Search the Community

Showing results for tags 'russian'.

Found 23 results

  1. WTS: Russian AK47 Slab Side 30 Round Mags I have several excellent condition Russian 30 round slab side magazines available. These are beautiful mags and show only light storage wear. If they were used its almost impossible to tell. Some have very light electro pencil serial numbers added to the base portion of the body near the floor plate. Mags of this quality have not been available in years and are incredibly difficult to find. Get them while you can! ALL SPF **I will had pick for the best of the lot for an additional $5 per mag** Payment: Paypal plus the fee, Venmo, or Zelle Shipping: Actual Cost Contact: PM or email at (remove NOSPAM) cross posted
  2. WTS: Russian AK47 Mags - IZHEVESK Spine Stamp I have 20+ original Russian 30 round AK47 magazines available for sale. Each mag is is unissued condition and shows only light storage wear. All of the magazines bear the Izhevesk arrow in a triangle stamp on the spine along with other arsenal markings. Price: $80 each Shipping: Actual Price Payment: Paypal plus the fee or Venmo Contact: Email - PM or email at (remove “NOSPAM”) cross posted
  3. WTS: Russian 30 Round Flat Back Bakelite AK47 Magazines I have 5 like new Izhevsk marked Russian bakelite AK47 mags available for sale. These are the most updated type complete with steel inserts in the feed lips and flat spines. Each mag is in excellent condition and would make an excellent addition to any collection. These are getting harder and harder to find, get them while you can!! -Contact: PM or email at (remove NOSPAM) -Payment: Paypal plus the fee -Shipping: Actual price -Price: $80 each
  4. for sale: Russian SKS in 7.62x39mm with Laminated stock, Blade bayonet and New sling (not pictured) in NEW condition for $599 + shipping and insurance to your FFL. Please ONLY Email directly to for questions or more pics. Thanks, Myron P.
  5. The B&T USA / Brugger and Thomet KH9 was made in Switzerland and designed by Karl Brugger as Karl's Hobby 9mm which is a modernized Italian Sites Spectre M4 double/single action submachinegun with several design improvements. The KH9 has the option of feeding from either standard B&T magazines interchangeable with all of their firearms or includes a Finnish Soumi KP31/M31 magazine adapter to use coffin magazines. The recoil-springs operate on twin guides as opposed to the Spectre which is free floated and prone to binding. Receiver is a monolithic SCAR-type with quadrail and taken from the B&T GHM9. Barrel has an HK three-lug adapter. Controls are completely ambidextrous with magazine release and decocker on both sides. Charging handle was inspired by the Ingram M10 or IMI/IWI UZI, Pistol grip was based on the SIG SG550/STGW90, and the rear trunnion uses standard B&T MP9/TP9 stock/brace assemblies. Package includes hardcase, Soumi coffin magazine adapter, front/rear flip-up sights, two 30 round magazines, cleaning kit, manual, and hard-case. Photo is representative of another of my B&T KH9 examples. The firearm you will be receiving has not been fondled or touched. Made in Switzerland, this is 1 of 400 imported. Once gone, these will not be seen again. $2000 shipped.
