market Board

    Posted · Edited by jl1577
    SPF

    Hey there everyone - I'm looking to sell a pretty good-sized package here which includes my M10/45 SMG w/spare barrel, Lage MAX-10/15 Upper w/2 barrel options, Lage Stock, Bowers can, and a total of 12 mags (3 unopened USGI surplus), 7 opened USGI surplus, and 2x Cobray-branded black powder-coated mags (pretty hard to find!). This is a packaged deal and I'd like to sell it all at once to someone instead of parting out. However, if someone wants JUST the M10, then I'll be open to selling everything else separately. The M10 and all accessories run flawlessly with zero issues.

    Please read: I have installed a 5" 300BLK barrel made by SLR Rifleworks on the Lage MAX-10/15 upper as you can see in the pictures, as I like to run it with subsonic 300BLK. I also have the factory 10.3" 5.56mm barrel, adjustable gas block, tube, and handguard as well (pictured above the upper). I am more than happy to switch this back to the standard 10.3" 5.56mm barrel for use and I will keep the 300BLK barrel for use in another AR build. If you wish for me to do this, I will subtract $300 from the price (which is the cost of the 300BLK barrel + handguard). The white block parts you see in the picture are for putting the MAX-10/15 in a vice to swap out the barrel so it's done properly with the correct amount of torque. These are made and sold by Lage Manf.

    Some additional notes:

    • The M10 has some upgrades such as the Lage safety, Lage dual-catch mag adapter (run factory Cobray mags and unmodified USGI GG mags), overmold grip, and thumb magazine release
    • I am happy to sell without the Bowers VERS45 can if you do not want it. We can work out pricing in PMs.
    • The spare barrel for the original upper already has a notch cut for the necessary pin (done by my gunsmith.
    • Also included are some extra small parts (magazine latch, 9mm mag adapter if you want to run a 9mm upper.
    • I have videos of this running in all configurations. I am happy to share those with potential buyers.

    The M10 is on a Form 4 in Virginia. I am an individual and the M10 is on my trust. This will transfer on a Form 4. 100% of funds due up-front. I have purchased multiple firearms from users on this forum, and also sold accessories to users on this forum. If you need references, please let me know.

    Everything in the pictures is included in the sale, including the optic & BUIS on the Lage Upper, along with the muzzle devices on the barrels. The 10.3" 5.56 barrel has a Dead Air Keymo Flashhider on it, and the 300BLK barrel has a Dead Air Xeno Flashhider on it. These two muzzle devices use two completely different mounting solutions, so if you do not want these muzzle devices, or just want one type (i.e. just the Keymo), please let me know and we can adjust.

    Pictures:

    spacer.png

    spacer.png

    spacer.png

    spacer.png

    spacer.png

    spacer.png

    spacer.png

    spacer.png

    spacer.png

  14. WTS. PS MAC 10/45, W/Max 10/15

    in NFA Market Board

    Posted

    13 hours ago, Double Tap Firearms said:

    Just looked at my Mac 10, the Lage 556 upper has some play in the front by the pin. I had talked to Lage before about some of these uppers and his answer to me was there were so many different lowers built with different uppers originally that some had metal inserts in the lower to strengthen up the original lower. So he had to design an upper that would fit almost any configuration. You might be able to slide some shims down in with the PIN or even some double-sided tape I've seen some guys put on some to help stiffen them up. Hope that helps. Thank you all for commenting

    Thank you so much for taking the time to look into this for me - I really appreciate it! I had actually thought about lowers with the metal tab inserts and how it may have been designed to work around those as well, so this makes a lot of sense. Just like you had mentioned, the wiggle is toward the from takedown pin, so it sounds exactly the same between our lowers and uppers. I'll definitely pick up some sort of washers or shims to see if I can minimize that play toward the front. 

    Thank you again and good luck with the sale! It's a fantastic combo and anyone who picks this up is in for a ton of fun.

