Search the Community

Showing results for tags 'g3'.

Found 30 results

  1. This is a Fleming registered receiver 91 (G3) standard configuration. Really nice rifle. Let me know if you would like any other pictures and I will add them. This rifle is on a form 4 in Kentucky. First transfer will be paid as well as shipping to your FFL/SOT. $23,999. Please contact me with any questions at 859-361-9444 or rext269@aol.com.Thanks for looking! Rex Tyson Kentucky Firearms
  2. G3 Eickhorn Bayonet

    I acquired this on a trade with a PTR A3 rifle. Sold the rifle and now have the bayonet and no need for it. Would consider a partial trade on a M1 Carbine bayonet. Asking $275 shipped Send me a pm and can show feed back from other forums. Thanks INFO This KCB-77 example was manufactured by A. Eickhorn GmbH, Solingen (AES). Shortly after Eickhorn's 1975 bankruptcy, members of the Eickhorn family formed a new firm, A. Eickhorn GmbH & Co. für Schneidwaren und Waffen KG (AES) [in English, A. Eickhorn Company for Cutlery and Weapons L.L.C.]. Because GMS owned the squirrel trademark, AES developed the generic trademark shown on this bayonet: three hexagons containing the letters “A,” “E,” and “S.” When GMS went bankrupt in 1981, the squirrel trademark and other GMS stock were acquired by E & F Hörster GmbH & Co. AES obtained a license to use the squirrel trademark on bayonets and combat knives from Hörster ca. 1982–83. The 1984 AES catalog shows both the hexagon and squirrel trademarks. This bayonet is shown on page 3 at bottom left. Following Hörster’s bankruptcy in 1996, AES re-acquired exclusive rights to the squirrel trademark.
  3. PTR 32 7.62 x 39 ,runs 100% maybe 500 rounds with box 1 mag maybe 2 if I can find the other magpul mag I have for it. Gen II 1000.00 shipped to FFL
  4. Factory HK-91 Magazines These are the ones that came in the boxes when sold back in the late 70 early 80’s Un-issued New OLD STOCK HK-91 HK-51 G3 C-91 PTR 20 rd. Steel magazines for the (7.62x51) 308 rifles. Chrome Steel follower, Dark Gray Parkerized finish Stamped Date code "IC" 7.62x51 The magazines will show very minor storage and handling marks (They are 40 Years Old) No major dings or deep scratches, Some slight rust might be present. I cleaned up a few with Break Free and they looked Brand New. Some of the Paper wrapper will be torn & deteriorated slightly Photos are part of the Description Mostly “IC” but I have a few “IB” & “HJ” $30.00 each Shipping (Where Legal) $8.00 USPS Padded Flat Rate Envelope (up to 3-4 Mags) Steven www.newmilitarysurplus.com
  5. Heckler & Koch Hk G3 SG1 with the appropriate “SG1” marking on the receiver, not the G3FS marking. The G3SG1 marking is especially rare and desirable vs the usual G3FS marking. This is a complete package, authentic G3 SG1 7.62 x 51 rifle in very, very nice condition. There is minimal wear on this rifle. Aside from one scuff mark on the receiver, the rifle is in excellent condition and has been fired very little. The high definition photos speak for themselves!! The date code on this HK G3 is IE (1984) so it is among the newer Pre-May Dealer Sample HK G3’s and it is currently on a Form 3. Included in this package is the following: RARE SG1 Marked HK G3 SG1 bearing an IE Date Code! Original H&K Green Storage Box 3 Magazines Original Tool Kit ZEISS Diavari 1.5-6x Scope sitting on a Schubrichtung scope mount Sight Tool Miscellaneous Parts, including extra rubber eyepiece for scope, Lens Cleaning Kit, Muzzle Cap, etc. All NFA rules apply. Shipping is $125.00. Please keep in mind that with the case, this is a very heavy package to mail. I am happy to add insurance at Buyer’s expense. The final winning bid reflects a cash price. Please add 3% for credit card purchases. This rifle is for sale elsewhere so I reserve the right to withdraw the ad at any time. Price: $13,900.00 or Best Reasonable Offer
  6. Excellent condition Genuine German HK 91, G3 bayonet, scabbard and wire cutter. $135 shipped to lower 48. + $15 shipping to lower 48.
  7. WTS: Genuine German HK large rubber recoil pad. $$29 shipped to lower 48.
  8. WTS: Genuine HK Clubfoot stock with heavy buffer and large rubber recoil pad. $350 at HKparts net. I asking $175 shipped.
  9. WTB: HK G8 50rd drum

