Jump to content

WTS Daewoo Rifle Parts


Recommended Posts

I have acquired the inventory of the now defunct Daewoorifleparts.com. This is likely the only cache of Daewoo parts in the county other than a few 922 R parts by various companies.  I am attempting to sell this as one lot to an entity that would like to continue to sell these parts and possibly even manufacture parts in the future.  I am not a dealer, just a Daewoo collector who did not want to see this stuff disappear into a dusty basement somewhere. I acquired this lot of parts with the sole purpose of finding a buyer that has the resources to sell them. The domain name could be transferred to the buyer if they wanted it. I do not have the time to sell this stuff individually. Below is a complete listing of the inventory. In parenthesis behind each line item is the estimated retail cost.  There are several receivers that would have to go to an FFL. I am not an FFL but the receivers are personally owned. The whole lot of parts is quite heavy probably 100 plus pounds. i can arrange shipping at the buyers expense. Local pickup in the Phoenix AZ Area is possible as is inspection by appointment.  Feel free to ask questions.  Cost for the entire inventory is $11,000.00 We are open to reasonable offers. Total Value is estimated at over 25K. At this time we are not selling any individual parts. Please do not ask about individual parts. This sale if for the entire inventory at one time for one money.

Daewoo Rifle Parts INVENTORY as of 7/12/17

Parts list broken down into parts specific to types, and parts common to all types.
Parts marked with (*) are easily replaced by bulk purchased AR15 parts. Mostly springs.
Parts in BOLD are impossible to find or high demand/high dollar value per part items.

DR200/300
DR200/300 aftermarket stock, Lage mfg, plastic, 6” US made for 922r, 2 (130)
DR200/300 aftermarket flash hider, CNC Warrior mfg, New, parked, US made for 922r, 1 (65)
Gas piston types. Piston, New, CNC Warrior, US made for 922r or replace broken pre-89 gun, Stainless 11 (550)
DR200/300 Thumbhole stocks. 9 (225)
DR200/300 Thumbhole stock, green 1 with matching handguards (50)
DR200/300 only, inverted safety, used, 21 (420)
DR200, barrel, used, stripped, w/o extension 1 (100)
DR200/300 ring, buffer, used, 6 (180)
DR200/300 spring, buffer, used, 6 (60)
DR300 (7.62x39mm) ONLY, extractor with spg 1 (100)
DR300 only, barrel assembly w/extension, used 2 (300)
DR300 ONLY, recoil spring assembly, used 1 (150)
DR200/300 safety plunger retaining set screw, 11 (44)
DR200/300 safety plunger (short) 10 (100)
DR200/300 safety spring (short) 10 (40)
DR200/300 receiver, stripped. 4 (600)
(3114)

PARTS FOR PRE-89 guns. Gas piston and DI types.
ALL PRE-89 types, bolt, pistol grip 7* (70)
ALL PRE-89 types, plunger, safety 14* (70)
ALL PRE-89 types, spring, safety plunger 17* (85)
ALL Pre-89 types, pistol grip, new, Korean 3 (195)
ALLPre-89 type, spring, buffer, used, 4 (40)
ALL Pre-89 type, ring, buffer, 5 (50)
PRE-89 guns gas piston only.
Gas piston type, Pre-89, screw, buttplate attaching, 1 (5)
Pre-89 K2, spring, stock folding knuckle 1 (10)
(525)

