Search the Community

All sold, will mark sold when I get to a desk top, can’t do it on my phone. M249 SAW barrels. 15 complete short barrels, 2 short barrels missing carry handles, 1 short missing a muzzle brake, and 1 long barrel w/adjustable gas missing a carry handle. Total of 20 barrels. All used military barrels. Would like to sell all. Text David Huff 502-541-3919 DH Machine Guns

Linked M249 SAW Ammunition with 4:1 Tracer Bullet Type: FMJ, (Full Metal Jacket) Bullet Weight: 55gr Bullet Jacket: Copper Tracer Color: Red Case: Brass Velocity: 2900 fps Powder: Non-Corrosive Primer: Boxer Non-Corrosive Amount: 200 round 4:1 tracer linked with M27 links for M249 SAW PURCHASE HERE Metal machine gun links are considered “feeding devices” so if your state has a magazine capacity restriction, we cannot ship links of any quantity as they could easily be made into capacities over the limit.

Ok, These are the last 2 M249 SAW Mags I have that I was saving as my own personal stash. Loading Guide is inside the 200 rounder. Both magazine pouches fit nicely into the carry pouch if the 100 rounder is kept empty. So I am trying to sell the three pieces together, but if you want just one piece, message me... 1 ~~~ M249 SAW F.N. 200 Round Nut Sack - NEW 1 ~~~ M249 SAW 200 Round Magazine Pouch - USED ,Very Good Condition. 1 ~~~ M249 SAW F.N. 100 Round Nut Sack - USED, maybe New? , Very Good Condition All three items above are $100 - Shipped Priority Mail to lower 48. ( pics below) To purchase any of the items above you need to message me here or, call or text me at Seven - Seven - Three - 447 - Eight Thousand. I will take PayPal payment for the items. The only other items left for sale in this listing are the Helmet and the Powder Scale. ~~~~~~SOLD~~~~~2 - M249 .223 Cal F.N. 200 Round Nut Sacks / Magazines in Digital Camo that are in very good condition. The inside flap, when opened, has the diagram of how the belt should be layered in the magazine If they went through more than a couple belts of ammo I would be surprised. The sacks have a little dirt on them but if you hand wash them they might just look like new. You can tell by the rigid tops that they have very little, if any use. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ $50 Each + Shipping~~~~~~SOLD~~~~~~ ~~~~~~SOLD~~~~~1 - M249 .223 Cal F.N. 200 Round Nut Sack / Magazine in Woodland Camo. The sack is slightly dirty, will wash up nice, but no excessive visible wear on it. The normal wear from use you will see on the solid polymer top part. ~ ~ ~ ~ ~ ~ $45 + Shipping~~~SOLD~~~ ~~~SOLD~~~1 - M249 .223 Cal F.N. 100 Round Nut Sack / Magazine in Woodland Camo. (in Pics Above). The sack has some minor visible wear on 2 bottom corners on the side that has the 2 polymer strips sewn in for rigidity. And same as above, the most wear you will see on the upper rigid polymer top part of the magazine. ~ ~ ~ ~ ~ ~ ~ ~ ~ $30 + Shipping~~~SOLD~~~ ~~~SOLD~~~1 - M249 200 Round Nut Sack / Magazine Pouch , Used with visible wear but fully functional and has 2 slits cut on the sides to make magazine removal easier, I guess. ~ ~ ~ $10 But only with purchase of Magazines.~~~SOLD~~~ 1 - PASGT Helmet w/ Digital Camo Cover & Chin Strap, Size - Small , By Specialty Plastic Products , DLA 100-88-C-4397 , NSN 8470-01 092-7526 This helmet is in very good condition, it has the old 2 point chin strap. It is the first in the series of modern helmets that started in the early 80s. And I am letting it go for the super low price of ~ ~ ~ $45 Shipped to lower 48. 1 - LYMAN PRO 1000 Scale, as you see pictured, looks ok used, missing the calibration weight. ~ ~ ~ $45 shipped to lower 48 Ok, I hope this listing comes out ok. I have not been around for a while. To purchase any of the items above you need to call me at Seven - Seven - Three - 447 - Eight Thousand. Or text me at the same number. I will take PayPal payment for the items. I always prefer to talk to my buyers because I want them to know exactly what they are getting. I am over 60 yrs old , life is too short to be playing games. If you ask about me on the feedback board I am sure there will be nothing but positive reviews. AND please remember to send a zip code so I can calculate shipping cost. And finally, I ship only to The USA, Prefer the lower 48 but will ship to AK, & HI if I have to. As always...first to contact me AND to send Payment gets the Item. If you text or message " I'll take it!" then disappear for the next 12-24 hours and another buyer comes by an hour or two after you and wants to pay right away, Guess who gets the item and who looses? Thanks to everyone for looking at my new load of stuff. I will be adding more all day and all evening today. Even during the game!

