har1690 Posted July 25, 2022 Report Share Posted July 25, 2022 Trying to disessemble my Stemple 76/45 for cleaning. Removed both set screws, remove the end cap and it looks like the spanner wrench loosens the "washer assembly" but slides out 3/4" of an inch. I can push the body back and fourth but that's it. Not sure if I have to remove the screw on bbl and bushing? Quote Link to comment Share on other sites More sharing options...
Gremby Posted August 11, 2022 Report Share Posted August 11, 2022 Do you have any pictures? Quote Link to comment Share on other sites More sharing options...
gftiv Posted August 11, 2022 Report Share Posted August 11, 2022 From what I understand, You are supposed to take the suppressor apart and clean at about every 100 Rds. I can put 500 rounds thru a suppressed MG in an afternoon. Carbon builds up and the baffles do not come out without a lot of work. I just shoot them until performance is unsatisfactory, Then send them off to the MFG for repair/cleaning. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.