Search the Community

Sold. Thanks! Time to make some room! The full auto M2 is on the way and could use the space. Like new semi auto M2HB built on a KMP Classic Arms right sideplate and sear by Black Label Firearms. Test fired less than 100 rounds total, not even broke in yet. Just cleaned and lubed up. Includes 100 rounds of new Lake City 4:1 linked ammo and a headspace Go/No Go gauge. Mounted on the massive and stable M63 ground mount. Don't need to sell it but also don't need it... $16,000 w/ M63 mount. Just the gun $14,000. Just the mount after the gun sells $3,000. As is, where is. Whole package picked up North West of Houston Tx, shipping would be pricey but possible.

WTT/WTS High Standard C&R M2 with mounts, 2x barrels, ammo, links, spares and accessories as shown. Reduced to $65k (or offer?) for the entire package, or make offer for individual items you want. Also interested in combination of $ & trade for transferable 1919 (gun or RHSP) or maybe HK21? Or transferable M16 lower, lightning link, DIAS, or 9mm MACs possible as well. Package includes - High Standard receiver SN 1065xxx in M2HB config. Reweld/weld repair RHSP. - 2x barrels, one might be stellite - M3 tripod, pintle, T&E - M31-style pedestal mount with M23 equilabrator cradle w/ extra pin, ammo can tray and canvas cover. - 200 rounds linked APIT - M7 linker/delinker & bucket of links - Headspace & timing gages - Spares: 2x extractors, 1x stripped bolt, 1x driving spring rod assy - Misc accessories: heat resistant mit, ruptured case extractor, cleaning rods & brushes. This is not an all-original gun, but it is a great shooter! Condition of all items is as pictured. Buyer pays transfer(s) (for the M2HB) and actual shipping/transportation costs from SW FL. All terms and conditions subject to agreement by both buyer and seller. All NFA, federal, state, local or other applicable laws, rules, regulations, etc. apply. I have a C&R FFL and can transfer to C&R licensees. Thanks Thanks!

Colt M3 M2 .50 caliber M2HB Springfield Browning This is a Colt manufactured M3 .50 cal model that is a Colt factory original M2 receiver. This is not a side plate receiver but original Colt factory complete M3/M2 firearm and it is fully transferable. It is marked "Manufactured by Colt M3 A.C. Basic" (see pictures) and is a Colt M2 receiver and parts so the cyclic rate is that of a M2 at approximately 600 rpm. Colt and Springfield worked together starting in 1937 to develop a faster shooting M2 they would call later a M3 to be used as an anti-aircraft machine gun. This firearm also has not been shot very much and may have only been test fired from looking at the internal parts and areas of the firearm. We test fired and it shot perfectly. Firearm comes with a M1919 .30 cal. bipod. We can provide more close-up pics as needed. Just describe to us what area of the firearm you want to see photos. Buyer pays actual shipping and insurance. Ready to transfer on a e-form 3. Asking $65,000 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. We will not ship to Alaska, Hawaii or outside the US. All NFA rules apply. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money order payable to JOHN NORRELL, INC. Firearm will be shipped when payment clears the bank and the ATF eform transfer has completed. Should the bank put a hold on funds, the firearm will be held until that hold clears. Buyer will have 5 days to inspect firearm upon receipt by the FFL holder. Any issues or questions should be addressed during that time. This item is listed by, and the website and postings are monitored by Ann Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant. Stock no. N-1182

FS are three new construction M2HB semis by JnC Manufacturing. These were done out of parts from like-new M2HB FAs demilled out of gov’t service more than 20 years ago. Not the junk Izzy and cull-seconds parts and parts kits that are now available. These were constructed from four parts kits bought in the 1990’s (keeping one). The barrels are new in cardboard tubes. JnC built the guns about 5 years ago on his semi side plates. He test fired. They have not been shot in my hands. Will crate for $50 and ship at your expense to you or FFL if you are not an FFL. They look new, they are new. $14,300 OBO with plain jane M3 tripod and cradle. Yes I trade but has to be Vveeerrryyy interesting to make m bite. Pics for an email.

Found a direct contact with DI Optical for a DCL 110 and DCL100 red dot sights for the M2HB and M249 BUT, concerned that company invoice is s scam??? Anyone doing business with them out of Santa Fe Strings, CA? Retailers are saying [product discontinued but I have an invoice with prices for two items allegedly discontinued. PAYPAL request for payment - if it's a scam will I get my $k back? Just askin!