New in VCI plastic bag, with wick in barrel. Mk46 barrel for M249. No sales where prohibited.

Looking for full-auto BCG and complete trigger frame/box with internals for FN M249. Direct email only, please: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email.

We are selling 800 rounds (four 200-round linked belts) of Federal Lake City 5.56mm linked M855 green tip 62 grain ammunition w/orange tracers. These are complete with starter tabs in black M249 SAW drums, ammo can and bags. The head is stamped LC10. The orange tip tracer round is every 5th round. The asking price is $500 plus $30 shipping. Must be 21 years of age to purchase. We will need a drivers' license or copy of FFL to purchase. Will not ship to CA, CT, CO, HI, MA, MD, NJ, NY, IL, D.C., or AK. This item will be shipped from John Norrell, Inc. Continental U.S. only. Please look at the photos and have confidence in purchasing. Acceptable payment will be in the form of either a cashier's check or a money order made to the order of JOHN NORRELL, INC. Unless otherwise advertised, buyer will pay actual carrier shipping with insurance and adult signature. This item is being sold by E. A. Shelnutt for John Norrell, Inc. Please enclose a copy of your personal identification containing your name and address. We would also like your phone number and email address and a description of the item being purchased in the envelope with your payment. Negotiation does not constitute a “hold” on items for sale. Please be aware that if your shipment is returned for inability to deliver, you will be expected to pay a second shipping charge to re-send. We require an adult signature on most shipments. Norrell123

M249 Para Barrel Assembly. This appears to be new and never mounted or fired. The barrel is marked 3S679, 5.56mm with a twist of 1/7. Barrel length is approximately 13 7/8". The barrel assembly is 16 1/4". The barrel includes the barrel, front sight, front sigh assembly, and carry handle. All NFA rules apply. This barrel can't be installed in a M249SA unless the rifle is registered as a short-barreled rifle (SBR). US Army Coyote M249 barrel carry case/bag. New. Bag is marked 1005-01-508-1356, DAAD 16-03-F-0067, Chautauqua, CO, NYSARC The price is $195 plus $25 shipping. This item will be shipped from John Norrell, Inc. Continental U.S. only. Please look at the photos and have confidence in purchasing. Acceptable payment will be in the form of either a cashier's check or a money order made to the order of JOHN NORRELL, INC. This item is being sold by E. A. Shelnutt for John Norrell, Inc. Please enclose a copy of your personal identification containing your name and address. We would also like your phone number and email address and a description of the item being purchased in the envelope with your payment. When an interested party offers to purchase with the full amount advertised, that party will be the buyer and all other negotiations will cease. Please be aware that if your shipment is returned for inability to deliver, you will be expected to pay a second shipping charge to re-send. We require an adult signature on most shipments. Norrell123

Gun Lab M27 E-Z Link is the answer to linking up 5.56x45 ammunition. Constructed of 6061 T6 Alloy and a Steel guide plate the E-Z link is the perfect companion to any of today's belt fed weapons such as the FN M249 SAW, FN 249S and the ARES Defense MCR platforms. Link up to 20 rounds at a time with one pull of the assist lever. Simply lay out 20 M27 links and 20 rounds of your favorite 5.56x45 and join them together by pulling the assist lever. Belts can be made in any length or quantity. The E-Z link features a no-skid neoprene base and covered assist lever. The Gun Lab M27 E-Z Link can be used on a workbench or a kitchen table. Save both time and sore fingers using this device. Technical specs Weight - 4.75 lbs. Dimensions - 10.5 x 7.5 Material - 6061 T6 Alloy, steel guide plate, neoprene anti-skid base This item is used and in excellent conditions. Included with the E-Z skid are over 2,000 links for the M249 SAW $275 plus $25 shipping in the continental US only. This item will be shipped from John Norrell, Inc. Continental U.S. only. Please look at the photos and have confidence in purchasing. Norrell123 Acceptable payment will be in the form of either a cashier's check or a money order made to the order of JOHN NORRELL, INC. This item is being sold by E. A. Shelnutt for John Norrell, Inc. We would also appreciate your phone number and email address and a description of the item being purchased in the envelope with your payment. When an interested party offers to purchase with the full amount advertised, that party will be the buyer and all other negotiations will cease. Please be aware that if your shipment is returned for inability to deliver, you will be expected to pay a second shipping charge to re-send. We require an adult signature on most shipments.

