Search the Community

Looking to buy an original Marlin Rockwell 1918 BAR barrel.

Lots of BAR belts for sale to thin out the collection: WWI Belts: Long 10/11 1918 marked WWI Gunners belt, in unissued condtion. Some wear on the butt cup and some rust stains on the left rear pocked but overall a very nice belt $165 http://www.wwiibarman.com/collections/belts/products/wwi-gunners-belt 2nd assistant gunners belt, Marked Long 11-18. Beautiful unissued condition $250 http://www.wwiibarman.com/collections/belts/products/2nd-assistant-gunners-belt Issued WWI P.B. & Co 6/9 1918 2nd assistant gunners belt. Rust/blood stains on bottom of one pouch, I'd rate at 65% condition, see photos on link; Has unit badge! $165 http://www.wwiibarman.com/collections/belts/products/wwi-2nd-assistant-gunners-belt Issued WWI USMC 2nd assistant gunners belt with 4 BAR pouches and 4 M1903 clip pouches. Unmarked, this is the USMC Version of the hardest variation of all BAR belts. Used in good shape, some wear, see photos on link: $285 http://www.wwiibarman.com/collections/belts/products/wwi-usmc-2nd-assistant-gunners-belt 3rd assistant Riflemans belt, deep blue, just like a navy landing party would have worn. All WWI pattern (large buckles and early belt size adjustments). Name written on left inside (Baples?) and in 85% + condtion. Perfect for your Sand Pebbles tribute! $350 http://www.wwiibarman.com/collections/belts/products/navy-landing-party-riflemans-belt Unissued USMC M1918 Gunners belt, round taped flaps. You won't fine a nicer one! $235 http://www.wwiibarman.com/collections/belts/products/usmc-wwi-gunners-belt-unissued Mint unissued left side WWI Bandoleer. Marked P,B, & Co 7-1918. Rubber stamped ORD 22 and 79 cents on front. $115 http://www.wwiibarman.com/collections/belts/products/wwi-bandoleer-left-side-1 NOS packaged bandoleer, unfortunately it's been opened. Bandoleer is dated 7-18, packaging is dated 3/7/47 $165 http://www.wwiibarman.com/collections/belts/products/nos-bandoleer WWI USMC Left side bandoleer marked Long 5-18. Mint and un-issued but with small hole in front $99 http://www.wwiibarman.com/collections/belts/products/usmc-bandoleer-left-side WWI USMC right side Bandoleer with rounded flaps indicating Marine issue. Marked Long 4-18. Mint and unissued but there is a tear in one of the flap and the strap, see photo on link: $80 http://www.wwiibarman.com/collections/belts/products/usmc-bandoleer-right-side WWII Belts: PB&C khaki belt marked 9-18, upgraded to M1937 belt standards with the smaller buckles and later adjustable belt system. Rubber stamped M6190 on left side. Belt is in 70% condtion, one flap has been replaced, one of the pouches has a corner that has worn through and missing the drain hole grommet. A very interesting early WWII upgrade $115 http://www.wwiibarman.com/collections/belts/products/modified-2nd-assistant-riflemans-belt Unissued M1937 belt marked Boyt 1942. Flaps are slightly darker material. A rare belt in great shape! $195 http://www.wwiibarman.com/collections/belts/products/two-toned-m1937-belt left half of a M1937 modified gunners belt in fair conditon. All clasps work and no rips. This has been modified to the M1937 standard and has (paint? Blood?) splatter on the fabric $38 http://www.wwiibarman.com/collections/belts/products/wwi-belt-modified-to-m1937-specs-left-side-only Post WWII Left half of BAR belt: Post war dark olive 1/2 belt. Three pouches, repair on the front male clasp. $22 http://www.wwiibarman.com/collections/belts/products/left-half-of-a-m1937-belt M1937 Gunners belt, marked Concord 1951. This one is dark green and has no rips although one flap is frayed. Perfectly serviceable used mag belt $68 http://www.wwiibarman.com/collections/belts/products/m1937-2nd-assistant-riflemans-belt-2 Rare, hard to find in the US, a M1937 pattern gunners belt marked ROK (Republic of Korea). Used but in good condition $195 http://www.wwiibarman.com/collections/belts/products/rok-south-korean-m1937-belt 1970's US Belt; This is sort of a mystery belt. I've never found documentation of it but have seen this belt in the Tales of the Gun show in the Anniston Army Depot so this is a US issued belt. It's made of cotton and nylon and has a M1956 style pistol belt with three eyelets. It still holds 12 mags just like a M1937 belt $80 http://www.wwiibarman.com/collections/belts/products/latest-version-gunners-belt-1980s Thanks for looking all, and thanks to Dave and Buddy!

Greetings all, George in NC here, I'm thinning out the BAR collection of over 20 years. I have all sorts of things from the mundane everyday item to rare one-ofs. Lots of spares to keep your BAR running, some NOS parts, accessories. Basically everything but the receiver (and I'm selling those too but cut up in little chunks!) Brouse around at http://www.WWIIBARMAN.com and enter code Sturm for free shipping on any order. I'm motivated to sell and once it's gone it's gone. This is 20 years of accumulated collecting that I'm getting rid of. Thanks Buddy and David for keeping the site going!

