520 Tactical Posted May 3, 2024 Report Share Posted May 3, 2024 Anyone have any PPS knowledge? Having issues getting a post sample to run. Using stock recoil spring the bolt doesn't seem to have the speed to strip a round and fire had one round go off out of battery. used a heavier spring that stripped and fired fine but would not cycle the bolt. The stock spring is not cycling action either. Quote Link to comment Share on other sites More sharing options...
WB1775 Posted May 3, 2024 Report Share Posted May 3, 2024 9mm or TOK? new receiver or reweld? Bolt could be binding, original spring could be worn and not aligned to provide proper strength. Ammo might not be strong enough to overcome Heavy spring. Could be a combination, any more details would help. Quote Link to comment Share on other sites More sharing options...
520 Tactical Posted May 7, 2024 Author Report Share Posted May 7, 2024 figured it out. Was magazine issue, 9mm set up little filing and adjusting the follower and everything is running like a sewing machine now. Quote Link to comment Share on other sites More sharing options...
Jtm35a2 Posted May 14, 2024 Report Share Posted May 14, 2024 When shimming the original 7.62x25 mags for 9mm. Shim at rear or front? My rounds go all stupid in the too long 7.62 mag. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.