Age Verification
Thank you for your interest in Sturmgewehr.com
Our site is for individuals at least 18 years old.
Thank you for your interest in Sturmgewehr.com
Our site is for individuals at least 18 years old.
We now have the only 80% lower in the country that clones the M16A1 profile. Made out of 7075-T6 aluminum and because of the contouring they are taking a total of 3 hours to machine out for each one.
We can do deep laser engraving for an additional $50 per lower.
This lower is the proper receiver for the following reproduction builds:
M16A1
Model 619
Model 629
Model 630 / GAU-5A
Model 639
Model 649 / GAU-5A/A
Model 651/652
Model 653/654
Mk 18 Mod 0
Mk 12
We are the only ones in the country with this lower receiver design. This auction is ONLY for the RECEIVER, not the upper. Shown pictures is a demonstration of fit with BINARY from a customer CLASS 2 Type 7 with SOT shop.
Forged by CERRO & Machined by Cryostructure / Black Widow Arms, this is a FULL 100% machined lower
The goal of this lower was to reduce the size of distance between the receiver and the 100,150,200 round M249/MK46 “NUTSACK”. With a tighter rifle build by pulling up the ammo pouch tighter up to the barrel and allows a much better way of with the prone position with a bipod. Made from 7075-T6 heat-treated aluminum with CERRO forging. Slab side cuts make it a thin as possible profile and with an ambidextrous bolt release for perfect use with the MCR® DUAL-FEED™ UPPER M-LOK® COMPACT (MCR-556-DFRMS) or ARES SHRIKE belt-fed uppers.
Can't ship where dis-allowed, please e-mail if you believe you might have issues.
$200.00 with $8.95 Shipping:
RETURNS:
30 Days from receipt, 100% refund for any reason with FREE RETURN SHIPPING, we have a lifetime warranty on everything we sell for replacements
So we have a less expensive alternative for the official aluminum MCR® adapter. $145.99 is the price of the standard adapter, ours is only $35. So that is over $110 savings. A much better price for an item that at times can get easily lost.
Our magazine adapter plugs directly into the standard magazine well of AR15/M16/M4. Then with the adapter in place it allows the mounting of linked ammo containers directly to the rifle.
https://www.cryostructure.com/product/mcr-magazine-adapter/
So we have a new 3rd hole jig that works on BOTH sides of the lower. Past ones only worked on one side which could cause problems and you would need a drill press to accurately guide the pin & it was the only complaint with that past with this type of jig . With ours you just need a standard hand drill to drill both sides. This is a brand new design that has never been made before. Hardened drill bushings for a lifetime of accurate surface. Aluminum with hardened pressed fit steel bushings and pins.
Just contact us, but we will have you send us a copy of your FFL & SOT. We will only ship to the addresses on the FFL& SOT license.
$50 each with $8.95 flat shipping. https://www.cryostructure.com/product/sot-micro-jigs/
This mil-spec trunnion block and barrel support for the M249, M249S, MK46 and MK48-MOD 0 that we manufacture.
The barrel & gas tube fit is precise with perfect ejection port door pin hole is perfectly placed.
This part is made out of 4140PH steel and has been heat treated for hardness.
We offer a lifetime guarantee on this part and guarantee its fitment and performance.
https://www.cryostructure.com/product/m249-mk46-mk48-mod-0-trunnion/
$275 each
Are they in somewhat high demand?
I was looking for manufacture precision bullets using a screw machine for the US market at the best value price for the precision. I was wondering at what prices and quantity that people would be looking for?
I can probably beat the prices on all solids for the same materials in the country, if I had a good baseline product.
I'm looking for advice on what to make and if anyone would be interested at certain price levels.
Thanks ~ Paul
So the the FlightLite - MCR upper needs an adapter to use the nutsack with the upper, this magazine adapter is $149. With our 80% lower package, you can get both a full 80% receiver & a FREE 200 round USED porkchop ammo box for only $125. A TOTAL ABSOLUTE AMAZING VALUE!!! Last batch for the year.
Purchase Link: (CAN ONLY SHIP TO STATES THAT THEY ARE ALLOWED)
Forged by CERRO & Machined by Cryostructure, this 80 percent lower is not an FFL item and is classified by the ATF as a non-firearm.
The goal of this lower was to reduce the size of distance between the receiver and the 100,150,200 round M249/MK46 “NUTSACK”. The beauty is that on the 80% lower is that it is cheaper than even the standard MCR adapter of $149 and have a better fitment. With a tighter rifle build by pulling up the ammo pouch tighter up to the barrel and allows a much better way of with the prone position with a bipod. Made from 7075-T6 heat-treated aluminum with CERRO forging. Slab side cuts make it a thin as possible profile and with a ambidextrous bolt release for perfect use with the MCR® DUAL-FEED™ UPPER M-LOK® COMPACT (MCR-556-DFRMS) or ARES SHRIKE belt-fed uppers.
Shown below a customer’s gorgeous build with our 100% lower, but you can see how it really pulls the feed bag tight into the rifle.
$50 Micro-Jig 3rd hole jig - ONLY WILL SELL TO FFL-SOT license holders
in NFA Market Board
Posted
We have a new 3rd hole jig that works on BOTH sides of the lower. Past ones only worked on one side which could cause problems and you would need a drill press to accurately guide the pin & it was the only complaint with that past with this type of jig. With ours you just need a standard hand drill to drill both sides. This is a new design that we have feedback from. Hardened drill bushings for a lifetime of accurate surface. Aluminum with hardened pressed fit steel bushings and pins.
Just contact us, but we will have you send us a copy of your FFL & SOT. We will only ship to the addresses on the FFL& SOT license, but you can have more than one jig.
$50 each with $8.95 flat shipping. https://www.cryostructure.com/product/sot-micro-jigs/