Dual illuminated ACOG optic and green dot RMR Trijicon. M-249 ballistic reticle # TA11 MGO-M249 . 3.5 x 35 S/N 78741 This is a new unmounted complete set-up the U.S. Military uses for the M-249. Includes the below items. GDI lever mount R-Come-Model (Combat Optic Mount) NSN-1240-01-5657-4490 ARD Tenebraex cage sunscreen NSN 66501-1-581-6243, PN –SDO000-ARD-FP Trijicon RMR green dot optic Original manuals for both optics Deluxe optic carry case. Price is $1600 This item will be shipped from John Norrell, Inc. Continental U.S. only. Please look at the photos and have confidence in purchasing. Acceptable payment will be in the form of either a cashier's check or a money order made to the order of JOHN NORRELL, INC. Buyer will pay $30 UPS shipping with insurance and adult signature. This item is being sold by E. A. Shelnutt for John Norrell, Inc. Please enclose a copy of your personal identification containing your name and address. We would also like your phone number and email address and a description of the item being purchased in the envelope with your payment. We will ship to FFL in the continental US only. Please be aware that if your shipment is returned for inability to deliver, you will be expected to pay a second shipping charge to re-send. We require an adult signature on most shipments.

The FN M249S is a semi-auto version of the M249 SAW light machine gun. This rifle features the signature 20.5 FN cold-hammer forged, chrome lined barrel and operates from a closed bolt position. It will accept both magazine and linked ammunition belt. Rifle has been fires with a 100-round belt one time. This package includes M249S semi-auto Pelican case with M249 foam cutout (heavy duty handles and wheels for easy transport) Front pistol grip Tactical handguard Hydraulic stock - adjustable One 200 round box mag One 100 round nut sack mag One 30 round magazine One brass catcher This firearm is post-recall, meaning that it has been serviced/repaired at the factory per recall instructions. The new Trigicon ACOG-dual illumination lever block base optic and green dot RMR trigicon ARE NOT INCLUDED. The optics package will be available to the purchaser for an additional $1600. Ammunition IS NOT INCLUDED. This item will ship from John Norrell, Inc. This firearm was function tested and visually inspected only. It has not been test fired. Please bid accordingly. Acceptable payment will be in the form of either a cashiers check or a money order made to the order of JOHN NORRELL, INC. Buyer will pay actual UPS shipping with insurance and adult signature. This item is being sold by E. A. Shelnutt for John Norrell, Inc. Please enclose a copy of your personal identification containing your name and address. We would also like your phone number and email address and a description of the item being purchased in the envelope with your payment. We will ship to FFL in the continental US only and buyer must provide the FFL to us. Please be aware that if your shipment is returned for inability to deliver, you will be expected to pay a second shipping charge to re-send. We require an adult signature on most shipments. We do all that we can to achieve customer satisfaction. Norrell123

WTS: M249 SAW Forward Pistol Grips - NEW I have several brand new in the wrap M249 SAW forward pistol grips available for sale. These are designed to interface with any standard picatinny rail system and offer greater control and increased handling capability. The grips lock in using a simple tension screw making installation fast and easy on any firearm. Price: $50.00 each Shipping: Actual Price Payment: Standard PayPal plus the fee or USPS money order Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM)

Machine Gun Armory MK-46 latest Model 3 beltfed 5.56mm semi-auto rifle. It is lightly used and offers closed bolt operation with the HK type lower for addition of a registered post sample trigger group for SOT holders who want to convert this to full auto. Price is $5500 plus shipping. Very similar to FN M249 SAW but built in Utah USA For additional info contact mattNOSPAM@whispertech.org (remove NOSPAM)..