    Hi here, looking for an original 50rd drum in NEW condition. Any help would be appreciated. Thanks, Matt
  10. For sale. MR762 or 556 convex buttpad $40 SOLD MR556 HK tube and Buttstock (Commercial) $150 SOLD G36 Rail carrying handle 1.5x no specs $275 SOLD G3 A3 stock used, lets call it a battle field pickup look. $165 SOLD
  11. Sale: Various from $199 to $4,000

    Shipping is $20, insurance extra / If you see something you like send me an email for pictures to: class2fl@aol.com. ALL HK 91/G3 Host Gun w/ wood furniture and rare HEAVY bipod - $4,000 HK4 in 9mm Kurz (.380) with .22 conversion kit, box, papers, etc. - $975 NIB Colt 6920MP-R $975 NIB Colt 6920 $925 NIB Keltec KSG $725 NIB North American Arms 22 magnum pocket revolver w/ Factory Locking Metal Case $275 NIB Keltec P32 - $199 ----------------- No sales in FL Thanks, GM / WPB, FL (class2fl@aol.com) - lots of references FFL / SOT
  12. All in stock and ready to ship!!HKG3,91 & PTR Alloy 20 Round Mag - Used VGhttps://www.hkparts.net/shop/pc/HKG3...-111p18068.htmPrice: $6.7420 Round Aluminum Magazine German HKG3,91 & PTR - Exc/Like Newhttps://www.hkparts.net/shop/pc/20-R...ew-111p524.htmPrice: $9.95Magazine Alloy - 20 Round - HK G3, 91, PTR - Newhttps://www.hkparts.net/shop/pc/20-R...ew-111p524.htmPrice: $9.9520 Round US Made Magazine HK 91, G3, PTRhttps://www.hkparts.net/shop/pc/20-R...R-111p2612.htmPrice: $19.95HK G3/91/PTR Factory Sealed Mag Pack - 5 Packhttps://www.hkparts.net/shop/pc/HK-G...-111p18037.htmPrice: $89.95HK G3/91/PTR Factory Sealed Mag Pack - 10 Packhttps://www.hkparts.net/shop/pc/HK-G...-111p18184.htmPrice: $178.95G3, 91, PTR & CETME, C308 Shooter Value - 36 Pack - Alloyhttps://www.hkparts.net/shop/pc/G3-9...-111p16905.htmPrice: $124.95G3, 91 & PTR 20 Round Steel Magazine - Used - Surplushttps://www.hkparts.net/shop/pc/G3-9...-111p17696.htmPrice: $9.95G3, 91, PTR 20 Round Mag All Steel - Used VG-EXChttps://www.hkparts.net/shop/pc/G3-9...XC-111p834.htmPrice: $24.95HK91, G3 20 Round Steel Magazine Latest HK Productionhttps://www.hkparts.net/shop/pc/HK91...on-111p542.htmPrice: $79.95G3, 91, PTR & CETME, C308 Shooter Value - 36 Pack - Steelhttps://www.hkparts.net/shop/pc/G3-9...-111p17390.htmPrice: $249.95G3, 91, PTR & CETME, C308 GUNSMITHING SPECIAL - 36 Pack - Steelhttps://www.hkparts.net/shop/pc/G3-9...-111p18069.htmPrice: $119.95
  13. All in stock and ready to ship! G3, 91 & PTR - US Made Trigger Pack - 4 U.S. 922 PartsPrice: $219.95https://www.hkparts.net/shop/pc/G3-9...-107p17949.htmZenith 9mm US Made Trigger Pack - 4 U.S. 922 PartsPrice: $249.95https://www.hkparts.net/shop/pc/Zeni...s-88p17878.htmHK German SEMI .308 Trigger Pack CompletePrice: $114.95https://www.hkparts.net/shop/pc/HK-G...te-107p217.htmAmbidextrous 9mm US Made Trigger Pack - 4 U.S. 922 PartsPrice: $299.95https://www.hkparts.net/shop/pc/Ambi...s-88p18269.htm
  14. HK41 – Manufactured in May 1966 by Heckler and Koch in Germany and imported by the Santa Fe Division of Golden State Arms, Pasadena, California. Semiautomatic 7.62x51mm predecessor to the HK91 with a pushpin receiver grandfathered under the Gun Control Act of 1968. All matching parts with exception to buttstock and magazine with the receiver’s 785 suffix on the bolt-carrier, bolt-head, locking-piece, and grip-frame. Stock trunnion has a 680 suffix. Magazine is late production steel. Overall condition is 98% with near perfect parkerizing and very good condition wood furniture. Fired very few rounds, rifling is sharp, bore is bright, internals are clean, and zero scope-mount or ejection marks. Outside of the earliest 1962 examples which sell for over $20K, this is the earliest example of the semiautomatic Heckler and Koch G3 with the correct pushpin placement, paddle magazine release, and the original grenade-ring. Doesn’t get much better than this for a 51 year old rifle. $8K. Thanx. SAMMY!
  15. WTS: HK G3, RDTS MP5SD

