BPinFL Posted December 27, 2016 Report Share Posted December 27, 2016 Have a transferrable cut/welded PPSH 41 that has never run well. I believe the trunnion in installed out of spec. Who is the guru of PPSH's? Thanks for the Boards! Quote Link to comment Share on other sites More sharing options...
Mongo Posted December 27, 2016 Report Share Posted December 27, 2016 I recommend AMAFrank (he post on several boards for NFA) for the work. He took a POS reweld Ppsh41 for me and reworked it into a like new gun that runs great. 1 Quote Link to comment Share on other sites More sharing options...
BPinFL Posted December 28, 2016 Author Report Share Posted December 28, 2016 Hi Mongo, thanks for the reply. Do you have his contact info? Quote Link to comment Share on other sites More sharing options...
Mongo Posted December 28, 2016 Report Share Posted December 28, 2016 amaREMOVETHIS@indy.net Quote Link to comment Share on other sites More sharing options...
BPinFL Posted December 30, 2016 Author Report Share Posted December 30, 2016 Thanks Man, turns out I dont need the Smith. With help from another board I figured out the problem and she runs like a champ. Used a dremel to relieve where the bolt was contacting the ejector. I think the trunnion is set a bit too far forward. Thanks for the Boards! Quote Link to comment Share on other sites More sharing options...
SD_Armory Posted January 11, 2017 Report Share Posted January 11, 2017 Do you mind sharing the link to the board you received the info from? Quote Link to comment Share on other sites More sharing options...
BPinFL Posted January 21, 2017 Author Report Share Posted January 21, 2017 Hi SD: Had a reply on Bowers board about bolt contacting the ejector, I think its gone now, but I relieved the ejector and it worked for awhile. Any way, gun ran for about 50 rounds, then stovepipes and empties falling back into receiver. Now I see a crack where it was welded. Still looking for the right Smith. Quote Link to comment Share on other sites More sharing options...
CavalryDave Posted April 18, 2017 Report Share Posted April 18, 2017 Did you ever find a smith for your PPSh 41? I just got mine back from http://www.mhgunsmithing.com/ Mine is a C&R but it experienced every type jam you can think of; T jam, stovepipe, and would just stop firing. Anyway, Mike Hane fixed it, he said it was a bolt-extractor-ejector problem. Runs great now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.