Bellhop Posted April 4, 2022 Report Share Posted April 4, 2022 (edited) 5 old cast bolts for the MAC-10 from the 70's. They are preserved in cosmoline. These were left over when the RPB factory closed and the extractors holes weren't drilled. Thats not a problem as you can easily locate the needed hole by placing the extractor next to it. You can also weld the extractor in without any drilling. Two of them has the ejectors holes only halfway drilled. Again not a problem if you have a drill press. The placement of the holes are already there so it a super easy job. I got rid of my Drill press many years ago, otherwise i would do it. Numrich Gun Parts used to sell these for 210 each USED. They have been sold out for some time now. These are never used and brand new condition. $ 40 each plus shipping. Thanks 1. RPB in .45 Cal 2. RPB in 9mm 3. RPB in 9mm 4. Powder Springs in .45 Cal. 5. Powder Springs in 9mm Edited April 4, 2022 by Bellhop 1 Link to comment Share on other sites More sharing options...
Thumpy Posted April 4, 2022 Report Share Posted April 4, 2022 Pm sent 1 Link to comment Share on other sites More sharing options...
Recommended Posts