m4a1sof Posted July 6, 2017 Report Share Posted July 6, 2017 (edited) I took my grip stick apart and now the gun will only fire semi auto. I only took the trigger housing parts out and cleaned them and the housing and put them back. I didn't touch the bolt or receiver, both were the same as before when it worked fine. Works as flawless as before, but now semi-auto only whether I pull the top part of the trigger or the bottom part. Did I put something back wrong? Is the attached photo where the trigger rod should be in relation to the disconnector? If I move it farther back the grip won't align back up with the receiver holes, and I can't move it farther forward because it bottoms out against the trigger. I've looked at pictures, watched YouTube videos, nothing works, this is driving me nuts, please help. Never mind, I had put the catch pin in backwards. Edited July 6, 2017 by m4a1sof I'm an idiot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.