  6. I have for sale a 1943 model 1895 Nagant revolver made at the Tula Arsenal. Comes as pictured with holster, cleaning rod, reversible screwdriver with handle and leather lanyard. Unissued. Unfired. Imported by R Guns. C&R OK. Will ship direct to C&R holders otherwise will ship to the FFL of your choice. Will do FTF in Kokomo, IN. $330.00 SHIPPED CONUS I accept credit cards, PayPal and Postal MO. Add 3.5% for credit cards and PayPal. No added fee for Postal MO or PayPal if funds are sent via send money to friends and family" aka "discreet paypal"
  7. StormWerkz scope mounts for the Arsenal SAM7K AK’s with the Gen 2 dust cover. StormWerkz has taken care to make as much rail possible in the space available on the top covers. These affordable krink scope mounts are ideal for many of the new compact optics on the market today. The mount body is completely CNC machined from aerospace aluminum and anodized matte black. Mount only, dust cover not included. For more information visit our website SAM7K scope mount
  8. We have a 1944 Russian Ppsh41 that was acquired in 1951 from Korea and brought back to the states after the war. The original owner filed a US Treasury Department/IRS Form 1 on November 19,1962. Approved on December 19,1962. It was sold as part of an estate sale in 2006 after his death, to a buyer in Albuquerque NM. Where the weapon was originally registered. It was reactivated, (barrel replaced) and then transferred to a Form 4 by the previous owner. The original barrel comes with the purchase as well as the bolt, as the firing pin has been compromised. How, who knows? There is a replacement barrel and bolt in the weapon. We purchased this Ppsh 41 in 2008 and took it out a couple of times since. We have a short video from a few winters ago. This weapon has patina from its use and travels, the buttstock has some Cyrillic letters on the left side. The original stock has seen a lot of action, but is still in one piece and fits the weapon nicely. The markings,(date 1944 and a star) on the top of the receiver; and these markings are the most common out there. The matching SN also appears on the outside bottom of the trigger guard and on the lower receiver that extends into the top of the buttstock. This firearm comes with a parts stock. I highly recommend using this stock when shooting it. One drum and 2 stick magazines are included. Also, included is the original Form 1 with the original envelope and the assorted stamps, (Dallas TX office of the A&T.T.) on the back of the Form 1. A short biography of the veteran who originally owned this subgun. It will transfer out on a tax exempt Form 3 to your SOT of choice. It can transfer to a C&R FFL on an approved Form 4 or a Form 4 to a non SOT Nevada buyer. We have plenty of photos and a video on request. Everything is in our Dropbox file, so we can send links via email for those interested. Been a member of the boards since 2003... David DCI, 07/SOT Reno, NV
  9. Listed is an Original NDM-86 7.62x54R Dragunov SVD Sniper Rifle. This particular rifle is a rare All Matching Numbered Pre-Ban CJA Springfield 1985 Import Norinco NDM -86 Dragunov SVD 7.62x54R. A limited amount of these rifles were brought in to the country before the imports were stopped. The rifle comes complete with original scope as well as the original scope box. The wood furniture has been replaced with the "Current Issued" Russian SVD furniture, that is completely resistant to weather and humidity changes that effect accuracy. The rifle comes the current an original Russian Issued Russian Furniture which goes for over $500 by itself if you can find one. One cool feature of the Current Issued Russian SVD Stock is that the cheek rest rotates quickly so that the operator can go to iron sights very quickly. Original 10rd Magazine is included. These particular imports don’t come up often. Very accurate out to 800 yards with match ammo. A great historically iconic firearm for those that want to own one of the most effective, reliable and iconic DMR rifles ever made and fielded. A real factory Dragunov SVD in its currently issued configuration. Everything pictured is what is included in the sale. Price Reduction: $SPF No sales to CA or Restricted States. Will only ship to FFL ***PLEASE PM ME WITH ANY QUESTIONS*** Thank You
  10. I have a like new, looks like it was never fired Tula SKS with matching numbers. $600 Plus Shipping to your FFL from non FFL, or FTF in Northern Illinois. Discretete PayPal or Postal MO will work.
  11. FOR SALE: Transferable Model 1910 Russian Maxim. There are not many of these in the registry and they don't come up for sale often. The Russian Maxim is arguably the pinnacle of water-cooled simplicity and reliability. Parts, ammo, and accessories are still plentiful for this model to include barrels, locks, belts, belt-loaders and 7.62x54r ammo. This particular 1910 was put together by the "Russian Maxim Master," Bob Naess of Black River Militaria. Bob built this 1910 utilizing a C&R MG08 side plate and pre-war (1938) Tula arsenal numbers-matching parts kit . This 1910 package consists of everything pictured (except ammo) to include a freshly redone Sokolov wheeled mount**, extra lock, steam fitting with hose, regular booster + "2-speed booster" (pictured) and wooden shipping crate. ** please note the 1910's versatility to fit other mounts / tripods to include the Vickers tripod and pretty much all of the Browning medium machine gun mounts to include the 1917a1 and M2 tripods. This 1910 Maxim is on Form 4 in TN. Price is SPF (funds up front) to include both 1st stamp and shipping PM if you're interested...references and proof of life happily provided.