The model number is for a heads up red dot sight for 12.7mm .50 Browning with a range knob for adjusting the impact range of the dot. They make red dot sights for 50-762-556 heavy and LMGs with range knobs to adjusting the red dot. DI Optical sold some 1000 of the DCL120s to the US military for use in Afghanistan back in the 2007s or so. Anyone use or heard of issues or how this sight worked on the Ma Deuce? Also interested in info on the DCL110 and DCL100s made for SAW and other LMGs in the two smaller calibers. Anyone ever use the DCL110 or DCL100? Recoil issues? Not seen one for sale in forever - any in private hands?

M2HB Complete Bolt assembly as new never been in gun $750 SOLD M2HB Complete barrel Extension bought as new and never installed any of my guns $450 SOLD M2HB Buffer Body assembly complete $450 SOLD M60e3 Long Barrel assembly (missing carry handle) $1500 M60e3 Short Barrel assembly $1600 SOLD M60e3 Short Barrel assembly shot out for demo/inert display $900 SOLD

I’m in need of some M2HB Parts per the below list. I prefer NOS items. PM or email for fast response, thanks!! M2HB items needed: Barrel Extension - stripped or complete Spade grip set Assembly Stripped Bolt Barrel Support Trunnion - looking for excellent condition LH side plate Top Cover - stripped or complete

Mint Mk 93 soft mount for the Browning 50 cal gun. Includes the Universal Pintle Adaptor, ammo box holder and new brass/links bag. This mount works excellent with the M3 tripod. It provides a buffered recoil as well as a mount for the ammo can. The UPA allows the mount to attach to a vehicular ring/turret. $2750. FREE SHIPPING to the lower 48 ONLY. Also have lots of ball ammo, mint lined barrel, WW2 optics, mint WW2 linker, bore gauges, and a few spare parts left....For more info email codeofarmsllc@hotmail.com or call 580-938-2964

Mint WW2 M63 AA mount for the 50 cal BMG. Includes side plate trigger mechanism. Early solid brass base has new ball bearings. Original grips. All pins and chain intact. Includes ammo can and holder. This is as good as you will ever find. $2750. FREE SHIPPING to the lower 48 ONLY. Email for more info codeofarmsllc@hotmail.com or call 580-938-2964

Very nice fully transferable E.R. Maples M2HB. My personal gun that I will probably regret selling. I have owned 3 of these and this is my last one. Runs flawlessly. Includes a WW2 M3 tripod that is serial numbered to the gun, USGI barrel that gauges new, carry handle, T&E, pintle, gauges with USGI pouch , USGI cleaning kit and transit case as pictured. The gun will include and ship in a fitted Pelican case. $38,995. Selling out my complete collection of BMG stuff, M63 AA and MK93 mounts, optics, tools, spares, 3K of ammo, etc. all available for sale as well. Call Al Walton / Code of Arms LLC @ 580-938-2964 anytime or email codeofarmsllc@hotmail.com. E-Form 3. More pics available. Have a video of this gun and my MG34 at the range. If interested in checking it out, email me and I'll forward it on to you. .

Ad retracted, decided to keep.

Need an M3 T&E locking arm. This is for the larger T&E used with the .50 not the .30. Thanks.

Ad retracted.

Semi auto M2HB M3HB Browning patent .50 Cal belt fed. $13,000 shipped to FFL. This rifle transfers just like any other rifle through an FFL. No NFA tax required because it is semi auto. This gun is a WWII reproduction using new made parts and some original parts. It comes with a LIFETIME guarantee from manufacturer. The side plate has reproduction WWII M2 Browning markings but exact manufacturer markings may vary. Heavy buffer and heavy backplate not the flimsy one's that are held together with cotter pins. This is by far the best built M2HB / M3HB on the market. NOT Ohio Ordnance or TNW build. Quality built by veteran machinist to exact military specifications. Rivets are perfect not sloppy. Included: Standard ground gun sight's NOS Heavy barrel Heavy Buffer Heavy backplate Head space gauge NOS M2 heavy bolt Tripod T&E Pintle Your choice of original M3 military issue tripod, or new current issue lightweight MK193 aluminum tripod, T&E and pintle. Must ship to FFL only. I offer a three day inspection no hassle money back guarantee. IMG_6416 by Davy Keith, on Flickr

MK93 Mount $750 plus shipping or pick up at Knob Creek.