    HK G3 Transferable registered receiver machine gun. Original conversion done by Fleming Firearms. Recently refinished and updated by Investment Grade Firearms, including new barrel, anti-rattle paddle, optic rail, mlok hand guard and latest German bolt group. Unfired since being restored - like new condition. $19000 OBO HK MP5SD built by RDTS with German parts kit on a Special weapons receiver. Investment Grade Firearms recently installed a new barrel, anti-rattle mag paddle and completely refinished. Suppressor also built by RDTS. This is a two tax stamp gun. One for the SBR and one for the suppressor. Like new condition, functions flawlessly and makes a great host for a HK registered auto sear. $7000 OBO
  16. I have a stripped FMP G3 bolt carrier for sale. It is in good condition overall, but has very light surface rust in a few places. See pics. Asking 75 plus shipping for it, that is what they are on Sarco. Payment via discreet PayPal or USPS MO Crossposted, will update if it sells elsewhere
  17. Any info on the one with the shorter rod? All my other stocks for "K" guns have two-piece rods. Direct email: nick.gorgenNOSPAM@gmail.com
  18. German military surplus, in surplus condition, as shown. Buttstock with metal and forearm grip. $150 ea shipped. USPS MO ONLY***** Contact by email. jdweyeguy at gmail dot com
  19. I have for sale 1 impossible to find NOS as in NEW genuine HK leather sling for the HK G3, 91. Will of course work with clones. Comes as pictured and shipped to you for $33.00 conus. I accept PayPal and CC. No fee for paypal 'friends and family" payment. DM me for payment info.
  20. SOLD PENDING FUNDS.. do not delete. I'm selling one of my 2 identical carriers. I use one in my G3 and this is another I got for a project that didn't happen. Since these carriers will last literally forever, I don't need 2. German Rhinemetall G3 full auto bolt carrier (also works fine for semi-auto weapons, does not make your semi fire FA). HK, FMP and other G3 manufacturers produce bolt carriers from two pieces of steel which are welded together. Rhinemetall of Germany was contracted by the German Government to build the finest HK G3 rifles. This lead Rhinemetall to use a one piece of solid billet to mill the bolt carrier as a singular part. By using this method the carrier is stronger, though more costly, more robust under all conditions and enables the improved design to take a lifetime of abuse and hard use in combat conditions. The Rhinemetall bolt carrier is the most desirable G3/91 F/A carrier. As it is the only one-piece carrier ever made. Complete with locking lever, spring and axle installed. Carrier is compatible with: HK G3 HK 91 PTR-91 SAR 3/8 HK SR9 Vector 308 Clones Century Arms C308 or other HK style builds or clones If you want THE very best bolt carrier available, this is the one. This particular carrier is dated 06/63. Robert RTG wants $179.95 plus shipping. Get mine for $160.00 shipped in CONUS. (NOW $149.95!) I accept PayPal (no fee for "friends and family type payment") and CC add 3%. DM me for payment info. Reply to listing for any questions. Here's RTG's listing for the same bolt carrier. HERE
