Jump to content

Ordnance.com

Airman
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Ordnance.com

  1. ***All our other 240's have been sold.....this is the last one that we have available*** Post-sample M240B belt-fed machine gun, manufactured by Ohio Ordnance Works. The gun runs perfectly, and has only been fired 800 rounds since purchased new from OOW in 2011. This is a post-sample, so LE demo letter is required for ATF to approve the Form 3 transfer. Price is $9950+shipping via UPS Ground. Buying this gun new costs $13,000. For payment, we accept Visa, MasterCard, Discover, cashier's checks, and regular checks. For inquiries, or for purchase, email us at info@ordnance.com or call our office at 731-407-4510.
  2. Post-sample M240G belt-fed machine gun, manufactured by Ohio Ordnance Works. The gun runs perfectly, and has only been fired 600 rounds since purchased new from OOW in 2011. This is a post-sample, so LE demo letter is required for ATF to approve the Form 3 transfer. Price is $9950+shipping via UPS Ground. For payment, we accept Visa, MasterCard, Discover, cashier's checks, and regular checks (held for clearance). Contact us directly with questions, or if you would like to purchase. Our office number is 731-407-4510, and our email is info@ordnance.com
  3. If you have any questions, or would like to purchase, you will need to contact us directly by email: info@ordnance.com or by phone at 731-407-4510. We have two different types of 60mm mortar ammunition for sale: 1.) 60mm M69 mortar training/practice rounds, for use in the 60mm M2, M19, and M224 mortars. We offer these rounds for sale individually for $100/each, or for a can of 8 rounds for $680, which reduces the price individually to $85/each. The full can of 8 rounds weighs just under 50 pounds. The M2 fin assemblies have been internally machined, so that they will accept a standard 20ga shotgun blank lifting charge (not included). These rounds are reloadable and reusable, and can be fired dozens of times each (provided they aren't lost or the fins are not damaged). These rounds are a great inert ordnance collectible, but can also be fired in your NFA registered mortar. Click on the link below to see a video of us firing these M69 training rounds. 2.) 60mm TRUMP ammunition, for use in the M2, M19, and M224 mortars. These 60mm rounds can also be fired in just about any other 60mm mortar out there. The 60mm TRUMP round is a Training, Re-Usable, Mortar Projectile (TRUMP) that is fired from the 60mm mortar and "detonates" down-range upon impact. Click on the link below for a video demonstration. The removable stainless steel nose fuze accepts a 20-ga shotgun blank that contains less than 109 grains of black powder (not included). This charge is initiated upon impact, and gives off a cloud of smoke and an audible report that can be heard up to a mile away! The removable tail fin assembly also accepts a 20ga blank, which is used to launch the projectile from the barrel. We have the two different types of 20ga blanks for sale separately. The round is extremely durable and can be fired dozens and dozens of times, reloaded, and re-fired. How many times the round can be reloaded and re-used, will ultimately depend on the terrain that the round is impacting. We are located in western Tennessee, and we were able to fire/reload/re-fire the same round 150 times, with 100% reliability and no damage (only cosmetic scrapes). We offer these rounds individually for $350/each, or in a can of 8 rounds for $2400 ($300/ea). The Firearms Technology Branch of the BATFE have inspected these rounds, and consider them to be destructive device ammunition, but the rounds themselves are not classified as a destructive device. The blanks used inside the round must contain 109 grains of powder, or less. If the powder quantity exceeds that amount, the round would be considered a destructive device and would be a violation of federal law. TRUMP ammunition is available for the 60mm and the 81/82mm mortars. This ammunition is a restricted sale item, and requires two pieces of documentation to purchase: 1) A BATFE approved Form 1 or Form 4 in whatever caliber is being purchased (60 or 81/82mm), and 2) A copy of a valid state-issued photo identification, such as a driver's license. It is the buyer's responsibility to ascertain the legality of possession within his/her own state prior to purchase. The ammunition must be shipped to the address on the Form 1, Form 4, or the buyer's state-issued ID....no exceptions. This ammunition is also available to FFL/SOT holders. Must submit copy of license & SOT prior to shipment. This ammo is a blast!
  4. If you have any questions, or would like to purchase, you will need to contact us directly by email: info@ordnance.com or by phone at 731-407-4510. M2 60mm Mortar Package includes the following: 1.) Wooden & steel transport/storage crate 2.) Base plate assembly 3.) M5 mount & bipod assembly 4.) Cup/receiver 5.) Tube/barrel 6.) Firing pin 7.) M14 sight carrying case 8.) M4 sight assembly 9.) M37 instrument light for M4 sight 10.) M308 muzzle cover & carrying strap 11.) C1 ammunition wrench 12.) M10 aiming stake 13.) M41 instrument light for M10 stake 14.) M2 cleaning staff 15.) Copy of FM-23-85 field manual Overall, the kit is in museum quality condition. The M5 mount/bipod assembly was completely disassembled, bead-blasted, polished, painted, lubricated, new leather handle and strap fabricated/installed, and reassembled. The shock absorbers were also gone through to make sure they are functioning properly. All mechanical aspects of the mount are functioning perfectly: elevating/depressing, traversing, cross-leveler, and locking nut. All components of this M2 mortar are original USGI WWII vintage, with the exception of the cup, tube, and firing pin, which are newly manufactured. No ammunition is included in this package, but we do have 60mm M69 rounds, and 60mm TRUMP rounds for sale that we will be posting. Once the purchase on the kit has been made, everything but the cup/receiver will be shipped to you via freight. We will supply you with the necessary information for you to fill out and submit your Form 1 to the BATFE for approval to make a destructive device. Once the BATFE has approved your Form 1, you will fax/email us a copy of the approved form, and we will ship the cup to an FFL dealer of your choosing, within your state. You will then go to your dealer, fill out a standard 4473 to have the cup/receiver transferred to you, then bring your cup home and screw it on your tube.....your mortar is now complete. If an FFL/SOT dealer would like to buy the kit as a destructive device, and have it transferred directly to them, we can do a Form 2 on it, then transfer it to you via Form 3 or Form 4. All transfer/registration taxes are the buyer's responsibility. Price is $6000+shipping. Click on the following YouTube link to see a video of us firing the M2 60mm mortar:
×
×
  • Create New...