I'm sell a brand new Broadhead Armory M2HB package. Its a sideplate that I sent to JNC to get built to a standard M2HB. I paid extra to get the new trunion and whole inside receiver box hardened chromed. Since owning it I've never fired the gun. I'm selling the gun as a package, there is no ammo included with deal. Here is what is included: tripod, T/E, pintle, new Oysterbay barrel, 2 rear picatinny mounts ( 1 flush, 1 raised mil spec), barrel handle, flash hider, barrel bag, 2000ea. M7 links, belt linker, spare parts, headspace gauge, and manual. The only thing not installed is the bolt hold function. Its currently on a form 4 in CT and set up in F/A only. Asking $36,500 , first stamp paid and shipped to your dealer. Cash, certified funds, 50/50 ok, or other payment arrangment can be discussed. I've expanded trades that I may consider, they are transferable M60 , Hk21 or Aug trigger, Hk sear/pack, AR-15 DIAS +/- cash. Inspections and item located in Tolland, Connecticut. Contact me for any questions. gtaforever88@yahoo.com 49 pic album; https://imgur.com/a/FJuFn

Early pre war M3 tripod ,dated 1940 , Rock island mfr.. with correct and unusual T&E, correct pin and nut for the T&E,locking degree wheel, appears uncut,unrefinished and totally correct for a pre war Colt M2HB..very similar to the rear cover diagram in The Browning Machine Gun IV by Dolf Goldsmith $4500 plus shipping

Fresh find from Knob Creek a couple weeks ago. An original Colt M2HB blued barrel. At the time I purchased it, barrel was gauged at less than zero on the throat erosion gauge! Didn't have a muzzle gauge but it can't be bad if the throat is this good. Finish is a little worn may have came off a display gun. Only mark on the barrel is a "C" which leads me to believe it's a Colt barrel and very possibly a WWII one. Bore is frosty but I've never seen one that wasn't. Strong lands / grooves. $650 shipped

Looking for an M3 USGI tripod with T&E. Thanks.

Very nice heavy duty Naval Pintle for Gunboat sides, riverboat mounts, stand up pedestal mount, should bolt easily into nice diameter pipe/tube to make a great stand up mounting for range shooting for firing lines. or off the deck of your house! 225.00 plus 18.00 shipping, This is complete with bottom bolt, and capture push button cross pin. Also available a set of exc. to mint M2HB tripod pintle and T&E with new type capture push button pin for the M3 Tripod, All GI Not foreign junk! 150.00 for the set!!! Also have ots of small new M2HB Parts available. enquire, Paypal or M.O. ok. GPrue8@aol.com is best and quickest or text / call 828-773-1938 Greg

Looking for opinions, most likely stemming from experience I'd suppose, as to which parts are "must-have" spares when taking a M2HB to machinegun shoots...please share your thoughts. Direct email: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email. Thanks! Nick

I have the following New condition M2HB US GI .50 Cal items 1 Complete Bolt, new with all parts 400.00 1 New complete Barrel extension 225.00 1 New Barrel support with Shim 175.00 1 Complete Bolt parts replacement kit, all parts to complete a stripped M2HB Bolt 150.00 1 Complete Drive recoil rod assembly, new in package 40.00 New Head space and timing gage set 40.00 Barrel bearing new, goes in barrel support 40.00 Front sight set of all parts 40.00 Rear sight ladder new 40.00 Extractor, new 45.00 Breach lock compete assembly all parts 70.00 Buffer complete housing and internal spring group, all new, 175.00 Tripod pintle, exc. 50.00 Belt holding pawl set for trunnion with spring and side pin 50.00 Rear cartridge guide assembly 50.00 Front cartridge guide 20.00 Belt feed lever, new for top cover 25.00 Sear bar 25.00 Belt pawl slide for top cover assembly 40.00 Extractor side bar assembly 30.00 M10 Side charging group complete new 150.00 Complete Side cocking handle group assembly, new 275.00 Firing pin , new, 20.00 Firing pin extension new 25.00 Many grip parts, for spade grip frame Other small parts available just inquire 828-773-1938 Email direct is best GPrue8@aol.com

