Navgunner

I have multiples, so no worries there. I accept postal money orders or venmo (friends and family). @A Ros it’s a vice block. These are really popular among more common platforms such as the AR 15 but I’ve never seen one for UZI so I made it myself. It mimics a magazine, but since it’s a solid polymer, it’s crush resistant. It’s intended to be inserted into the firearm with a portion extending past the grip so it can be squeezed into a vice which is very helpful for servicing/cleaning the UZI. I made something similar for myself a while back from a 25 round Israeli magazine. To keep the vice from crushing it, I filled up the lower portion with steel shot in epoxy, which worked really well, but was an enormous pain in the butt to make, and I had to destroy a perfectly good magazine in the process which I did not enjoy doing. This polymer one (3d printed) is much better. Another added benefit is that it does not have the ability to be loaded (obviously) which is ideal for safety.

For sale new 3d printed UZI vice block (PLA 100% infill aka solid). $30 shipped to the lower 48 states.

I have no problem perusing another production run of extractors however, I've been told by a couple of others that they intend to make these so I'm electing to yield to them (out of an abundance of respect for the community). If those people don't follow through, then I can pick this back up. -Navgunner

There's only three weeks left until pre-orders close. Please be aware that your deposits are due to me no later than May 1st because that's the date that I'm placing my production order with my manufacturing partner. I will not accept any additional preorders past this date. Please account for the time that it takes the US postal service to deliver mail because I can't provide any allowance for snail mail. Thank you to everyone who's supported and/or participated in this project!! V/R, navgunner

PM sent

I’ve placed my bid!

Perfect! Thank you

@bradhe thank you for the heads up! I can’t find any auction houses that have it (upon initial search). If anyone could post a link that would be fantastic.

Happy Easter! Only 30 days left for preorders (window closes May 1st). Sturm community, I’ve received more orders between this board and UziTalk than I expected which overwhelms me with thanks. I appreciate the support!

Bump please

M39 Swedish Training Ammo on 36 Round Stripper Clips in small blue boxes. This is the round with a 5 mm BB as the projectile. I’m willing to pay $100 plus reasonable shipping per case of 864.

I want to take a moment to thank everyone who's supported this project through pre-sales. I've been pleasantly surprised to see that most of the individuals who initially expressed their interest have already committed to pre-orders via their deposits. For me, this is definitely a labor of love in service to the community that I'm so proud to be a part of. Very Respectfully, Navgunner

Same

I have one of these. Neat idea but poorly executed. Not worth it.

It's official, I'm now taking preorders for domestically manufactured FN FNC bolts!! Please read the original post "update" for details.

I’ll take two cases per our conversation.

https://auctions.morphyauctions.com/_N__HIGHLY_DESIRABLE_AND_EXTREMELY_POPULAR_FLEMING-lot574063.aspx Like @Got Uzi said. Here’s a link to the auction of what appears to be associated with the tag.

That’s my understanding too, but I’d love confirmation

Crude but very effective. Built like a tank.

Yep… I personally have a PHX Arms RR. Also, I’m sure there’s at least one registered receiver that was built on a form one by an individual, but the owner would have to submit a FOIA to figure out more about it.

The factory FN FNC safety trip (auto sear) is different from what S&H arms made for their registered sears. Also, registered receiver guns had an assortment of different geometries too (PHX Arms, Fleming, HardTimes, etc.). All of this factors into where/how the pocket is cut into the lower. Then you’ll need to weld a trip in the bolt carrier assembly and cut it for “timing”. Give me a PM with your contact information and I’ll give you a couple options for sourcing parts

If I make these 760 extractors then I can cut some for the S&W76 the same time (if there’s demand). Right now my focus is the FN FNC bolts. Another member private messaged me who’s definitely got everything that he needs to make a run so I’m waiting to hear back from him before I go too much further with these extractors (I don’t want to step on anybody’s toes). If I don’t hear back from him soon then I plan on proceeding.

Thank you @HFTech! I’ll PM you.

Don, Thank you for sharing! I'd absolutely love to see your example made by Scott Andrey but he, like others recognized that there's a difference between the SW76 and the MK760 extractors. The only one that I'm interested in is the MK760 variant (I believe that's the one with the "L" stamped on it) ... is that the one that you have? V/R, Nav