Greasegunner Posted November 25, 2023 Report Share Posted November 25, 2023 (edited) Here is a custom built sterling smg by Dons gun shop. It has been made from a special weapons company sten tube. This gun has been built so you can go from the standard sterling mk4 to the suppressed mk5 by changing out the front part of the gun. Each front piece unscrews from the gun and is locked in place with a set screw. Gun comes with 6 magazines and a couple extra spring sets. $18,500 This is a two stamper- its in my E file Inventory for Immediate Transfer Singles are easy in full auto mode since the ROF is very controlleable and slow You can slow it or speed it up with very inexpensive springs The reason for the extra spring sets is to get it the quietest I could using subsonic ammo in the suppressor so I had to trim the springs down. Depending on what ammo you are using when running suppressor, you may have to adjust spring length also. When in stock mk4 configuration, it uses the standard length springs. If you have any questions, feel free to ask. If there are questions that I think people should know, I will update description as we go along. below are videos of it running with each barrel https://youtu.be/7T4Sk5WTtB0 https://youtu.be/dtH-Rvf3IWA Edited November 25 by Greasegunner videos added Link to comment Share on other sites More sharing options...
bushwacker51 Posted December 15, 2023 Report Share Posted December 15, 2023 Sent PM. Link to comment Share on other sites More sharing options...
StevieP Posted December 27, 2023 Report Share Posted December 27, 2023 Sent you a PM, @Greasegunner Link to comment Share on other sites More sharing options...
Recommended Posts