Jump to content

WTS Reg. Rec. MP5 A3 / PBS-5 (AK-74) 5.45 suppressor 600-22K


SDF

Recommended Posts

Fully transferable and is currently on a form 3 here in Az 

1. Registered Receiver 9mm MP5 A3 with an SEF lower.  Registered by "All Tech". Built on an Original HK94.  The smg is marked as original HK94 on the  of the receiver. has some rubbing wear in a few areas between the stock and the ejection port as seen in some of the pics. overall exterior is above 90% with the most  finish wear being on the SEF lower.  No dings  Stock  functions as it should. Firearm is well taken care of and functions as it should.  The Barrel is the original 94 and in excellent condition strong lands and grooves modified to MP5 standard.      The Bolt and carrier have some slight staining from use but overall VG++.  The rest of the internals are excellent.   Comes with 1 original magazine.                                                      

 $22k  + shipppin to your FFL

___________________________________________________________________________________________

 

2. PBS-5   5.45 suppressor.  Last of the prototypes we designed:

we had 7 prototype designs 6 in 5.45 and 1 in 7.62   For sale is prototype #5 5.45x39mm  adjustable compensation for reducing full-auto muzzle climb.                                                                                    Brief history on these PBS-5’s that we did. about 1997 or Reverse engineered the size and design from a couple of pictures of an original Russian PBS-5
Main changes during mfg were to the muzzle  design and the way the Can was adjustable. 
 The first prototypes 1-4 in 5.45 and the 7.62 went out to  guys in the gun research field over the years.  All Friends.  There was an article in the old  MGN on our 5.45 builds and also in the shotgun news back in the day before the internet went so crazy that it put that stuff outa mass hard copy print business. 
A mfg. we contracted with in Oregon  built the baffle stacks for these from the design we were thinkin about.  A comical angled series of cones. At the time I was not a suppressor mfg. and I am still not.....so Milligan is listed on the can as I contracted the work through him in Oregon. 
The idea was that these prototypes would be adjustable for the angle of the muzzle brake to better control climb. We speculated it was to control the rate of muzzle rise when operating in full auto function.  The adjustment could be fitted to the individual and not just the muzzle reaction from the lands and barrel twist rate among other things and each person tends to fire a weapon a little different. The original Russian At the time in the pics appeared to have a clamp for  attachment or this possible adjustment (all speculation at that point) but not enough info for a proper R&D on that type so the design on ours is a little different   Prototype 5 has Maybe has had about 500 rounds down it because the only difference between it and #4 was the locking lever and muzzle design.  The suppressor  is not as quiet as the final production baffle design that was built for us by Elite Iron but this was 20+ year old tech on this one and as I recall when tested It’s right on the good edge of needing hearing protection but still a good can with the consideration of how open, loose and loud an ak74 or for that matter all kalashnikovs are.  

Attaches to the AK74 24mm muzzle, standard russian or bulgarian thread.  Because its a thread-on design, for or alignment and correct function the host AK74 front sight base faced. 

O.A.L.  Approx.  8”

$600.00   delivered to your FFL/sot in the lower 48

Feel free to email, text or call with any questions

Thanks:

Steve Hill

SDF mfg.

602-538-2769

 

IMG_0004.JPG

IMG_0003.JPG

IMG_0002.JPG

IMG_0005.JPG

IMG_0006.JPG

IMG_0007.JPG

IMG_0008.JPG

IMG_0001.JPG

IMG_0685.jpg

IMG_0686.jpg

IMG_0687.jpg

Edited by SDF
information added
Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...