Winchester 1918 BAR in 99%++ condition from the Winchester museum. Firearm is immaculate inside and out. This is as close to an NIB 1918 BAR you will find. It appears to be unfired. This is a collector grade BAR and you will not find a nicer one than this. Transferable firearm form 3. All NFA rules apply! I have additional photos at http://photos.longrangeind.com/GalleryThumbnails.aspx?gallery=4774451/ Any questions please email. $45,000 +shipping/Ins. Regards, Mike Piazza Long Range Industries 602.799.4053 mikep@longrangeind.com

Large lot of USGI BAR parts for sale including: Cylinder Gauge x 1 BAR Gas Tube Slide Assembly x 1 Gas Tube with gas tube regulator x 1 Flash Hider x 1 Front sight protector x 1 Forearm x 1 Carry Handle x1 Late War bipod x 1 Early war bipod x1 Early War Bakelite stock with monopod cutout (stripped )x 1 Late War Stock complete with buttplate and swivel ass. x 1 Stock retaining sleeve x 1 US WWI Model BAR Combination Wrench x1 BAR Combination tool, Reamer x 2 Brush, Set, BAR x 1 BAR Buffer Head x 3 BAR Buffer Assembly Cup x 12 BAR Buffer Assembly Actuator x 2 BAR Buffer Actuator Spring x 3 BAR Sear Release x 3 BAR Buffer Key x 3 BAR Buffer Assembly Cone x 12 $1000 shipped http:// http://

All sorts of BAR parts for sale, I've been collecting for 20 years, and have started thinning out the collection. Barrels, gas tubes, regulators, demills, manuals, belts, accessories, bolts, trigger groups, ect. If you can think of it I probably have it or have had it. Every part on the site is THE part, individually graded and photographed. To celebrate the birthday of the United States, now through July 4th, all orders 15% off, just enter code USA on checkout www.wwiibarman.com Thanks Buddy and Dave! George \

Ad retracted.

This is my first WTS post on this forum and am having trouble (he double l) with posting pictures. I have a Group Industries BAR for sale at $24,250. In great condition and functions flawlessly. I have attached as many pictures as possible at my level. If you have any questions contact me at 325-762-four zero eight nine or dann@ NOSPAMcotterneff.com between 5:00am-7:00pm CST. Also any suggestions or comments on how to improve future WTS post are appreciated.

Selling one Colt Monitor Parts set, demilled by torch cutting and missing the front half of the receiver. It appears like new in all other regards. I am unsure of it's history or serial number, I was told it came out of a widows closet post 86' and was torch cut on site. Most experts agree there were aprox 125-135 Monitors built and 90 went to the FBI. That leaves at most 45 out there in the wild. This is perhaps the rarest and most sought after production machine gun ever $12,500 http://www.wwiibarman.com/products/colt-monitor-parts-kit I am liquidating most of my personal BAR collections, look around the WWIIBARMAN site for more BAR goodies

Looking to sell my R75 BAR on an original WWI Marlin Rockwell receiver. The gun is registered on a Form 4, fully transferable. Comes with (3) 20 round mags. Asking 29.9 K, you pay shipping and all transfer taxes. 50/50 Payments considered Also have many available spare parts including sling, pouches and mags. Email dlregister1@gmail.com for details and photos. A really nice gun!!

Looking for demilled receiver pieces for the BAR. Does not have to be all there. Also looking for a pair of BAR bolt rails. Direct Email: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email. Thanks!

I have available on form 3 a very nice pre-86 dealer sample Colt 1918 BAR machine-gun in 30-06. It was rebuilt as an A2 model sometime during WWII. It has a 3-43 dated IBM barrel that is in very-good condition with strong and bright rifling. Comes complete with bipod and magazine. I will include the carry handle if I can find it. I have shot less than 350 rounds through this gun and it runs 100%. This gun is only for sale to FFL/SOT dealers only. Please e-mail with any questions. I am asking $12,000. Regards, David Skinner skinnermfg@yahoo.com

In stock in our store in McDonough, GA is a BEAUTIFUL Group Ind. M1918A2 BAR. This beautiful M1918A2 BAR is in impecable condition. Not pictured but included are a carry handle, bipod and one magazine. This is an execellent machinegun. Wood foregrip and black stock. The gun appears to me to be unfired. I hesitate to say that because I cannot provide proof, but it is incredibly clean and shows no typical signs of use around the chamber and ejection port. IF it has been fired, it wasn't much. The previous owner is deceased and therefore I am unable to ask about its firing schedule. In stock, ready to Form 3 to your dealer or Form 4 to a GA resident. Price is $30,000.00 cash or check. GA residents add 7% sales tax. More picture available here - M1918A2 at QRF Jake Hinton Quiet Riot Firearms 678-884-6700 jake@quietriotfirearms.com

Looking for a demilled BAR receiver. Email: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email. Thanks!

Here is an action cover that also serves as a snow shoe for the bipod of my Swedish Kulsprutegevar m/37 machine gun. Sounds like some of you may need them for your guns according the the weather reports.