Fortress

No Letter Auto Sears for sale

Location: TN

9 posts in this topic

I'm giving up my SOT and as such am selling off my post sample items.  What I have left for sale are (15) Glock select fire auto sears and (25) DIAS units.  Everything else has been sold with the exception of a few inventory silencers.  

The DIAS units will work on milspec AR15 lowers.  These will not work on AR10.  You will need to swap out the trigger/hammer/disconnector/selector for standard full auto parts.  This is straight forward as there are simply the two pins (trigger/hammer pin) hold these in place.  Then the DIAS simply drops into the lower.  It may require a slight bit of timing but that's what the set screw is for.

The Glock sear is a direct replacement for the normal back plate on the glock pistol.  This sear will work on any gen 3 or gen 4 glock with the exception of the 42/43.  I haven't tried these on the gen 5 models yet but will probably work.  You will need to make a very small groove on the frame of your pistol.  That is the only modification to the gun.  The modification does not prevent you from removing the sear and putting the standard back plate back on the gun.  So you can put your gun back to normal at any time (but why would you want to as these are a ton of fun to shoot).  I left the sear trip lever a little long so it will need to be timed to fit your specific gun.  To time the trip you simply need to use a hand file (no power tools) and remove a small amount of metal until the gun functions properly.  I have a video on my YouTube channel describing the process (Fortress Firearms).  I didn't go too in depth as YouTube is a public forum.  I can also install and time the sear for you if needed (additional fee applies) after the F3 has been approved.

If you are an 07/02 these units are already registered via form 2 and are available for immediate transfer with NO LAW LETTER needed.  If you are an 01/03 you can purchase these but will need a law letter.  Right now eForms form 3's are running about 2-3 days.  Pricing is as follows:

DIAS = $250 and Glock sear = $350

2 or more and I'll discount unit by $25.  4 or more and I'll discount unit by $50.  You can mix and match to get the quantity numbers. 

If you have any questions or to get the ball rolling you can reach me at TNFortressFirearms@gmail.com.  I have a few payment options.  1)I can send an invoice from QuickBooks, but that adds 3.5% for CC processing.  You can mail a check payable to Fortress Firearms to the address on my FFL.  Or we can do a DISCREET paypal to avoid fees.  My paypal is associated to my personal email address so please mention that if you want to go that route.  

Thank you

Ken Jackson

Fortress Firearms

dias pic 1.JPG

dias pic 2.JPG

glock sear pic 1.JPG

glock sear pic 2.JPG

Edited by Fortress
grammar

Share this post


Link to post
Share on other sites

So 4 DIAS would be total of $800.00 if I understand you correctly???

Share this post


Link to post
Share on other sites
14 minutes ago, amico said:

So 4 DIAS would be total of $800.00 if I understand you correctly???

That is correct. If you would to start the paperwork my email is TNFortressFirearms@gmail.com. I have 7 or 8 DIAS units left I believe. 

Share this post


Link to post
Share on other sites
On 2/8/2018 at 4:10 PM, Fortress said:

I'm giving up my SOT and as such am selling off my post sample items.  What I have left for sale are (15) Glock select fire auto sears and (25) DIAS units.  Everything else has been sold with the exception of a few inventory silencers.  

The DIAS units will work on milspec AR15 lowers.  These will not work on AR10.  You will need to swap out the trigger/hammer/disconnector/selector for standard full auto parts.  This is straight forward as there are simply the two pins (trigger/hammer pin) hold these in place.  Then the DIAS simply drops into the lower.  It may require a slight bit of timing but that's what the set screw is for.

The Glock sear is a direct replacement for the normal back plate on the glock pistol.  This sear will work on any gen 3 or gen 4 glock with the exception of the 42/43.  I haven't tried these on the gen 5 models yet but will probably work.  You will need to make a very small groove on the frame of your pistol.  That is the only modification to the gun.  The modification does not prevent you from removing the sear and putting the standard back plate back on the gun.  So you can put your gun back to normal at any time (but why would you want to as these are a ton of fun to shoot).  I left the sear trip lever a little long so it will need to be timed to fit your specific gun.  To time the trip you simply need to use a hand file (no power tools) and remove a small amount of metal until the gun functions properly.  I have a video on my YouTube channel describing the process (Fortress Firearms).  I didn't go too in depth as YouTube is a public forum.  I can also install and time the sear for you if needed (additional fee applies) after the F3 has been approved.

If you are an 07/02 these units are already registered via form 2 and are available for immediate transfer with NO LAW LETTER needed.  If you are an 01/03 you can purchase these but will need a law letter.  Right now eForms form 3's are running about 2-3 days.  Pricing is as follows:

DIAS = $250 and Glock sear = $350

2 or more and I'll discount unit by $25.  4 or more and I'll discount unit by $50.  You can mix and match to get the quantity numbers. 

If you have any questions or to get the ball rolling you can reach me at TNFortressFirearms@gmail.com.  I have a few payment options.  1)I can send an invoice from QuickBooks, but that adds 3.5% for CC processing.  You can mail a check payable to Fortress Firearms to the address on my FFL.  Or we can do a DISCREET paypal to avoid fees.  My paypal is associated to my personal email address so please mention that if you want to go that route.  

Thank you

Ken Jackson

Fortress Firearms

dias pic 1.JPG

dias pic 2.JPG

glock sear pic 1.JPG

glock sear pic 2.JPG

Do u still have any of these left for sale?

Share this post


Link to post
Share on other sites

I'm interested in one of each. 

Please advise if still available.

shamrockpawn@gmail.com

Share this post


Link to post
Share on other sites

Do u still have any of these if so send me email broughtonfirearmsllc@outlook.com thanks

Share this post


Link to post
Share on other sites

You people listing your emails publicly must love getting scam emails 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now