ginwv Posted December 5, 2016 Report Share Posted December 5, 2016 * Brand New in the Box MAC 10/9mm, marked INGRAM M10A1, they are 9mm. These are Texas MAC's that were purchased at auction by SWD (same people who made the M11/9's) as unfinished receivers. SWD then completed these guns & properly TIG welded them together (unlike the Texas built guns that were only spot welded & have been know to come apart). These are great shooters as they do run slower that the M10 45's, M11 9's & M11/380's These guns are registered in 9mm & 45 ACP but are set up in 9mm. These guns come w/ all the factory accessories as pictured metal mags can be purchased from Jerry Prasser @ Recon Ord, $6995.00 http://www.dndguns.com/images/mac10-9.jpg * FN FNC-K, custom cut down FNC Paratrooper, comes as pictured w/ folding stock & MP5K K-grip. Gun runs good on PMC ammo. You cannot run a suppressor on this gun as it creates too much back pressure & breaks the hammer, call for details, priced accordingly $12,995.00 http://www.dndguns.com/fn-fnck.htm*Tippman 1919, Here a great little item that any 22lr or miniature collector would love to have. This is a 1/2 scale minature of the Browning 1919 machinegun. This gun was manufactured by Tippmann Arms Company back in the 80's it comes as pictured w/ hardwood transit case, 2 - 1/2 scale metal ammo cans, 1/2 scale tri-pod, pintle & T&E. It even has a miniature manual. gun is in beautiful condition, click on the pictures below for a closer look. These are getting VERY HARD to find now-a-days. If you have any questions let me know. $22,500.00 http://www.dndguns.com/tippman_1919.htm*Colt M16-A1 set up in 9mm w/ all Colt parts from a post sample Colt SMG (except for Hahn Machine mag block. Gun runs perfect & is in nice shape. Comes as pictured w/ Magpul stock & 1 factory Colt mag. $27,995.00 http://www.dndguns.com/colt_m16_9mm.htm Note deduct $1000.00 from price if you dont want the 9mm parts, just the complete Colt M16A1 223 lower* Colt M16-A2, “BURST” marked, excellent original condition, $30,995.00 , http://www.dndguns.com/colt_m16a2.htm * Wilson Arms Company AR15 / M16 DIAS (drop in auto sear) These are getting very hard to find now-a-days. These will make any of your AR15's select fire. This is one of the best made due toit's steel construction. $32,500 http://www.dndguns.com/ar15_dias.htmGeorge Denkins / D&D Guns304-562-7699www.dndguns.com Quote Link to comment Share on other sites More sharing options...
wcbrowning Posted December 7, 2016 Report Share Posted December 7, 2016 On Monday, December 05, 2016 at 8:35 PM, ginwv said: * Brand New in the Box MAC 10/9mm, marked INGRAM M10A1, they are 9mm. These are Texas MAC's that were purchased at auction by SWD (same people who made the M11/9's) as unfinished receivers. SWD then completed these guns & properly TIG welded them together (unlike the Texas built guns that were only spot welded & have been know to come apart). These are great shooters as they do run slower that the M10 45's, M11 9's & M11/380's These guns are registered in 9mm & 45 ACP but are set up in 9mm. These guns come w/ all the factory accessories as pictured metal mags can be purchased from Jerry Prasser @ Recon Ord, $6995.00 http://www.dndguns.com/images/mac10-9.jpg * FN FNC-K, custom cut down FNC Paratrooper, comes as pictured w/ folding stock & MP5K K-grip. Gun runs good on PMC ammo. You cannot run a suppressor on this gun as it creates too much back pressure & breaks the hammer, call for details, priced accordingly $12,995.00 http://www.dndguns.com/fn-fnck.htm*Tippman 1919, Here a great little item that any 22lr or miniature collector would love to have. This is a 1/2 scale minature of the Browning 1919 machinegun. This gun was manufactured by Tippmann Arms Company back in the 80's it comes as pictured w/ hardwood transit case, 2 - 1/2 scale metal ammo cans, 1/2 scale tri-pod, pintle & T&E. It even has a miniature manual. gun is in beautiful condition, click on the pictures below for a closer look. These are getting VERY HARD to find now-a-days. If you have any questions let me know. $22,500.00 http://www.dndguns.com/tippman_1919.htm*Colt M16-A1 set up in 9mm w/ all Colt parts from a post sample Colt SMG (except for Hahn Machine mag block. Gun runs perfect & is in nice shape. Comes as pictured w/ Magpul stock & 1 factory Colt mag. $27,995.00 http://www.dndguns.com/colt_m16_9mm.htm Note deduct $1000.00 from price if you dont want the 9mm parts, just the complete Colt M16A1 223 lower* Colt M16-A2, “BURST” marked, excellent original condition, $30,995.00 , http://www.dndguns.com/colt_m16a2.htm * Wilson Arms Company AR15 / M16 DIAS (drop in auto sear) These are getting very hard to find now-a-days. These will make any of your AR15's select fire. This is one of the best made due toit's steel construction. $32,500 http://www.dndguns.com/ar15_dias.htmGeorge Denkins / D&D Guns304-562-7699www.dndguns.com PM sent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.