PARTS COMMON TO ALL RIFLE TYPES
ALL TYPES Front sling swivel 4 (40)
ALL TYPES Front sling swivel rivet 2 (10)
ALL TYPES magazine catch 15 (375)
ALL TYPES magazine release button (some with retaining pin) 9 (180)
ALL TYPES spring, magazine release 16 (80)
ALL TYPES spring, disconnector 200* (800)
ALL TYPES screw, handguard 8 (80)
ALL TYPES Roll pin, ejector housing 1” 33 (120)
ALL TYPES, front swivel band 6 (60)
ALL TYPES, pin, extractor axle, used 3* (15)
ALL TYPES, pin, firing pin retainer 9* (90)
ALL TYPES, sleeve, ejector blade housing, 7 (175)
ALL TYPES. Spring, ejector or front pivot pin 20* (200)
ALL TYPES Spring, extractor, 25* (200)
ALL TYPES, buffer, extractor spring insert, blue 20* (80)
ALL TYPES, pin, front pivot 9* (90)
ALL TYPES, plunger, front pivot pin 10* (50)
ALL TYPES, spring, trigger return 30* (300)
ALL TYPES, ejector blade 14 (420)
ALL TYPES, pin, extractor axle, new 30* (240)
ALL TYPES, plunger, bolt catch, 25* (125)
ALL TYPES, roll pin, gas piston or buffer retainer 5 (25)
ALL TYPES. Spring, rear sight windage wheel plunger 5* (25)
ALL TYPES. Roll pin, TINY, for windage wheel 10* (30)
ALL TYPES, plunger, windage wheel 4* (20)
ALL TYPES, trigger guard assy, used takeoffs 12 (240)
ALL TYPES, spring, hammer, new 23* (100)
ALL TYPES, disconnector, used 5 (125)
ALL TYPES, hammer, used, reparked 3 (75)
ALL TYPES, trigger, used, some reparked 16 (400)
ALL TYPES, washer, split, handguard screw, new, Korean 7 (35)
ALL TYPES, pin, tapered, front sight block, new, Korean 5* (25)
-----ZERO pre-89 imported DI guns have these parts, however our NEW Korean recoil sets have them. Very early Gas piston guns do not have the “flip lock” on the recoil set either---
ALL TYPES, recoil spring flip lock lever, used, 1 (10)
ALL TYPES, recoil spring flip lock lever plunger, used 1 (10)
(4850)

Parts for Gas tube DI guns only, K1, AR100c, Max I
Gas TUBE type, bolt, stripped, new Korean 12 (2800)
Gas tube type, rear sight, takeoff, parkerized 1 (25)
Gas tube type, firing pin, CNC Warrior, Sts, New, 3 (120)
Gas tube type, firing pin, Korean, chromed, new 11 (440)
Gas tube type, pin, camming, new Korean, 6 (210)
Gas tube type, lever, bolt catch, reparked 3 (120)
Gas tube type, spring, front sight adjusting 4* (20)
Gas tube type, plunger, front sight adjusting 4* (20)
Gas tube type, front sight post, 3 (15)
Gas tube type, rear sight windage screw, 3 (30)
Gas tube type, McFarland 1 piece gas ring, new 8 (80)
Gas tube type, std gas rings, 24* (75)
Gas tube type, barrel, used, stripped, no extension 1 (100)
Gas tube types, recoil spring set, w/lock, new Korean 25 (4375)
Gas tube type, handguards, new pair w/screw 1 (65)
Gas tube type, upper receiver, stripped, new, Korean 1 (250)
Gas tube type, sliding buttstock, new, Korean, 4 (700)
Gas tube type, extractors. New, US, 5* (100)
(9445)

Parts for Gas piston guns only.
Gas piston types, charging handle, new, Korean, 5 (260)
Gas piston type, spring, recoil, new, Korean 44 (1980)
Gas piston types, gas piston op rod, new, Korean 9 (450)
Gas piston types, gasplug, custom gunsmith made, 1 (n/a)
Gas piston types, Piston, Korean, chromed, takeoffs 4 (200)
Gas piston types. Nut, jam type, for flash hider, new, parkerized 11 (110)
Gas piston type, firing pin, takeoff, chromed 1 (40)
Gas piston type, pin, camming, new, Korean 8 (315)
Gas piston type, pin, camming, used, Korean 9 (225)
Gas piston type, EARLY, pin, camming, relief cut, used 1 (50)
Gas piston type, handguards, new, pair w/screw 1 (65)
Gas piston type, handguards, used, pair 3 (180)
Gas piston type, gas tube, new, Korean 4 (200)
Gas piston type, bolt catch lever, used 9 (225)
Gas piston type, rear sight blade, used, 7 (175)
Gas piston type (DR200 marked) knob, elevation, used, 5 (125)
Gas piston type, windage wheel, used, 9 (175)
Gas piston type, ring, gas tube spacer, new 11 (110)
Gas piston type, windage screw, used, 11 (220)
Gas piston type, elevation castle bolt, used, 11 (220)
Gas piston type, rear sight W spring, used, 11 (220)
Gas piston type, rear sight elevation screw, used 10 (100)
Gas piston type, pin, barrel fixing, new, Korean 8 (120)
Gas piston type, screw, scope mount filler, used, 3 (30)
Gas piston type, clip, gas plug release plunger, replacement 20 (100)
Gas piston type, washer, windage wheel spacer, used 5 (25)
(5920)

