dakotastomm Posted April 29, 2021 Report Share Posted April 29, 2021 (edited) These Post-86 Dealer Sample machine guns are being sold as a no law letter gun as we will not be renewing our ffl or sot come July 1st. As per ATF § 479.105 (f), a MANUFACTURER or IMPORTER FFL with a valid and current SOT may take possession of this machine gun WITHOUT the need for a law enforcement demonstration letter. Type 01 Dealers with a SOT may also purchase, but will require a law enforcement demonstration request letter in order to take possession of this item. We will efile the form 3 for faster approval. Additional photos or videos available upon request. TRADES: I am open to trades! I'm interested in pre sample "keeper" or transferable machine guns. If you would like to make a trade offer or cash offer close to the listed price, please contact me. Payment for these items are to be sent via wire transfer or bank/personal/business checks or usps money orders. Checks may be held up to 14 days to clear before filing the form 3. *M2HB IS SOLD* First Up for grabs is a browning m2hb belt fed 50 cal. Also known as the browning m2 or the MA Deuce. This Gun was built on a KMP side plate and is a registered receiver gun. Was built using original browning m2 parts and runs great. A few high wear items were replaced as well as all new springs were installed as the originals were 60+ years old. A new old stock Sabre defense stellite/chrome lined barrel, a new usgi current issue buffer assembly, nos rear sight assembly and nos retracting slide group were all sourced to update it to modern components. The original blued/nitride barrel is included but it has seen heavy use over the years. Still passes bullet test but no way to gage wear. Does have some minor external and inner pitting. The trunnion, top and bottom plate and the left side plate all feature the same assembly serial number meaning they all came from one original gun. Original manufacturer was Rock Island Armory with 1.1 million serial number which would put it somewhere in mid to late 1940s from my estimates. The remaining parts feature various manufacturer codes from HS to AC to K. This Gun has had the bolt hold open parts installed which allows you to shoot the gun in single shot as well as full auto. The gun also has a stainless steel trunnion protector to protect the trunnion from wear or damaged from the steel links while in use. An Israeli barrel carrier is installed on the Sabre defense barrel as well. Included but not pictured is also a nos m12 hand held linker/delinker as well as a set of headspace and timing gages. Also included is 800ish rounds of once fired brass and 800ish once used m9 links in 50 cal ammo cans. This will also include a military issue m3 tripod assembly, pintile and t&e. No reproduction parts here. All 3 parts have various assembly numbers and are in good shape. Tripod has never been demilled and legs extend with no issues. However during shipping, the front leg lock bolt sheared off. Replacement can be had for less than $15 but it does not affect functionality so I have not replaced it yet. Have a few pricing options for this. If you would like the gun, both barrels and the tripod assembly it is $25000 delivered. $23,500 delivered for the gun and 2x barrels no tripod assembly. $23,000 delivered for the gun and the Sabre defense barrel. Additional photos can be viewed here: http://imgur.com/a/VrQLKsc http://imgur.com/a/SMUI0no Video of the gun running can be seen here: *M2HB IS SOLD* And finally up For grabs is a DNA Guns LLC M16 receiver assembly. These receivers were m16 cut from the beginning so no crappy conversion here. Receiver is marked Safe, Semi, Auto. This features a standard mil spec full auto fire control group. Standard milspec spring and Buffer installed as well. Will include a magpul moe stock and pistol grip. We have 2 (two) of these complete lower assemblies available. These have consecutive serial numbers but are identical otherwise. Our manufacturer mark is located just below the original makers marks on the right side above the fcg pins. With other No demo letter M16 receivers that are stripped and going for nearly $1800 alone, here is your opportunity to get a complete one ready to have your upper slapped on it with no additional work! These are $1500 each and are identical. If asking price is met, we will cover shipping and insurance on these items. If you're local, we can deliver them. Additional photos can be viewed here: http://imgur.com/a/sX6zIrK Edited June 6, 2021 by dakotastomm Link to comment Share on other sites More sharing options...
dakotastomm Posted May 6, 2021 Author Report Share Posted May 6, 2021 (edited) bump Edited May 12, 2021 by dakotastomm Link to comment Share on other sites More sharing options...
dakotastomm Posted May 12, 2021 Author Report Share Posted May 12, 2021 Bump! Don't be afraid to reach out with any questions Link to comment Share on other sites More sharing options...
Sniper1 Posted May 14, 2021 Report Share Posted May 14, 2021 PM Sent Link to comment Share on other sites More sharing options...
dakotastomm Posted May 18, 2021 Author Report Share Posted May 18, 2021 Tuesday afternoon bump. Quite a bit of interest in the m2, but no bites yet! Link to comment Share on other sites More sharing options...
dakotastomm Posted May 24, 2021 Author Report Share Posted May 24, 2021 Monday afternoon bump. Small price drops Link to comment Share on other sites More sharing options...
dakotastomm Posted May 29, 2021 Author Report Share Posted May 29, 2021 1919 sold! Link to comment Share on other sites More sharing options...
dakotastomm Posted June 3, 2021 Author Report Share Posted June 3, 2021 Price updates. Ready for immediate form 3 filing!! Link to comment Share on other sites More sharing options...
Recommended Posts