  12. WTS: Krebs AK74SU SBR

    I have one factory built Krebs Custom AK74SU style SBR. The rifle is chambered in 5.45 and features a side folding triangle stock and furniture finished in a classic Russian red scheme. The form 4 lists Krebs as the manufacturer and "AKSU" as the model. This came out of a large NFA collection and has been shot very little if at all. The gun is currently on a form 4 in Wisconsin, stamps are on the buyer. One 30 round magazine will be included. I am happy to talk to any interested party by phone, just contact me as outlined below and Ill forward my number. -Price: $2000.00 -Shipping: Actual cost -Contact: PM or email me at (just remove NOSPAM)
  13. Looking to sell my left over RPD parts kits I had a full size and Shorty built these are the two kits I have left 1. Egyptian Parts kit covered in Cosmoline with a drilled barrel ( was told its repairable) receiver pieces included with a DSA receiver -$1000 +shipping to your FFL 2 Polish RPD parts kit Mint Condition with intact original Polish made hammer forged chrom-lined barrel comes with receiver pieces included and DSA receiver $1400+shipping 3. Russian made AK barrel I have been told its a AK-103 barrel only stamp on the barrel is Circle Y $1000 shipped 4. Tula Krinkov BFPU parts kits 1992 Dated Comes with matching top cover,carrier and trunion, New bolt ,piston head and correct twist barrel ( this barrel was made for 1986 kits but will work with this kit just takes some work)- $1650 plus shipping 5. Izzy AKM Russian parts kit all major part matching -$950
  14. WTS: Russian Bakelite 30 Round AK47 Magazines I have several original Russian bakelite 30 round AK47 magazines available for sale. These high quality mags feature a unique orange bakelite construction which is sure to make them stand out on any AK. The bakelite mags are thought by many to be the cadillac of the AK mag world. High production standards and smooth feeding combined to produce a mag that is highly sought after by all. I have several available. Contact me for further details. Shipping is at actual cost. These qualify as pre ban. Contact me regarding sales to ban states. I only have Izhevsk produced examples available at the moment. -Price: $50.00 each -Payment: Paypal gift, standard paypal plus 3.5%, or USPS money order -Shipping: Actual cost -Contact: IM or email me at (remove NOSPAM) Photos below are representative of the lot
  15. WTS: 2 Russian TT33 Tokarev Pistols, Ammunition, Accessories First off the good. I have a pair of Russian TT33 pistols made at the Izhevsk arsenal available for sale. Now the bad. Each has been modified from its original state in some way. The particulars are below. Shipping will be at actual cost. -Payment: Paypal gift, standard paypal plus 3.5%, or USPS money order -Contact: IM or email me at (remove NOSPAM) Pistol 1: This TT33 is a 1952 dated example with matching numbers throughout (with the exception of the magazine). The pistol does not carry the “slashed box” rebuild stamp and looks to carry its original finish. The bore looks great and the frame carries a unique “TSR” stamp by the serial number which I have not come across before. There is a single line Century import stamp on the slide and the frame has been fitted with a safety. Also included is a nice unmarked surplus holster with spare magazine, cleaning rod, and lanyard. Overall a very nice package. -Price: $550.00 Pistol 2: This TT33, as can be seen from the photos, has suffered the wrath of bubba. It started as a 1947 Izhevsk with matching numbers on the slide, frame, and barrel as well as an un numbered hammer group. At some point it looks like the right slide serrations were milled of to allow for access to the firing pin retaining pin. It was them stamped in the milled area as shown in the photos. At the same time the frame and magazine base plate were refinished with a gloss black while the slide and trigger were hit with a gloss red. The bore shows wear but lands and grooves are strong. The lanyard loop was removed as well. This is an ideal candidate for a refinish or a range gun. Shoot this while your safe queens sit comfortably at home. -Price: $400.00 In addition to the pair of TT33s this lot will also include a variety of both surplus and commercial ammunition. -Norinco yellow box - 51 Rounds -65 rounds mixed surplus -280 rounds Czech Surplus on stripper clips -50 rounds PPU commercial -12 rounds S&B commercial *458 rounds total* -Price: $200.00