Custom parts
Gas piston type, long optics rail, AZEX mfg. New, 2 (140)
Gas piston types, Piston, New, CNC Warrior, Sts, SHORT for Contractor 12” upper conversions 28 (1400)
Gas piston types. DRP, 3d printed oversized charging handles, Shapeways mfg. 922r compliant, 12 (1020)
K3 belt-fed machinegun, optics rail, bolt on, custom, new, AZEX mfg. 3 (300)
Gas piston types, gas plug, extended, new, CNC Warrior mfg. 18 (1530)
Gas piston types, gas plug, standard replacement, CNC Warrior mfg. 2 (130)
Gas piston types, flash hider, New, parkerized, 922r compliant, CNC Warrior mfg. with jam nut. 1 (65)
ALL types, 90 degree throw reversible safety lever. Aluminum, Stormwerkz mfg. 1 (65)

 

18493434_438450623169171_1105944986_o.jpg

Edited by h8pvmnt
Added note about the purpose of the sale
Link to comment
Share on other sites

  • 1 month later...

I have update this post to re-iterate that we are trying to sell the entire inventory to someone who has the resources to market this stuff correctly. At this time we are not selling any individual parts. If that changes we will update the information.

Link to comment
Share on other sites

  • 10 months later...

Wow! That was a quick response, thank you. The parts I need are:

Recoil Spring Assembly (full)

Charging handle (oversized)

Pistol Grip  (preferably original style, but would be happy with any)

Stock (Lage, preferably 8.5”. Open to any size if selection is limited)

Stock Adapter

Flash Hider

Of course all 922r compliant versions if available. Ultimately I’d also like a scope rail and may need another internal part or two just for compliance depending on what you have. Thanks again, I appreciate anything you can do.

 

 

 

 

 

  • Like 1
Link to comment
Share on other sites

Pistol grips for the DR 200 are difficult to find, there is a person that sells on GB that has them from time to time. Search the other boards. I do not have any for sale. a pre-ban pistol grip will not work on the DR200, you can modify an AR pistol grip to work.

The Lage stock you can get directly from Lage, google his website.

The Stock adapter, hinge and scope mount are available from www.stormwerks.com

The charging handle is available from cncwarrior.com if they have any in stock.

If you find the rest of the stuff get send me an email and i will see if i have an extra recoil set in my personal stuff. 

We still are not selling the DRP inventory at this time.

Link to comment
Share on other sites

Looks like I can get just about everything but the grip (I’ll try the AR grip solution), the charging handle (I’ll keep an eye on cncmachine.com for a new run), the flash hider (which was mainly to fix a stupid thing-and to count as a 922r part), and the recoil spring assembly. The spring assembly will be the real problem I think, I’ve been looking unsuccessfully for a while. Unfortunately my rifle was in pieces when I moved and the box containing my stock, handle, and spring assembly was lost (along with a bunch of mags and around a thousand rounds of ammo). I can make do on everything else but it just won’t run without that spring assembly. I have a really cool, very expensive paper-weight now. 

Thank you for the information and the time you’ve taken to help me out.

Link to comment
Share on other sites

The Barrel is threaded 1/2-28 but the fake flash hider is brazed on so you will need heat to get it off. The threads are longer than an AR-15 so you will either need to use a thick spacer/jamb nut or have the barrel shortened. That would be something to deal with after your done, remember a us mag counts as 3 922r parts, add an AR HTS and the stock and pistol grip your way over the parts count.  Like i said when you get down to just the recoil set send me an email, the address is in the original post. I will see what i can do about that. Hate to see a DR200 sitting there.

Link to comment
Share on other sites

  • 5 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 5 weeks later...

I'm looking for front sight posts/gas blocks for the Max-1 and AR-100. The corrosion was not my doing, I received them like this. All the other stuff is just on the surface. Alternatively, I'm looking for info from a 'woo expert and ways about fixing these.

Thanks

Xex4d69l.jpg

QSHD04rl.jpg

C7p0XMnl.jpg

Link to comment
Share on other sites

  • 1 month later...
  • 5 weeks later...
  • 2 months later...

OP, I am looking for a rear sling swivel/ mount thingymabob for my K1a1 that goes into the receiver (current hole looks like a QD point sans the QD. Do you have suggestions for where I can find this part. I appreciate your post, but it appears after 2 years no one has stepped up to the plate. It would probably benefit you greatly to take 1 photo of each part and put the quantity of those parts with that 1 photo on each listing up on Gunbroker as it would get rid of it all and help everyone desperately looking for one single part. You make money, we get parts. I appreciate a busy schedule as I am myself, this is a suggestion obviously. Also, would I be able to prod you for that said receiver sling swivel thingymabob? Please?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...