WTS: 20mm LAHTI L-39 anti-tank rifle ITEMS - L39 box, tools, spares and buffers

[W.R.C. from E.U.]

20mm LAHTI L-39 ITEMS for sale (Combine purchases for rebate)

20mm Lahti L-39 anti-tank rifle items

 

 

 

 

 

 

 

 

____________________________________________________________________________

I T E M   1 : ONE, 20mm Lahti L-39 at-rifle TOOLBOX #1 and several TOOLS

Great condition toolbox with several tools and accessories for 20x138Bmm VKT L-39 "Lahti" anti-tank rifle

Size 480mm x 180mm x 90mm wooden box, green color with nice markings

L39 tools and accessories as seen in picture

Price 680.00 $ (free tracked parcel shipping)

____________________________________________________________________________

 

I T E M   2 : SET of spares, SIGHTBAR PIN, PISTON COUNTERSPRING and BUFFERS for 20mm Lahti L-39 at-rifle 

Unused L-39 spareparts set consisting of;

ONE sightbar pin, ONE piston counterspring , TWO rubber buffers

Price 70.00 $ (free shipping)

____________________________________________________________________________

 

I T E M   3 : SET OF TWO (2 pc.) original 20mm Lahti L-39 at-rifle cartridge CASE and BOLT buffer spare parts

Very good condition and original 1940's sparepart rubber buffers for 20x138Bmm VKT L-39 "Lahti" anti-tank rifle

Size 34mm x 25mm (hole 7mm), made of rubber (L-39 spares manual list as Part N:o 130b and 162)

The L39 rubber buffer is a single type - dual use, ie. it works as case buffer and also as bolt buffer

(measurement appr. in inches 1,34" x 0,98" hole 0,27")

Original WW2 part made in Finland by VKT (A few sets available - purchase several and I'll provide a nice grand total)

The original LAHTI L-39 spares kit box has places for both buffers (see photo below)

Price for SET of TWO (2 pc.) buffers is 36.00 $ (free shipping)

 

____________________________________________________________________________

I T E M  4 : SET OF TEN (10 pc.) original 20mm Lahti L-39 at-rifle cartridge CASE and BOLT buffer spare parts

TEN very good condition and original 1940's sparepart rubber buffers (TEN units on a string) for 20x138Bmm VKT L-39 "Lahti" anti-tank rifle

Size 34mm x 25mm (hole 7mm), made of rubber (L-39 spares manual list these as Part N:o 130b and 162)

The L39 rubber buffer is a single type - dual use, ie. it works as case buffer and also as bolt buffer

(measurement appr. in inches 1,34" x 0,98" hole 0,27")  Original WW2 part made in Finland by VKT

The original LAHTI L-39 spares kit box has places for both buffers (see photo further above)

Price for SET of TEN (10 pc.) buffers on a string is 98.00 $ (free shipping)

____________________________________________________________________________

 

RECENTLY SOLD ITEMS:

SOLD : ONE SET of spares, EXTRACTOR, PIN & SPRING for 20mm Lahti L-39 at-rifle 

Unused L-39 spareparts set consisting of;

ONE extractor, ONE extractor pin, TWO extractor springs and TWO extractor spring guide rods

Price 90.00 $ (free shipping)

SOLD : ONE original 20mm Lahti L-39 at-rifle WOODEN SHROUD

Excellent condition and original 1940's barrel shroud/handguard for 20x138Bmm VKT L-39 "Lahti" anti-tank rifle

Length 670mm, diameter 65mm - Original WW2 part made in Finland by VKT

Price 440.00 $ (free shipping)

 

 

 

 

 

 

 

____________________________________________________________________________

Here is great video info on the L-39;

20mm Lahti L39 Antitank Rifle (Shooting and History)

____________________________________________________________________________

QUESTION: HOW OFTEN SHOULD THE BUFFERS BE REPLACED?

Answer: The L-39 users manual does not describe buffer change and sadly I have never seen an armory/armorer service manual giving guidelines.

Based on use and rounds fired one could RKI-guess that;

- The cartridge case buffer (rubber) should be changed after first signs of wear and deformation (parts of rubber missing etc.) so that one does not end up with badly dented ejected brass cases or having an uncontrolled "bounce path" of the case if hitting bare metal upon ejection.

- The bolt buffer (rubber) should be changed if showing deformation upon inspection after 200 normal cartridges fired, or if bolt carrier seems to hit (metal on metal) increasingly hard during maximum rearward cycle.

----

Look at how controlled the cartridge case ejection is when case buffer rubber is doing its job (reduce video replay speed to just 0.25 to really see details of buffer function);

Edited Friday at 08:30 AM by W.R.C. from E.U.

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

still available

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

Still available

[W.R.C. from E.U.]

Some new items

[mike in pa]

Email sent!

[W.R.C. from E.U.]

wooden shroud

[W.R.C. from E.U.]

shroud and buffers

[W.R.C. from E.U.]

Buffers

[W.R.C. from E.U.]

still available

[W.R.C. from E.U.]

some new L39 items