Discrete Paypal or MO. or your good check! Looking for a friend the following as trade wanted or cash paid VZ-61 Skorpian Parts kit/mags for his post sample, and HK-21e mm21e23E/MM23E HK/MM11e/13e parts, barrels, ammo boxes, whatever you have, and also a PK or PKM Barrel in nice condition. 828-773-1938 I have 2 only nice condition US GI Original M3 tripods for the M2HB all parkerized complete and with all markings 1050.00 shipped I have a nice exc. condition recoil shock absorbing MK-93 mount that will fit on any small pintle of .50 tripod complete with side ammo can cage rack and elevator yoke/T&E, and frame and brass catcher assembly, (The Cadillac of mounts) latest and greatest! also have for the buyer available extra, the rare M240/M249 SAW GI adapter bracket that drops into cradle 3 guns in one and it fits the MK-19 as well so 4 systems one mount! 1450.00 1 Nice mint looks new T&E mechanism for the tripod 125.00 1 Used VG T&E Mechanism complete 85.00 WTS The following M2HB Parts all original and as new condition NOS (New Old Stock) First!!!!!!!!!!! M2HB Parts for a spare parts Survival Kit I have put together to keep your valuable Ma Duece going. Contains all parts in pic, 400.00 and comes packed in a .30 Cal. ammo can for nice storage, see parts pic below. Plus I have some other small parts and a set of buffer discs included but not shown, Second is Misc. parts for you; Barrel extension exc. condition 1 only, 200.00 Barrel support new condition with Barrel shim 185.00 Buffer housing new in wrap 125.00 Buffer recoil for housing, 75.00 new Front and rear Cartridge holders for trunnion new set 85,00 ask if you just need front or back only Top cover feed arm, new 30.00 Top cover feed arm circular switch new 25.00 Bearing for trunnion new 40.00 Left side RARE emergency cocking handle new in wrap 35.00 Timing nut assembly complete new 30.00 sear bar new 30.00 Side extractor switch assembly for left side of receiver 40.00 Belt holding pawls and side long pin set 40.00 Top Cover belt slide assembly new 65.00 Set of spade grip frame top and bottom and both grip parts with trigger, bolt release and latches and selector for bolt release buffer discs set (to build a stripped frame) 150.00 Accellerator 35.00 Bolt beech block new 35.00 Breech lock assembly for bottom of receiver all 4 parts that block locks into 75.00 Recoil spring complete with rod in package 50.00 Firing pin new 30.00 Cocking handle with metal grip insert to attach to side 35.00 Rear sight ladder assembly new 40.00 Firing pin extension new 25.00 set of new buffer discs 10 25.00 Rare M10 Side charger group complete with pull cable 150.00 all in new condition Front sight complete 40.00 sear for bolt, new 20.00 lever trip for top of bolt new, 20.00 (Also have small side bolt parts just askl Here is the spare parts survival kit below and includes not shown buffer disc set and some small other parts not shown.400.00

Have 2 M2HB Barrels, Stellite Lined Current issue, that are as new very slightly used, out of wrap, 98% finish 700.00 ea. 2 Complete right side charging cocking handle assembly all new with large plate ready to mount on the side plate 300.00 1 Very rare M10 side cocking handle group with pull cable complete all in new condition 175.00 1 Barrel carry handle 50.00 1 Head space and timing set gauge 45.00 Rear sight ladder complete (No Bracket) 40.00 Front sight with Hood 35.00 Complete Breach block assembly that bolts into bottom of receiver That locks up the bolt complete with block and all parts with flat spring and large bolt and nut 75.00 ea. M2HB Exc. T&E mechanism 100.00 M2HB Dual rail QD Scope mount 125.00 M2HB Buffer housings new in wrap 125.00 ea.complete with Internal spring buffer group 200.00 ea. M2HB Barrel support new in wrap, with Shim 185.00 ea. M2HB Barrel extension, excellent 200.00 M2HB Spare parts survival set with the following; All NOS New condition! Super deal on all the hard to find parts in a set to put away for your expensive baby! Recoil spring group complete Firing pin Firing pin extension Timing Screw assembly Feed slide arm for top cover Sear bar Sear Side pins, for bolt Release lever for top of bolt Extractor switch set for inside receiver Feed pawl assembly parts for top cover Cartridge guide front and rear set Extractor assembly Breech block assembly Accelerator Various springs, flat and round, Rear takedown spade grip release Belt feed slide assembly Bolt switch Top cover handle latch Belt holding pawl Trunnion pin long, for belt pawl All for only 400.00 for the entire set!! If you want individual parts only, please ask, I may be able to accommodate your needs! 828-773-1938 GPrue8@aol.com is best to make sure its not going to spam as is happening sometimes.