  21. WTS: Surplus Metric Pattern 20 Rnd FAL Magazines - In The Wrap - ALL SPF I have 20 standard metric pattern 20 round FAL magazines available for sale. Each mag is individually sealed and looks fantastic. I have had these stored away for several years so Im not sure as to the original country of origin. I believe that they are reconditioned as opposed to factory new. Each features the same dark gray non reflective finish and all appear to be in great shape. Cross posted. -Price: $20.00 each -Shipping: Actual cost -Contact: PM or email me at bevisblack15NOSPAM@yahoo.com (remove “NOSPAM”) -Payment: Paypal (gift or standard plus 3.5%) or USPS money order, all sales final WTS: Surplus Steel HK G3 20 Round Magazines - In The Wrap - ONLY 4 LEFT I have 20 excellent condition steel HK G3 20 round magazines available for sale. The mags are all individually sealed making them ideal for long term storage or immediate use. Manufacturers appear to be a mix of both HK and Rheinmetall. These are high quality magazines that are made to last much longer than comparable aluminum examples. I believe that these are reconditioned as opposed to factory new. Each mag exhibits a beautiful even non reflective dark gray finish. Cross posted. -Price: $10.00 each -Shipping: Actual cost -Contact: PM or email me at bevisblack15NOSPAM@yahoo.com (remove “NOSPAM”) -Payment: Paypal (gift or standard plus 3.5%) or USPS money order, all sales final
  22. Form 3 gun for quick and easy transfer (I am not a dealer but my SOT dealer has it in his possession). Very good condition HK G3K IB date code. Very low round count. Conversion done by Fleming he is the maker on the paperwork. HK Collapsible stock, 1 magazine, Ambi pack. Very rare gun. $22,000 Price DROP $19.5K in Oregon.
  23. MP5SD clone with TPM Suppressor and Transferable Fleming Sear SPF Registered in All Calibers so you can move to any host you want for this will be a one or two stamp transaction depending on state you live in buyer pays all fees shipping etc. The gun is registered as a pistol the HK Fleming Sear is on a form 3 and the TPM can is on a form 4. The gun will come with one HK German 30 round magazine and comes with the A3 stock and Navy SEF trigger group. The sear will transfer on a Electronic Form 3 which have supposedly been taking only a few weeks to clear. **A2 stock used for picture reference only.** The gun was only test fired a few rounds the Sear pack has only been test fired a few rounds and the TPM can has only had a few rounds tested through it the gun/sear/can are virtually brand new. There may be a few guys who will vouch for me on here What is included in this package: 1x Registered Fleming Sear Pack Registered in all calibers currently set up in 9mm Electronic Form 3 Transfer 1x SW MP5SD Pistol transfers immediately 1x TPM SD Suppressor Form 4 1x A3 Adjustable Stock 1x SEF Navy Housing 1x Full Auto Carrier and Bolt Group 1x 30 round HK German Curved mag