tanksalot Posted December 22, 2016 Report Share Posted December 22, 2016 I am looking for the necessary parts to convert my belt filler from 3006 to .308. I am not positive, but maybe it is just the pusher that's a little longer? If someone could even just give me some measurments, I will attempt to make my own. I have called several places and can't find one. Any help would be great!! Thanks!! Quote Link to comment Share on other sites More sharing options...
pstidan Posted December 23, 2016 Report Share Posted December 23, 2016 Contact L999here over on 1919A4 dot com. Quote Link to comment Share on other sites More sharing options...
tanksalot Posted December 23, 2016 Author Report Share Posted December 23, 2016 Got it. Thanks! Quote Link to comment Share on other sites More sharing options...
mike todd Posted January 23, 2017 Report Share Posted January 23, 2017 I see you got your conversion , GREAT ! in the future, you might just keep the 308 in the loader and when you want to change back all you need to do is take the cartridge measurement difference, in this case , 12 mm and add a piece of metal to the original pusher. I use super glue as it comes off easy when needed and stays on just fine. if you shoot reloads , its a good idea to use a dermal and route a primer divit in the face. if you do several cals like 54r etc I keep a short pusher (.308) in the loader and add the pieces as needed. cheers mike todd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.