dakotastomm Posted April 3, 2024 Report Share Posted April 3, 2024 (edited) With reference to Title 27, Part 479. Section 479.105(f), I am transferring the following firearms via eForm 3 to be in compliance with the aforementioned section. The transfer of these firearms does not require a Law Enforcement Demonstration Request Letter for transfer as per Section 479.105(f). My intent is to have these items disposed of NLT on June 30 2024. Form 3s will be filed starting around April 22, 2024. The following items are only available to 07/02 ffls and licensed importers. These are not for sale to the general public or standard dealers. If you are an 07/03 (paid the wrong sot), you are ineligible to purchase these too. Due to the nature of these items, they are being sold as is where is. If the form 3 comes back denied for any reason, the buyer will receive a refund less 20% "restocking" fee. The buyer will pay shipping and insurance on these items. I'll update the list as items sell. Payment to be sent via usps money orders or certified checks only. I'm not set up to take CC at this time. All guns will come with one mag. All guns run great unless noted otherwise. Shooting videos upon request. Additional mags are available. I will update the ad with pictures as I take them. SOLD [SPF]Century arms/mke AP5. Fullsize mp5 clone. Registered receiver gun with sear blocks removed. Tropical wide hg, rcm fa carrier, unmodified hk mp5 trigger pack, sef lower, mke a3 stock and one mke 30 round mag. $2650[SPF] Mp5a3 pics: https://imgur.com/a/SOCzCgr SOLD [SPF]Century arms/mke AP5P. MP5k clone. Registered receiver gun with sear blocks removed. K front grip, b&t side folding stock, rcm fa carrier. Also included is a #28 rcm locking piece. Sef lower with unmodified hk mp5 trigger pack. One mke 30 round mag. $2650.[SPF] Mp5k pics: https://imgur.com/a/x19JocM SOLD [SPF] Bushmaster Dissipator XM15-E2S. This is set up to be a clone of the North Hollywood shootout gun. 16 inch hbar Bushmaster dissipator barrel, triangle handguards, Bushmaster a2 upper, microbest m16 bcg, Bushmaster lower with Bushmaster m16 lower parts kit, lmt 4 position buffer tube and b5 car 15 stock. Will ship with one usgi surplus mag. $1700 [SPF] Dissy pics: https://imgur.com/a/DdtAmnL SOLD [SPF]"Baby m16". This is a take on a baby m16a1. This has a colt CH a1 upper, brownells pencil 10.3 barrel with non tapered delta ring, triangle handguards, and 3 prong flash hider. Lower is a standard radical arms lower with m16 lower parts kit with an original rock river arms entry/shorty a2 stock. Microbest m16 bcg with 601 charging handle. Will ship with one usgi surplus mag. $1700[SPF] Baby m16 pics: https://imgur.com/a/DcGbmVO ALL SOLD m16 lowers. Have 5x available. 4x are allen arms branded, and 1x is r&c armory branded. These are outfitted with standard m16 lower parts kits with standard milspec buffer tubes and m4 stocks. $600 each. [4x allen lower spf] ALL SOLD SOLD [SPF]16 inch Q sugar weasel. Standard m16 fcg. Will ship with one okay magazine. $2200[SPF] Sugar Weasel pics: https://imgur.com/a/JHYCo0v SOLD [SPF]Tactical innovations open bolt drum fed am 15 gen 2 22lr. This is a very rare setup. Lower receiver is an allen arms m4 lower. This setup will ship with one 165 round drum and winder. This is a modern take on an American 180 and is backward compatible with magazines and a few internal parts. $6000. [SPF] Am15 pics: https://imgur.com/a/hPMQ4XF Glock 18 conversion. This is a gen 5 glock 17 converted to g18 spec. It is currently sitting in a b&t usw chasis with steiner mps red dot. The selector switch was shaved to fit the usw as I wasn't aware they made a g18 spec unit. However, conversion was done by William at Gunshot residue in MS, and he will fit a new selector to the gun if you send it back in. Will ship with one 33 round glock oem magazine. $3250 G18 pics https://imgur.com/a/ejuQCie [SPF]Converted McKay uzi. This was a McKay semi-auto uzi receiver converted to nearly smg