I'm looking for M192 Lightweight Infantry tripod for the M249 SAW or M240. Also looking for M249 PARA barrel, 200rds Black Plastic box, etc. Please let me know your price, condition, picture via PM. thanks!

I'm in need of 2 - M249 cocking channel cover retaining pins that mount the cocking channel cover to the top cover. The NSN # is 5315-01-128-5618 and the part # is 9348303. I'm short 2 of these and will have completed my top cover assembly. Any leads or help finding these would be greatly appreciated thanks in advance

I have available all new MK-48 Parts to convert M249 SAW to 7.62 NATO; All are in New condition,, I also have M240B and L parts available These will not fit M249 S semi (I do have M249S parts available, See my other ad, Barrels, front rails, spare parts, stocks, tools, optics, 7.62 Top feed Cover with rail complete 1200.00 7.62 Barrel complete 1850.00 7.62 Feed tray 400.00 7.62 Slide group 750.00 Ultra RARE FN Made MK-48 Titanium Bipod (Cost is 2000.00 from FN,,,.SELL 1 ONLY ...700.00 other parts coming.for MK-48 Rare M240L Short barrel, New SALE only 2 left with factory Vortex flash hider, complete 750.00 Standard heavy M240B Barrel, new, 750.00 M240L standard lightweight barrel, exc. very hard to find, complete 700.00 Also have all sorts of parts and accessories in stock for M240B and L M240H Spade grip group complete conversion for M240 to H version, as new, 700.00 M240B or L Rail top cover exc. condition (upgrade for optic mounting 225.00 M240 Bolt stripped , new 225.00 M240 Op-Rod complete 200.00 M240 75 rnd assault drum 75.00 new M240 Recoil group, complete new 60.00 M240B Buttstock complete 150.00 M240 Coyote Bulldog heavy padded sling, new 50.00 Combo tool new in wrap to change extractor, cleaning carbon 40.00 Tripod adapter, 75.00 T&E complete with adapter exc. 125.00 (Fits 249 and 240) lots of small parts, Also parts available for the M249 and M249S GPrue8@aol.com (This is best to email direct) 828-773-1938 call or text to hold items

Long time lurker, New member/seller here. Please feel free to email me directly if you have any questions (davidp0102@yahoo.com). Thanks! This is new in wrap, just taken out for pics. Never fired and still has the wick in the barrel. Asking $255 Shipped USPS Priority. I can accept PayPal "Friends and Family" or "Goods and Services" plus 3%. Money orders are ok too.

M249, ARES Shrike and FN Minimi (or anything else using M27 disintegrating metal links) owners can easily and reliably link .223 and 5.56 ammo belts. This easy to use M27 linker: * holds 25 rounds * has extra space for a starter tab when using a nutsack * has a unique, rotary handle that causes zero friction on the palms while linking * is made from high-grade, durable 6061 T6 aluminum * key components are parkerized * easily transportable at just 18 pounds. * comes with four corner holes for screwing into a board or table. * 100% designed, machined and assembled in the USA FOR PURCHASES: We accept credit card (Visa, MasterCard, AMEX, Discover); PayPal, certified checks, money orders. 1) Call us at 303-819-9847 if using credit card. There is a 4% surcharge for credit card purchases; or 2) You can also send payment via PayPal: https://paypal.me/TMoviel; or 3) Certified Checks/Money Orders can be made out to: Kendall Ordnance, PO Box 4115, Copley, OH 44321 4) Shipping is: $25, via FedEx Ground, but we will accommodate other requests. We are open 9am-6pm EST Mon-Sat.

I have a FN made M249 SAW front end (saw cut) approximately 2 inches behind the trunion. Its not bent. trunion is intact. $525.00 Del. USPS MO preferred, Check OK but will need to clear. CC adds 4% as well as PAYPAl. Venmo is another option and it is free.

