Jump to content

CincyKen

Corporal
  • Posts

    41
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by CincyKen

  1. This is an all steel DIAS, runs perfect for the very little I have shot with it. You can see that there is a small amount of wear on the finish. John R. Stemple was the maker of this sear. I am asking to get $55K for this sear. This is on a Form 3 in my inventory ready for eFile. My eFiles go through in about a week. I have been a Class 3 dealer since 1970. Thanks for looking, Ken. wedgewood48@gmail.com
  2. All are semi auto. All excellent condition. ( no boxes) It a SIG 540 in .243 cal not a 554. All are preban early guns.
  3. It was brought to my attention that this is the same barrel that I sold on gunbroker. If you look at this barrel you will notice that the serial number is 1720A. The other barrel 22989A I sold on gunbroker. Just decided to give Dave the business on this one.
  4. This barrel is for the MG15 water-cooled gun. I was told that the added on front part can be removed is you want to use it in a air-cooled gun. The barrel is in excellent condition inside and out. The cleaning stand is very nice. Shipping to the lower 48 will be $22. Price: $425 Thanks for looking Ken
  5. Hard to find set of 4 Bren Gun drums with the loader and the adapter for the gun. The drums are in great condition and seem to work just like they should . The drums could use a good cleaning because of the dried cosmoline on the outside of them. One of the drums is painted desert tan so you know that it was used most likely in North Africa in WWII. The wooden storage chest is in very good condition with its original paint. The reloading items are all in working order. These are very hard to find. Shipping will be actual cost. Price is $4250. for everything in the photos. Thanks for looking.. Ken
  6. Gentlemen, I am in need of a split pin that holds the feed tray in the 1914 Hotchkiss. If you have one that you don't need I will gladly purchase it. wedgewood48@gmail.com Thank You! Ken 513-543-0868
  7. Very nice / complete Browning tripod for your 1917A1. Very nice condition. Everything seems to work just fine. Shipping will be determined after I know your location. Price is $2500. Thanks for looking.... Ken
  8. Lightly used, excellent condition tripod for the British Bren gun. Everything works like it should. Both Anti Aircraft legs are contained in the rear legs. These are getting hard to find especially in this condition. $1650 plus shipping that will be determined after the sale. Payment can be by bank check or discreet PayPal. Thanks for looking Ken
  9. Gentlemen, Anyone out there have a handful of the Breda 8 x 59 cartridges that I can purchase? Notice that the caliber I need is 8x59 and NOT 8x57. I need them for measuring and will not be shooting them. Thanks for your help ! Ken wedgewood48@gmail.com
  10. This is a very nice serviceable drum. Totally original, very slight pitting on the front of the drum, see picture. Ready to load and use! $375 obo. $15 shipping to the lower 48. Preferred payment method is money order and PayPal wedgewood48@gmail.com
  11. This an excellent belt loader in its original can. It works perfectly. A quick way to load your belts. As a bonus I will throw in a handful of belts to go along. $700 obo. $22 shipping to the lower 48. Preferred payment method is money order or PayPal wedgewood48@gmail.com
  12. What we have here is a nice tool kit. Some of the punches I have been told were replacements? $2900 plus $20 shipping to the lower 48. Preferred payment method are money order and PayPal. wedgewood48@gmail.com
  13. Spade grips are in great condition, complete and everything works as it should. $850 plus $15 shipping to the lower 48. The mounting adapter for the 08/15 is one that was made years ago. With this adapter you can mount your gun on various ground and A/A mounts. No more laying in the dirt to shoot your gun! $295 plus $15 shipping to the lower 48. Preferred payment method money order or PayPal wedgewood48@gmail.com
  14. Overall excellent condition. Everything is free and works the way it should. It is nicely marked,100% complete and original. $350 obo. Shipping will be $18 to the lower 48. wedgewood48@gmail.com
  15. I have had this kit since 1972. It is complete and 100% matching. Overall in great condition. Unfortunately the outside of the barrel and bolt is pitted. The new owner can take them out. The rest of the kit is really nice. The bore has plenty of life left in it. The bakelite lower is excellent. This is a perfect candidate for a class II mfgr a semi auto or a display piece. Price $3850. Ken wedgewood48@gmail.com
  16. I have for sale a very nice Colt 1915 Vickers in 8mm. This gun is a Pre 86 (keeper) you must have a SOT. to buy it. If you give up your license you can keep it. This weapon was imported by Pedro Bello back in the early 80's. The bolt, feed tray and barrel are all 8mm. You will notice from the photos that it still has the rare Colt plastic grips and the Colt rear sight assembly and flash hider. You can use various belts and I will include 2 with the Vickers. You can change the caliber to US 30-06, Russian 7.62 x 54R with out to much of a problem. I am going to include a very rare like new US 1915 30-06 Vickers barrel. The metal belt is a 250 round Swiss Maxim belt. The inside of this Vickers is like new condition. Also included is a Vickers water can & steam condensing hose. The tripod is a real Colt tripod with I D plate in excellent condition. The left side of the gun has a dent towards the front. This can be taken out without to much trouble. Buyer to pay shipping and insurance or I could have it delivered to Knob creek in October. This gun is on a Form 3 in my inventory and ready to transfer via E File. Price $20k or best offer.
  17. The bottom dollar for now is $7200. Thank You! Ken
  18. Up for sale is a very nice Sten MkII by Charlie Erb in 9mm. Price: $7500 It is in like new condition and comes with a spare butt stock. It is in my inventory on a form 3 ready to "E"File, my file has been taking one to two weeks.
  19. Up for sale a beautiful Argentine Browning in the original 7.65 cal. You can change calibers by changing the barrel, bolt etc. etc. This one was build by Craig Jordan of Tiffany Arms. It will come with the accessories shown in the pictures. The gun and tripod are near flawless. I don't have any of the conversion parts but they are readily available and not expensive. I have a 1000 rounds of non-corrosive 7.65 that will come along with belts. This gun is on a form 3 in my inventory and ready for "E"File. My form 3 transfer are taking about a week to 10 days. The new owner will be responsible for shipping Price is $24,500 OBO
  20. Let me start out by saying this gun has been restored. It is a great shooter and it is a gorgeous example of a 1928 Savage, also let me note this Savage is registered as a Colt. Some early Savage Thompson's were registered as Colt's and I suspect that this is one of them. The parts are original to the gun the way I received them, this gun was never rusted or pitted. I just wanted to make a beautiful example of a 1928 Savage. It is an excellent example and will look great in your collection and shoots flawlessly. All internal parts are original to the gun. It is on a form 3 in my inventory and ready for e-file. $29,500 New owner pays shipping. Ken: wedgewood48@gmail.com
  21. This beautiful Colt M16A1 has been shot, but very little. If you have been looking for a like new factory Colt M16A1 this is the one for you! The weapon is on a form 3 in my inventory, ready to E-file to you. CincyKen in the business for almost 50 years. $29,500 buyer pays shipping. wedgewood48@gmail.com
×
×
  • Create New...