Transferable M60E6 Machine Gun SOLD

[AnchorTactical]

SOLD
 

For sale I have an M60E6 belt fed fully transferable machine gun with a 2026 U.S. Ordnance E6. This M60 was inspected and function tested by Aaron Demko at BeltFeds.Com. He measured the tolerances of the trunion to confirm that they are within spec, mil’ed out some of the E6 hand guard and bipod mount so they fit around the aftermarket gas tube and then function tested it. He also did a thorough inspection of all components and did a grading video on its condition and quality of build. 

The M60 started its life in the original E1 configuration and was manufactured pre 1976 by Central KY Arms out of Cynthiana, KY. The conversion involves:

— Military issue Saco Lowell Shops M60 trunion that was de-mil’ed and then repurposed by the original manufacturer 

*** One of the ears of the trunion was welded back on  see photo # for more clarity 

— Saco Bridge

— Saco T&E plate 

— Rock Island rails and channel that were riveted together  (appear to be)

— Rock island type gas tube that was welded on 

This M60 was in the same collection since the 1970’s and the original E1 kit on was in great shape. We did through inspection on the receiver and everything came back within spec. We then deep cleaned the receiver 5 times in an ultrasonic bath, soaked it in water and then baked it at 100 degrees in our oven. After this we installed the M60E6 kit. We then took it on the range and ran 20 rounds of belted .308 on it. It performed flawlessly. It is on form 3 and ready for immediate transfer to the buyers FFL/SOT. Please message with any questions that you have. 
 

We also have a 1950’s curio & relic M60E4 Mod 1 (also known as MK43 Mod 1) Saco Shops trunion registered gun that is on form 3. 

Edited March 23 by AnchorTactical
SOLD