Here is a list of M240 and M249 Parts and accessories, please call if any questions M145 Military issue MG Optic Elcan for M249 or M240B and M249S as new with Killflash and camo Pouch (just what the new Semi M249S owners need on the top rail so it doesn't look naked!) 725.00 Rare Israeli Military issue 200 rnd 5.56 belt drum for the M249 with IDF Markings, in new condition with solid metal attaching point, not like the plastic US issue nutsack attackhing point, only a small number available, see pic below! will work on Shrike as is or HK23E with MM 's mounting adapter 50.00 ea. all sold M249 Charging handle 125..00 M249 gas tube assembly, new 200.00 M249 top cover, new stripped Non-Rail 200.00 M249 Top cover retaining cross pin assembly 4 parts 50.00 M249 Top cover parts set with all parts except Fed pawls and rear sight 200.00 MK-46/M249 Picitinney Rail top cover, 1 only stripped 285.00 M249 rail top cover complete 540.00 MK-46 Chrome feed arm new in wrap upgrade for M249/SAW 75.00 M249 Para collapsible stock, new condition with new Buffer assembly 150.00 M249 Short Para barrel complete exc. 275.00.00 M249 standard Bipod, new 85.00 MK46 Improved Bipod,, newest version of 249 Bipod 125.00 M249 Slide Bolt Carrier assembly complete new M249 rear sight leaf assembly complete 40.00 M249 New condition Military issue Camo spare barrel carrier bag with built in heat pad for Hot barrel, and pockets for all the 249 Gear, with sling 75.00 M249 complete bolt with extractor M249 US GI issue 100 rnd nutsacks, exc. 30.00 or new 40.00 with starter tab M249/MK46 Lightweight 5 position stock with interchangeable tall and short cheek rsts new 300.00 M249 Barrel change latch assembly 100.00 Top cover hinge pin set, 4 parts 65.00 M249 Extractor replacement kit 3 part set in package 65.00 M249 Ejector arm set 3 parts 65.00 M249 Recoil spring for 249 40.00 M249 Recoil Buffer spring drive rod 249 15.00 M249 Top cover repair parts kit 249 150.00 M249 Firing Pin and spring 45.00 M249 Padded issue sling with QD Attachments 35.00 M240B and M240L parts and accessories M240L Rare Short CQB Barrel new in wrap complete with Factory Vortex flash hider 600.00 M240L lightweight Barrel , standard long exc. complete 700.00 M240B heavy barrel 550.00 (1 only) Top cover, Left feed ,Stripped with rail optic mount, new 200 Complete Top cover with Optic rail except for rear latches, (Add your own take-offs) or I should have some in soon, 525.00 Feed tray new, for M13 link disintegrating 125.00 Rare Right side feed, Make that twin Mount! complete ) 655.00 Right Feed tray, mint 225 Bipod mint, complete, 175.00 Buttstock, exc., Hydraulic, complete new type fixed 150.00 Buttstock Newest type COLLAPSIBLE L version new in wrap 475 Op-Rod complete with piston, firing pin , Bolt group, ready to use all in new condition 550.00 recoil spring group complete 65.00 new in wrap Trigger group, complete in new condition 225.00 Trigger group retaining pin 40.00 Top cover retaining pin 40.00 Fitring pin, new 50.00 Ejector assembly new, 3 parts 50.00 Extractor assembly new, 3 parts 75.00 Helicopter door gunner or vehicle Spade grip 550.00 Combo tool for Bolt and cleaning gas system, new in package 45.00 Sight adjustment tool complete 45.00 Front Rail handguard complete exc. 100.00 Sling, Padded with QD Hook set new 35.00 75 rnd Assault Drum, camo, new in wrap 75.00 M203 M203 Short handguard, with sight mounted rare 75.00 M203 standard handguard with sight mounted 50.00 M203 KAC Quick Detach Bracket for launcher easy on off mew in wrap 135.00 M203 Sight for carry handle, new in wrap 30.00 M203 KAC Front rail sight complete as new 40..00 M203 Firing pin, new 45.00 M203 Double spring FP pusher for Firing pin 35.00 CONTACT DIRECT ONLY GPrue8@aol.com or 828-773-1938 Greg Paypal OK or M.O. Alpine Military Concepts 828-773-1938 GPrue8@aol.com is best to reach me and text to the above number to reserve items,

I have 2 colt uppers that are unfired take off's. They are marked "C AF", and have T marks and m4 feed ramps. Some signs of wear on threads from taking the barrel nut off and and on the inside were bcg was. Nothing major. $155 shipped each. I can send pictures, just email me. I will accept usps money order for payment. Email is best way to get a hold of me, rtonking250@yahoo.com Thank you Ryan.

