Parakeet Shop Posted August 26, 2017 Report Share Posted August 26, 2017 Looking for Schwarzlose 07 ,07/12 belt fed parts and accessories . 7.62 X 54R conversion ,bolt, parts kit,tools or loader,...whatever you have Quote Link to comment Share on other sites More sharing options...
pstidan Posted August 26, 2017 Report Share Posted August 26, 2017 Did you contact Dolf Goldsmith? He was may be able to help you. Quote Link to comment Share on other sites More sharing options...
Parakeet Shop Posted August 26, 2017 Author Report Share Posted August 26, 2017 That's a great idea, do you have current contact information you could PM me? Quote Link to comment Share on other sites More sharing options...
pstidan Posted August 26, 2017 Report Share Posted August 26, 2017 40 minutes ago, Parakeet Shop said: That's a great idea, do you have current contact information you could PM me? Check your messages. Quote Link to comment Share on other sites More sharing options...
BRMCII Posted August 29, 2017 Report Share Posted August 29, 2017 I sold Dolf an 8x50r 07/12 some years ago. He still has one, a different one than the one I sold him, but he doesn't have any 8x50r parts. 54r conversion consists entirely of a 54r barrel. The 8x50r bolt face, cartridge extraction, and most importantly the integral feedlips in the bottom of the receiver will work with the 54r. Dolf might have some 7.92 parts, but the the 8x50r feedlips in the receiver will not work with the 7.92 round without being reconfigured to fit and function with it. There is only one (1) belt loader in the US for the 8x50r round for use in the fabric belts which I own. The 07/12 7.92 loaders in the US will not work with 8x50r or with fabric belts but were set up to load the 100 round steel continuous belts that came in with the 7.92 07/12 kits. Although hese 7.92 loaders appear identical to the 8x50r fabric belts loaders, they have been significantly reconfigured to load the 7.92 round and steel belts. IMA had small parts bags for the 7.92 07/12 kits that they imported. Otherwise there are no accessories for the 07/12s available here. Odds and ends do come into the country now and then such as field repair kits, of which three were imported and sold recently. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Parakeet Shop Posted August 29, 2017 Author Report Share Posted August 29, 2017 Thanks Bubba for the information, as always highly highly informative! Seriously I don't know anyone in the world with more real time hands on experience..... I was trying to shake the tree and see what fell out.what I NEED is the cone thingee (coneous flash hiderious)on the front and the curved thingee (curious buttstockious) on the back. If read my Latin correctly. Quote Link to comment Share on other sites More sharing options...
BRMCII Posted August 30, 2017 Report Share Posted August 30, 2017 Might be a flash-hider or a detachable buttstock in the woodwork. Put some WTBs on the MG sites. Quote Link to comment Share on other sites More sharing options...
Parakeet Shop Posted August 30, 2017 Author Report Share Posted August 30, 2017 (edited) Good idea! Maybe i can beg them off a dummy gun for a hefty sum!! I grabbed a 7.62x 54 R round and it's a few thousands large in the 8x50 Freak Rimmed bolt face!? Am I missing something? What about a conversion to 8 X 56 freak rimmed? What would that entail? On the net they say 8x56 R has a much larger bullet diameter (.327) which I don't believe(or hope it's not). They also say the original 8 X 50 R round is .317 (El wrongo) Speaking of bolt faces, have you ever had a slam fired with modern shaped primers(the 1935 8 X 50 R round has a large radius on the primer cup in the shape of the projection ) because the the .200 by .013 projection on the bolt face? And what is the projection for specifically? I could hazard a guess but I would be probably wrong. Can you think of ANY other gun that uses that projection,,,, the Schwarzlose is incredibly fascinating in design and execution!! Edited August 30, 2017 by Parakeet Shop I'm illiterate and don't poofread done good Quote Link to comment Share on other sites More sharing options...
GUNHEEP Posted September 8, 2017 Report Share Posted September 8, 2017 Dean i have a mint tripod with ALL the little missing pins & chains that go with it let me know either way if you are interested Andy 440-525-4689 Quote Link to comment Share on other sites More sharing options...
BRMCII Posted September 8, 2017 Report Share Posted September 8, 2017 >Maybe i can beg them off a dummy gun for a hefty sum!! I grabbed a 7.62x 54 R round and it's a few thousands large in the 8x50 Freak Rimmed bolt face!? Am I missing something?< Yes, so open up the bolt face enough to fit the rim....... What about a conversion to 8 X 56 freak rimmed? What would that entail? On the net they say 8x56 R has a much larger bullet diameter (.327) which I don't believe(or hope it's not). They also say the original 8 X 50 R round is .317 (El wrongo) 8x56r is easier to find than 8x50r. Just go to 54r. Speaking of bolt faces, have you ever had a slam fired with modern shaped primers(the 1935 8 X 50 R round has a large radius on the primer cup in the shape of the projection ) because the the .200 by .013 projection on the bolt face? And what is the projection for specifically? I could hazard a guess but I would be probably wrong. Can you think of ANY other gun that uses that projection, the Schwarzlose is incredibly fascinating in design and execution!! Never had a slam fire in an 07/12 due to the primer rim. Seems to me that the rim is there to prevent the primer from blowing out since the action opens when pressures are still a bit high. I have a couple 8x50r bolts that had the boltface welded so cleaned the weld off which removed the primer rim and use one of those for 54r. 1 Quote Link to comment Share on other sites More sharing options...
mike todd Posted September 12, 2017 Report Share Posted September 12, 2017 SEE DEANO ? TOLD YA BUBBA ALWAYS HAS A GOOD ANSWER ! now if we could just talk him into sharing a drawing or an example of my much desired portive barrel wrench (sigh) Quote Link to comment Share on other sites More sharing options...
Midwest Metal Creations LL Posted September 12, 2017 Report Share Posted September 12, 2017 I may be able to help you on the flash hider, do you need the muzzle gland as well, the part that mounts between the hider and the jacket? Let me check my parts bins and make sure I have an extra. Quote Link to comment Share on other sites More sharing options...
Parakeet Shop Posted September 12, 2017 Author Report Share Posted September 12, 2017 Hello, that would be awesome! I believe I have the correct muzzle gland,mine has round spanner holes in the face. That would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Parakeet Shop Posted January 13, 2018 Author Report Share Posted January 13, 2018 Still looking for the buttstock Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.