Jump to content

#17 36 degree Locking Device availability is strange


Joker19

Recommended Posts

I am the type of person that will spend time searching the entire globe for items and have found many in some very strange places, BUT.  My latest search started about a month ago for a #17 36 degree  locking device for an HK91 and what I found is absolutely crazy.  Come to find out it is one of the most sought after devices there is, yet those that manufacture these aftermarket seem to not care and therefore are not making them.  The other device angles (most that are never ordered) are made by the thousands.  The world wide hunt for these are not done by just me, there are hundreds looking for these and one I have seen paying $399 for one on gun broker which is outrages to say the least.  I found two in Europe (Germany and GB) going for about the same, they are originals but come on, used and function "not guaranteed!"   I have sent many emails to some manufacturers and have only received a response from one in the US and one in Germany with the same answer "we don't know when or if will will produce these items."  I wonder why?

Link to comment
Share on other sites

Honestly, and no offense intended, but the HK91 is not a great suppressor host. I seriously doubt that the #17 LP is "one of the most sought after devices there is".
A lot of people feel a need to "suppress all the things", but in most cases, the juice isn't worth the squeeze.

Link to comment
Share on other sites

On 5/17/2025 at 9:07 AM, Chef said:

Honestly, and no offense intended, but the HK91 is not a great suppressor host. I seriously doubt that the #17 LP is "one of the most sought after devices there is".
A lot of people feel a need to "suppress all the things", but in most cases, the juice isn't worth the squeeze.

Glad you feel that way, I do not.  Opinions are like........well you know!

Link to comment
Share on other sites

Flow through suppressors make the HK guns great suppressor hosts.  I run OSS on several of mine and they function great.  The PTR32 is my favorite.  Everyone loves it w/ the sear.  Even my kid can control it.

RCM makes a 36deg w/ a small diameter tail for the 21 & 21E.  It will work fine in a 91 carrier.  Not in stock at the moment (the huge # of 21 kits that recently came in is keeping them busy trying to keep them in stock.)

Link to comment
Share on other sites

  • 1 month later...

Thanks, but it looks like they only make the locking piece for the 91 and G3. Unless I couldn’t find it. The HK and Cetme locking pieces are not interchangeable. 
 

Also, who makes a heavy buffer for the G3 meat tenderizer retractable stock? I’m running one on my Cetme.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...