M249, ARES Shrike and FN Minimi (or any other gun using M27 disintegrating metal links) owners now can easily and reliably link and delink .223 and 5.56 ammo belts. Are you tired of linking belts by hand or have tried other linkers that don't work very well? This one works! Kendall Ordnance's new linker/delinker loads rounds perfectly every time and can be done with one hand. Do you have ammo belts that need to be delinked? Slide the lever forward, press the handle, and the rounds quickly extract. There is no need to change plates. This easy to use M27 linker / delinker: * holds 25 rounds * has extra space for a starter tab when using a nut sack * has a unique, rotary handle that causes zero friction on the palms while linking * is made from high-grade, durable 6061 T6 aluminum * key components are 1095 heat-treated * cartridge guides are heat-treated spring steel * easily transportable at just 15 pounds. * comes with four corner holes for screwing into a board or table. * 100% designed, machined and assembled in the USA Replacement parts are available for the cartridge guides and pusher. It is also available for M13 links (.308 / 7.62x51mm) FOR PURCHASES: $549 + shipping. All questions/orders can be sent to kendallordnancellc@gmail.com

Updated Here is the list of very hard to find spare parts for your FN M249S M249 or M240 MAG-58 All original NOT Aftermarket like others sell! M145 MG Optic Elcan for M249 or M240B as new with Killflash and camo Pouch 675.00 RARE M192 Lightweight tripod for M249S or M240B/L MK46 charging handle , skeletonized, new 120.00 M249 Charging handle complete new, 100.00 MK-46/M249 New type Rail optic Top Belt feed cover complete 525.00 M203 Rail mount Sight , KAC Mfg, new 40.00 M203 QD Mount to take off and add Launcher easily, new in package 150.00 MK-46/M249 Picitinney Rail top cover, 1 only new stripped 265.00 M249 Collapsible stock , new in package 150.00 M249 Collapsible stock exc. 110.00 M240H Complete Spade Grip and tigger group to make Door gun or Top Vehicle Mount configuraton 850.00 see pic MK-46 Chrome feed arm new in wrap upgrade for M249/SAW 75.00 M249 Front Handguard KAC TrI-Rail new 150.00 M249 Short Para barrel exc. complete 265.00 M249 Short Para Barrel new in wrap 300.00 M249 Long standard barrel exc. 275.00 Like New 225.00 M249 Gas tube assembly , new 225.00 MK46/M249 upgrade Improved adjustable Bipod,, newest version of 249 Bipod 175.00 see pic M249 Bipod, new 100.00 M240/M249 Camo spare barrel carrying bag with heat pads, pockets for gear, 75.00 M249/M240 padded sling with QD Clips 35.00 M249 BULLDOG Coyote Heavy duty combat sling , new 50.00 M249 Combination Tool Essential!! 40.00 M249 Barrel Top Heat shield new 75.00 M249 exc. heat shield 60.00 M249 Nutsack adapter, fits in magwell to realign higher up for better feeding. new, 75.00 M240 Complete stock , Hydraulic exc. 140.00 M240 Complete stock, Hydraulic as new 200.00 M240 Heat shield new 75.00 M240 Standard Long barrel Complete exc. 675.00 see pic M249 Heat shield exc condition 60.00 M240 Gas regulator and collar new set 75.00 M240 bipod new or as new 135.00 M240 top cover internal set complete 225.00 M240 Front rail handguard complete 100.00 M249 rear sight leaf assembly complete 40.00 M240 Top Barrel Heat shields new 75.00 M249 Short para barrel exc. condition complete 250.00 M240 Left side rail optic top belt feed cover complete , new 425.00 M240 Right side Belt Feed top cover complete all new 525.00 see pic M240 RARE Right hand feed top cover parts set complete for 240 new 325.00 M240 RARE Right hand feed tray 240 125.00 M240 Right feed side pawl set Rare 85.00 M240 Complete Pistol grip group 200.00 240 Trigger group sear ,new 45.00 M240 Right side feed arm Rare 85.00 M240 Right feed depressors set 75.00 M240 Left feed top cover complete with Optic rail all new 240 475.00 M240 Left feed tray for 240 new 125.00 M240L Short Barrel new in wrap with Vortex Factory flash hider Complete (SUPER RARE) 800.00 M240L Collapsible stock complete new 425.00 M240 Ejector set 65.00 M240/M249 Tripod Pintle for M122 or 1919 type mounts 75.00 M240/249 tripod T&E new in wrap with adapter 150.00 M240 Bolt new complete 225.00 M240 Bolt complete with Op-Rod all new, with Firing Pin ready to install in gun 400.00 M249 complete bolt new with extractor 165.00 M249 Slide Carrier for Bolt/Op-Rod, new with roller, 165.00 M249 100 rnd nutsacks, exc. 25.00 new 32.00 with starter tab M249 200 rnd nutsack exc. 36.00 M249 Extractor replacement kit 2 part arm and spring set in package 50.00 M249 Barrel change lever complete 100.00 M249 Recoil spring for 249 40.00 M249 Recoil Buffer spring drive rod 249 100.00 M240 Recoil spring rod group complete for 240 50.00 M249 Top cover repair parts kit 249 150.00 M240 Top Cover repair kit 240 150. M240 Firing Pin , new 50.00 M249 Firing Pin and spring 35.00 If you don't see what you need just ask, I may have it. Call 828-773-1938 or text and Email direct is best to GPrue8@aol.com