  16. WTS: Transferable Colt machine gun - $27k

    in NFA Market Board

    Posted

    10 minutes ago, Thumpy said:

    Legally how is the bolt on a m16 the registered part? 

    This has happened a few times. The gun was registered incorrectly and the basic consensus here is that the bolt is married to the receiver, similar to how M16's with registered sears are married configurations. My assumption is that this is an SP1 or AR-15A2 that was converted - Colt would not register a bolt on a factory MG.

  18. HK MP5 A3 stock - refinished

    in Parts and Accessories Market Board

    Posted

    I'm looking to sell my MP5 A3 stock. Genuine HK with an IA date code. The stock originated from a Swiss Police MP5 parts kit, and I had it professionally refinished by the fine folks over at Zenith Firearms in Afton, VA. They disassembled the entire stock, cleaned, refinished, oiled up, and reassembled the stock.

    It has a little bit of use on it from the range, as well as some scratches on the left side from use. Overall it's still in 95%+ condition and works great. Lockup is super tight with zero wobble. I'm asking $950 OBO for the stock.

    Pictures can be found at the following link: https://imgur.com/a/4jB2rT4

    Please message me with any questions, thanks!

  19. SOLD: Lage MAX-10/45 mk2 Upper Receiver w/Extra Bolt, VFG, Barrel Upgrade, BUIS, & JMac Brake - $1,200

    in Parts and Accessories Market Board

    Posted · Edited by jl1577
    SOLD

    I'm looking to sell my Lage MAX-10/45 MK2 upper ($985) for the M10 SMG. This package comes with a complete extra bolt assembly ($245 extra from Lage), the barrel upgrade from Lage for 5/8x24 threads ($20 upgrade), a JMac RRD-2C 30S muzzle brake that is Keymo compatible for a suppressor ($105), a Lage VFG ($50), and B&T BUIS. Probably around 700 rounds or less through the upper.

    Total cost of the package new would be $1425. I am asking for $1,200 shipped anywhere in the CONUS. If you would like to purchase the package without the spare bolt assembly, that's fine and I'll knock $200 off the price. Please PM me with any questions.

    Edit: Forgot to add photos.

    spacer.png

    spacer.png

    xOMOE2S.jpg

  21. WTS/WTT: Transferable IMI Uzi Model A - Registered Receiver - Sold

    in NFA Market Board

    Posted · Edited by jl1577
    Edit cash price

    Update - Willing to sell for cash price as well. Asking $19k $18.5k for Uzi + 2 parts kits + barrels + ~20 magazines.

    Just poking my head out here to see what kind of interesting offers I can get for a transferable IMI Uzi Model A with a registered receiver. This is a partially-converted firearm, but the most important part of the conversion (the blocking bar being removed) has been done. This was converted by Phoenix Arms in Houston, TX. Here are the conversion details:

    Done:

    • Blocking bar removed
    • Trigger pack modified to allow 3rd-position (FA)

    Not done:

    • Barrel restrictor ring still in place (only accepts clearanced bolts and semi-auto barrels)
    • Trunnion has not been milled to accept FA barrel (this goes hand-in-hand with the restrictor ring)
    • Sear pad holes have not been lengthened
    • Trigger pack takedown pin hole has not been resized (is 9mm instead of 8mm for surplus packs)

    Included with this ad would be about 20 Uzi mags (mix of 25rd and 32rd), a few barrels, and 2 surplus Uzi parts kits with some odds/ends missing. I am an individual and this would transfer from a Form 4.

    Some pictures below with an FBI-length barrel installed:

    spacer.png

    spacer.png

  25. HK SP5K Pair NIB Reduced

    in Semi-Auto Market Board

    Posted

    On 4/15/2022 at 4:54 PM, Gmoon said:

    there are not marked with any of the US warning's like all the current units.. they are about 10 years old and UN-fired  I would expect no warranty.. .

    I'm confused - didn't the SP5 nomenclature only come about in 2019? At most they could only be 3 years old. If they do not have the US warnings, then my assumption is simply that these are Euro imports. Can you confirm?

×
×
  • Create New...