Navgunner Posted January 6, 2025 Report Share Posted January 6, 2025 (edited) Now Available on my website https://navgunner.com/ For Sale are a very limited production of NEW (US Mfg.) FN FNC bolts (stripped / without an extractor). This project was many years in the making but fortunately parts are finally complete and ready to ship directly to customers. I've invested many tens of thousands of dollars bringing this project to fruition, but it was well worth it! Thanks to these specialty boards (thank you @Buddy H), I was driven to make a small batch of new FN FNC bolt heads and as promised, all orders are currently being filled. Thankfully, there's a small number of overrun bolts that I'm making available to individuals, but I don't anticipate doing any additional manufacturing runs unless an organization wants me to produce a large bulk order (I don't see that ever happening). If you want one of these than order now because when their gone that's probably it. Please be aware that these bolts (even the factory new ones) were never “plug-and-play” so headspacing is critical. You must have a qualified professional gunsmith fit this (or any) bolt to your gun. Not for export, i.e. US customers only. All NFA rules apply. I accept POMO, Venmo, PayPal, Zelle, and face to face transactions. Please reference the project thread for details. Bolts (stripped) are $550 - contact member @fuatos if you need an extractor set. Bench Blocks are $25, these are lifesavers for extractor installation. Shipping is Flat Rate of $10 no matter how many you buy. About me: I'm a 07/02 FFL / SOT Licensed Manufacturer, Mechanical Engineer (B.S.), and US NAVY Vet. (Gunner's Mate First Class, Surface Warfare Specialist). Thank you, NAVGUNNER Edited August 2, 2025 by Navgunner adding website info 2 Link to comment Share on other sites More sharing options...
g36kinnc Posted January 7, 2025 Report Share Posted January 7, 2025 Aren't these the same as m249 volts and the extractors?As well? Link to comment Share on other sites More sharing options...
Navgunner Posted January 7, 2025 Author Report Share Posted January 7, 2025 3 minutes ago, g36kinnc said: Aren't these the same as m249 volts and the extractors?As well? The bolts are different between the saw and the FNC. Link to comment Share on other sites More sharing options...
mike in pa Posted January 11, 2025 Report Share Posted January 11, 2025 Extractors are the same, but as mentioned, the bolts are different. Link to comment Share on other sites More sharing options...
g36kinnc Posted January 14, 2025 Report Share Posted January 14, 2025 Cool Good to know. I also recall back then that firin̈g pin and spring same was used. Link to comment Share on other sites More sharing options...
JoshNC Posted January 16, 2025 Report Share Posted January 16, 2025 Just a plug for these bolts. I bought three of them from @Navgunner and could not be more pleased. This is a rare opportunity to buy a critical spare part for the FNC. I would recommend every FNC owner and any prospective FNC owner buy at least one bolt. Better to have it and not need it….. 1 Link to comment Share on other sites More sharing options...
Navgunner Posted January 16, 2025 Author Report Share Posted January 16, 2025 Thank you, @JoshNC! This project would never have come to fruition without supporters like you. 1 Link to comment Share on other sites More sharing options...
Navgunner Posted February 5, 2025 Author Report Share Posted February 5, 2025 I’d like to sell a few more of my FNC bolts; if there’s any interest, please shoot me a PM. As most of you already know, this endeavor was expensive so community support was/is the blessing that allows me to make these kinds of parts a reality. Thank you. Link to comment Share on other sites More sharing options...
Ehair Posted February 7, 2025 Report Share Posted February 7, 2025 Thank u @joshnc. I’ll send you a pm. I’m in. Thx all. Link to comment Share on other sites More sharing options...
Navgunner Posted March 3, 2025 Author Report Share Posted March 3, 2025 (edited) Now Available on my website https://navgunner.com/ where I can process credit cards. Thank you! Edited March 3, 2025 by Navgunner Link to comment Share on other sites More sharing options...
Navgunner Posted April 17, 2025 Author Report Share Posted April 17, 2025 I still have a few of these left (sold ~100) for those that are interested. I can’t see me ever making another batch so when they’re gone, they’re gone. Get them while they’re still available. 1 Link to comment Share on other sites More sharing options...
Navgunner Posted July 16, 2025 Author Report Share Posted July 16, 2025 My new shop if finally up and running; I’m excited for growth and thankful for everyone who’s supported my business along the way! With this new space comes new projects and with those efforts I legitimately don’t see us making another batch of FNC bolts. I’ve already sold 100ish units but still have a few dozen left in stock that I’d like to see moved into a new home. That being said, I’m offering a discount code that’s worth $200 off each FNC bolt on my website. Once the remaining inventory is lightened, I’ll turn off the discount code so please act quickly on this if you’re interested. https://navgunner.com/ discount code is FNC200 As an aside: I much prefer manufacturing to gunsmithing but I am willing to headspace a NAVGUNNER bolt to your upper for $200 plus return shipping (I’ll need your upper sent to me for fitting. Leadtime is currently 2 weeks (as of today). If you want this option please let me know in the order note so I can hold your bolt for fitment. Link to comment Share on other sites More sharing options...
Recommended Posts