Here is a list of the current M240/MAG-58 and M249 and MK-46/MK-48 parts we have available all in New condition unless specified! Here is what I have for you; M145 MG Optic Elcan for M249 or M240B as new with Killflash and camo Pouch 650.00 MK-46 rail handguard very rare 3 rail for top of barrel, SOCCOM Contract only new 125.00 MK48 feed tray very rare 7.62 new in wrap, Part of 5.56 to 7.62 conversion kit, 375.00 MK-46/M249 New type feed tray with belt holding pawls 175.00 MK-46/M249 Picitinney Rail top cover, 1 only stripped 285.00 MK-46 Chrome feed arm new in wrap upgrade for M249/SAW 75.00 M240 Heat shield new in the box 75.00 M240 Gas regulator and collar new set 75.00 M240 bipod new or as new 135.00 M240 top cover internal set complete 225.00 M249 Tri-Rail KAC Hand guard new 85.00 M249 rear sight leaf assembly complete 40.00 M240 Top Barrel Heat shields new 75.00 M249 Short para barrel as new complete 225.00 M240 RARE Right hand feed top cover parts set complete for 240 new 325.00 M240 RARE Right hand feed tray 240 125.00 M240 Right feed side pawl set Rare 85.00 M240 Right side feed arm Rare 85.00 M240 Right feed depressors set 75.00 M240 Left feed top cover complete with Optic rail all new 240 475.00 M240 Left feed tray for 240 new 125.00 M240 Ejector set 65.00 M240/M249 Tripod Pintle for M122 or 1919 type mounts 75.00 M240 Bolt new 225.00 M249 complete bolt with extractor 165.00 M249 Extractor replacement kit 3 part set in package 50.00 M249 Recoil spring for 249 40.00 M249 Recoil Buffer spring drive rod 249 100.00 M240 Recoil spring rod group complete for 240 50.00 M249 Top cover repair parts kit 249 150.00 M240 Top Cover repair kit 240 150. M240 Firing Pin , new 50.00 M249 Firing Pin and spring 35.00 M249 Complete Trigger group all new 249 225.00 M240b 100 rnd Belt mag adapter for M60 Bandoleer 30.00 M249 Charging handle for 249 new 100.00 M240 Charging handle for 240 new 100.00 M249 New feed tray for 249 100.00 M240 Ejector set,3 parts new 65.00 M249 Trigger group new sear 35.00 M240 Trigger group new sear 40.00 M249 Combo Tool new 25.00 M240 Combo tool does it all.Extractor changing, carbon cleaning etc.35.00 M240 Sight adjustment tool 35.00 M240 Belt drum attaches to side, camo , new 75,00 M249 Blank adapter new M249 25.00 M240 Blank adapter new M240 25.00 M240/249 Padded Sling with QD Hooks 35.00 M240/249 Spare barrel bag new, with built in heat pad and many pockets for the tools and accessories 75.00 M240 Ejection port cover and pin, new 40.00 M240b new issue Buttstock complete used exc. Hydraulic version 150.00 M249 Fixed Hydraulic Buffer stock exc. 150.00 M249 Hydraulic Buffer Stock new 150.00 M249 Ejection port cover with pin 40.00 M249 Magazine side door and pin 50.00 M249 Charging handle stop 30.00 M249 Takedown pin Bottom 25.00 M249 Large Takedown pin Top 35.00 M240 Top Cover Hinge pin, new type 45.00 M249 Top cover hinge pin 3 part set 50.00 M240 Belt feed pawl set, new complete 75.00 (Must have spare) M249 3 rail Picitinney KAC Handguard new 85.00 M249 long chrome feed arm for top cover 75.00 M240 rear sight 60.00 M240 Barrel change assembly lock set 65.00 M240 trigger group pin 45.00 M249 Bolt complete with extractor all new 165.00 M249 Bolt carrier slide complete with Roller 165.00 M240 Flash Hider, new 50.00 M249 Voretex newest type 50.00 M240 Voretex newest type 60.00 M249 Charging handle door for top cover 15.00 M249 Feed depressor pawls set 75.00(with springs and pin) Looking for parts for Cash or trade for a friends MM-23E/HK-23E/HK11e/HK13e Barrels, parts, HK11/13e mag well, ammo boxes,barrel carriers, Bolt groups, what ever you may have, Also for a Czech Skorpian VZ-61 parts Kit, Mags, accessories for his Post sample, HK-MP5 or HK33 Burst 4 position trigger groups, Swedish K Parts and accessories, SIG 551 original scope mount and lower trigger group, Pics of what you have and price. please See our Ad for M2HB Parts on Sturm too!! This will give you a great spare parts for all your potential needs and fun. will figure shipping as for what all you want Paypal to this email as a Gift or add 3% or Check to me at : 828-773-1938 Aline Military Concepts gprue8@aol.com Greg