  16. An unissued Russian spotting scope. These scopes were issued to snipers and often used with the Dragunov SVD. Its in great shape and the glass appears to be flawless. It comes with the wrapped amber filter and cleaning cloth in the picture. We received this as part of a package with one of our original Russian military SVD's. Magnification is 4x-20x adjustable and it has a ranging reticle similar to the PSO-1 scope. Here's your chance to own a rare optic in excellent condition. ... ting-scope I got lazy and copied this ad because this guy knows more about this optic than I do. I guess these are the range finder optics used for snipers in Russia. Has the amber lens and clamp mount so you can pretty much mount it in many different places. The importer's info on this optic: "Spotting Scope with Range Reticule Variable Power Military Scope MP 4-20 x 40 Magnification range 4 X - 20 X Field of view 1.5 - 9° Ocular adjustment -5 / +10 Weight 1 lb. Measure 11.5" x 2.5" (dia) Genuine Soviet issue made for Spetznaz (Special Forces Units). Used for concealed observation and remote sniper correction. Amazing Soviet era workmanship. Sensational image quality multy-coated optics. Tuned metal body parts, individual serial number and logo of Novosibirk Optical Works - one of the famous Soviet Optical Manufacture from the World War II, deep yellow light enchantment filter. Superior Soviet Military gray enamel finish. Incorporates 2-dimensional military style rangefinder reticule for fast estimation of the distance to the object or object physical dimensions. Telescope can be hand held or mounted to virtually any object or surface (bench, board, stub, tree...) with the provided universal clamp and 360° pivot mount. Comes in a military style soft case with detailed English instructions on use of the range reticule." © 2001-2007 Lan Optics International. All rights reserved. 15 Sparhawk Drive, Burlington MA 01803, USA Here is a great article that shows examples of this scope in use: $275 This optic was made for the Spetznaz, pretty cool if you ask me. Pics available to serious buyers
  17. I have for sale 1 new Russian hammer spring made by Izmash. $9 Shipped. Example: I accept Postal MO, PayPal and CC. Add 3% for PayPal and CC. DM me for payment instructions.
  18. I have for sale another hard to find Russian AK part. One complete NEW recoil assembly with spring. Example: $33.00 Shipped. I accept POSTAL MO, PayPal and CC. Add 3% for PayPal and CC. DM me for payment instructions.
  19. I have for sale 1 Russian safety selector with bolt hold open notch. NEW Saiga takeoff. Made in Russia by Izmash. $25.00 + $5 Ship. I accept POSTAL MO, PayPal and CC. Add 3% for PayPal and CC. DM me for payment instructions.
  20. I have for sale one NEW current production complete Russian AK bolt head. Russian bolt head assembly for current production Russian rifles, including all Saiga 7.62 and Arsenal's SGL20 and SGL21 series rifles. VERY hard to find! Made in Russia by Izmash. Example: $150.00 & Shipped FREE! I accept POSTAL MO, PayPal and CC, Add 3% for PayPal and CC. DM me for payment instructions.
  21. I have for sale one NEW current production Russian AK47 bolt carrier with gas piston. Works with Saiga or other AK-74 rifles 7.62x39, 5.45x39 or 5.56x45 caliber. Made in Russia by Izmash. Still has the tab needed for full auto use. Example: $100.00 + $12.00 Shipping CONUS. I accept POSTAL MO, PayPal and CC. Add 3% for PayPal and CC. DM me for payment instructions. I combine shipping for multiple items.
  22. ALL PARTS NEW I have for sale one unfinished project Russian Saiga barreled receiver chambered in 7.62x39. This started out as a complete 16" barrel rifle. I bought this new, never fired it, started it as a SBR/ pistol build and never finished it. Included is the complete receiver minus the FCG, with a 9 1/8 inch chrome lined, 11 degree target crowned and 24x1LH threaded barrel. Also included are the original manuals, cleaning rod, safety selector, bolt head, bolt carrier with piston, recoil assembly, hammer spring, front sight parts, "krink" gas piston, unknown new reg length gas piston, 4 gas piston rivets, 2 grip screws, 3 grip screw nuts, axis pin, various e clips and sight/ gas block pins. The bolt and carrier are matched to the barreled receiver. Includes everything pictured except the gas tube. Gas tube pictured is not included. A note about the "krink" piston: Gas piston made for use with AK pistol builds. This is made from machined stainless steel then heat treated. Overall length from end to end is 2.48". The length excluding the threads is 2.0" WAS $500.00 plus $35.00 ship NOW $350.00 I'll do FTF in Kokomo, IN. If you want to come get it. Or ships FREE to your FFL. **Updated 12-7-2016** I accept Postal MO, PayPal and CC. Add 3% for PayPal and CC. No fee for PayPal "friends and family" payment. Damn cat hairs...