spec and has imi smg uzi parts installed. Registered gun with blocking bar removed, sear holes opened to work with smg sear, 8mm grip pin bushing, and cut down restrictor ring. Trunion is still semi spec, so you'd need to slightly turn down a new barrel to fit. But it includes a chopped barrel threaded 1/2x28. Has a rare type 7 polymer stock, uzi k Grip, and will ship with original handguards and folding stock as well as one 25-round magazine. $3000[SPF] Uzi pics: https://imgur.com/a/3SBFa84 SOLD [SPF]PTR Ptr51/hk51 clone. The gun itself is still Title 1, but the trigger pack is a h&k g3 modified to fit the gun and is the registered component. Has a g3 polymer a2 stock on the original ptr backplate/recoil spring setup. Has a standard clipped and pinned sef trigger housing. Also has a tropical wide handguard from brp. Will ship with one hk aluminum magazine. $2650.[SPF] Ptr51 pics: https://imgur.com/a/9Kb2xa0 SOLD [SPF]Steel ar15 dias. This is the type 2 design, if I remember correctly. Housing itself is made from mild steel, and the trip is made from 4140 pre hard. No additional trips are available at this time. Ran good on one of my standard Bushmaster lowers, but you may need to time or shim it to fit your gun. $500[SPF] [SOLD]Sten MK5. This is a Pakistani parts kit with us barrel. Built on an older indianapolis ordinance original ID tube. Imo the mk5 is the best sten variant as you get a nicer fixed stock with pistol grip. Will ship with two sten 32 round mags. $1400[SOLD] Tippmann arms m4-22. This was converted to fa using their in-house proprietary fa kit, which was a fa bolt, fcg, and buffer setup. 9 inch barrel pictured with a dead air mask, but will actually ship with a diligent defense company roadhunter 22lr can. Runs best with high velocity ammo. Will ship with 5 tippmann 25 round magazines. $2000 with ddc road hunter, $1800 without. M4-22 pics: https://imgur.com/a/LoCqEkE Edited May 29, 2024 by dakotastomm Quote Link to comment Share on other sites More sharing options...
agtstack Posted April 11, 2024 Report Share Posted April 11, 2024 Looking at the glock 18 pm me Quote Link to comment Share on other sites More sharing options...
RTK, LLC Posted April 11, 2024 Report Share Posted April 11, 2024 PM sent on McKay Quote Link to comment Share on other sites More sharing options...
ArmaRosa LLC Posted April 13, 2024 Report Share Posted April 13, 2024 M16 lowers. Interested Quote Link to comment Share on other sites More sharing options...
dakotastomm Posted April 27, 2024 Author Report Share Posted April 27, 2024 Bump. Uzi, glock 18 conversion, the tippmann m422 and One allen arms m16 lower and and one r&c m16 lower left, Quote Link to comment Share on other sites More sharing options...
In Alaska Posted April 29, 2024 Report Share Posted April 29, 2024 Interested in the Bushmaster Dissipator XM15-E2S if for some reason the deal doesn't go through. Thanks, George Quote Link to comment Share on other sites More sharing options...
dakotastomm Posted May 17, 2024 Author Report Share Posted May 17, 2024 Bump. Uzi and all lowers spf, glock and tippmann still available. Quote Link to comment Share on other sites More sharing options...
dakotastomm Posted May 29, 2024 Author Report Share Posted May 29, 2024 Bump. Possibly open to trades. Pre samples with cash on my end, factory sbr's, cans, Title 1 stuff etc. Quote Link to comment Share on other sites More sharing options...
dakotastomm Posted June 13, 2024 Author Report Share Posted June 13, 2024 Bump! Getting down to the last few days these will be available! Quote Link to comment Share on other sites More sharing options...
Dangerous Freedom Arms Posted August 13, 2024 Report Share Posted August 13, 2024 Did you sell everything? Anything still available? Quote Link to comment Share on other sites More sharing options...
Bulletsponge Posted November 3, 2024 Report Share Posted November 3, 2024 Any of this available yet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.