I have for sale a NIB FNH Military Collector Series M249S belt fed 5.56. This is the standard edition which includes the bipod, 200 links, one belt box, and one magazine. This item is unfired and ready to ship to your FFL. I didn't post pictures since the item is new, but I'd be happy to send you any at your request. Feel free to contact me with any questions. I will cover shipping costs to your FFL. I accept all traditional payment methods. All funds must clear before gun is shipped.

WTS MK46 Semi-Auto Belt-Fed I currently have one newly manufactured belt-fed rifle, model MGA MK46, ready for sale and more in production now. So delivery times will range from immediate to a few weeks at most. Unlike the FN semi-auto, our Patent-Protects SAWs are more modern, have been in production for many years, and are built as HK Host guns. Hence, registered sears and registered packs will work with these guns (where allowed by law, of course, and utilizing our non-NFA full auto operating groups). All models of MGA belt-fed semi-auto rifles are actually based on our military line and, thus, use ALL standard M249-style parts such as top covers, quick change barrels, etc. These Semi-Auto belt-fed rifles combine the military-style M249/Mk46 receiver with an H&K trigger pack. The internals are redesigned from open-bolt, full-auto, to operate as a closed-bolt, semi-auto using a H&K hammer and H&K pack. ATF approval was received May 2009 and we have been producing these PATENT PROTECTED rifles since January 2010. All of our rifles are multi-caliber capable; we currently offer caliber conversion kits for: 300 Blackout, 260 Remington, 7.62x51mm, and 6.8mm SPC. Since our rifles use H&K trigger packs, they can be used as an H&K Host Gun with a Registered Sear or Registered Trigger pack (where allowed by law.) Operating groups and trigger housings for full-auto use are non-NFA items and are available on our website. www.machinegunarmory.com This gun is shipped with our newest PATENT-PENDING semi-auto operating group (called: G3.SA Mk4) which uses standard Heckler & Koch® G3-style trigger packs. The new operating group also uses standard Heckler & Koch® hammers, not the old fashioned (and less reliable) custom-made long hammers. These gun are available NOW. Base Price is $7850 call (801) 839-4683