Aaron in Mohnton Pa Posted February 15, 2025 Report Share Posted February 15, 2025 (edited) I got this M60 bolt like this years ago... I believe somebody started doing the semi Auto Modifications to it... I did not make any of the cuts that are on it and this is how I received it..... The left lug (which is the one that gets chipped and damaged) is in phenomenal condition.... The right lug has been cut down in the area that is called out in the JRW prints (shown below for reference), firing pin has been modified in the back per the JRW prints, Semi Auto firing pin spring is in the bold body, it has an ejector, and extractor installed (exactly how I received it), The bolt cam actuator is USGI in phenomenal shape and does not appear to have been modified yet. There is a small chip on side of the bolt as shown in the last photo. I do not believe this will effect operation and if I am looking at the prints correctly, this area gets milled out. As mentioned above I posted the JRW bolt modification prints for reference. This is not ready to drop in and run on a semi, it appears as though somebody started the modifications though. Regardless of if you plan on building a semi or not, this has some really nice components on it... I will never use this, so its going up for sale. $450 SOLD SOLD Aaron - Mohnton, Pa Sales@BeltFeds.Com Edited April 6, 2025 by Aaron in Mohnton Pa Link to comment Share on other sites More sharing options...
Aaron in Mohnton Pa Posted February 15, 2025 Author Report Share Posted February 15, 2025 SOLD PENDING FUNDS - Buddy I’ll mark it sold once transaction is complete Link to comment Share on other sites More sharing options...
Recommended Posts