John Anderson

WTS : HK MP5 Regestred Receiver $25k

Location: Lebanon, TN

17 posts in this topic

Posted (edited)

Thank you for all of your interest but I have decided to keep it. John

Edited by John Anderson
Taking it off market

Share this post


Link to post
Share on other sites

Posted (edited)

FYI. I just spoke with John Anderson on the phone. Very nice guy and he understands what he is selling. He is going to be at KCR in April helping to setup the Subgun shoots. John offered to allow anyone, seriously, interested in his MP5 the opportunity to check it out and even shoot it at KCR. From what I gathered, his MP5 was made from an HK 94 and the Trigger Pack is the actual Registered Part which would be more desirable to most potential buyers.

_______________________________________________________________________________________________________________________________________

Sorry Guys. My Error… I was most concerned about whether or not the seller was legit and when speaking with him it came up that it was a registered trigger pack configured to fit the semi-auto shelf and I missed the fact that it was marked on the outer metal housing Only. I apologize for the error and the confusion!

Edited by Precision Technology
Need to correct Error

I Buy Original, German Factory, Post-Sample, HK 21E Machine Guns, Receivers and 21E Parts. Contact me if you have or know of any for sale.

Michael: Precision Technology: 07 FFL / Class 2 Mfg in AZ: pt72@mac.com

____________________________________________________________________________________________________________________________

Proud to be an NRA LifeEndowmentPatron and Benefactor member as well as remaining an NRA Golden Eagle for many years.

Give to the NRA each and every year until it Hurts!! We must be steadfast in protecting our precious Second Amendment Rights.

VOTE Every Election (city, county, state & federal) - the Life you Save may very well be your ownTM

*** Thank God We Defeated Hillary Clinton, the Treasonous Bull-Dyke Cunt ***

Share this post


Link to post
Share on other sites

So in other words this is a reg sear gun ? If so at $25k that would be a hell of a deal in today's market.

Share this post


Link to post
Share on other sites

Posted (edited)

 

Thanks PT for clarification for potential buyers on this board. 

 

Edited by coolhand

Share this post


Link to post
Share on other sites

I am not too familiar w GI reg sear/pack, this would be a rare conversion indeed.

Share this post


Link to post
Share on other sites

Provided it is a reg sear/pack I will buy it, will call you.

Share this post


Link to post
Share on other sites

Posted (edited)

30 minutes ago, RMA said:

So in other words this is a reg sear gun ? If so at $25k that would be a hell of a deal in today's market.

Yes and no(correction, totally no, it is not a sear gun in any way, shape, or form). The actual housing is the registered part. If you zoom into the photo you can see the group logo on the housing. So you can't change out for any of the better looking plastic housings. Or have it changed to burst. And it might only be registered in 9mm. I know I've seen a GI housing before, those where some of the things I remember about them. 

Edited by damcv62

Share this post


Link to post
Share on other sites
15 minutes ago, coolhand said:

That means it's a sear gun and worth a lot more than what he's asking.

Thanks PT for clarification for potential buyers on this board. 

 

No. Incorrect. Please edit your post so others don't get confused. 

Share this post


Link to post
Share on other sites
11 minutes ago, RMA said:

I am not too familiar w GI reg sear/pack, this would be a rare conversion indeed.

It's not a sear. Please update your post so someone doesn't take it as a sear gun. 

Share this post


Link to post
Share on other sites
54 minutes ago, Precision Technology said:

FYI. I just spoke with John Anderson on the phone. Very nice guy and he understands what he is selling. He is going to be at KCR in April helping to setup the Subgun shoots. John offered to allow anyone, seriously, interested in his MP5 the opportunity to check it out and even shoot it at KCR. From what I gathered, his MP5 was made from an HK 94 and the Trigger Pack is the actual Registered Part which would be more desirable to most potential buyers.

Are you 100% sure the housing isn't the registered part? I've seen GI housings before. This one appears to be marked in the same way, so the metal housing has to be kept with the pack that's in it. The maker and sn are on the actual metal housing, and not the pack. I've seen this before. So I'd be surprised to find out this one was done differently. 

Share this post


Link to post
Share on other sites

Post updated.

Share this post


Link to post
Share on other sites

This explains my limited knowledge on a GI HK94 conversion, something you typically do not see out there that's for sure.

Share this post


Link to post
Share on other sites
1 minute ago, RMA said:

This explains my limited knowledge on a GI HK94 conversion, something you typically do not see out there that's for sure.

This is another time the new site lay out helps. Some times odd ball stuff pops up. And don't get me wrong, the pack might have a sn on it. The one I'm familiar with it did not. It was a weird way to do a conversion, but they did a lot of odd ball stuff back in the day. If this pack does in fact have a sn and maker info on both the housing and the pack itself, I'm thinking you could move the pack, don't know why you couldn't. But I'm afraid the pack has no such markings, and as such you have to leave the pack in the housing. 

Share this post


Link to post
Share on other sites
17 minutes ago, damcv62 said:

This is another time the new site lay out helps. Some times odd ball stuff pops up. And don't get me wrong, the pack might have a sn on it. The one I'm familiar with it did not. It was a weird way to do a conversion, but they did a lot of odd ball stuff back in the day. If this pack does in fact have a sn and maker info on both the housing and the pack itself, I'm thinking you could move the pack, don't know why you couldn't. But I'm afraid the pack has no such markings, and as such you have to leave the pack in the housing.

Sorry Guys. My Error… I was most concerned about whether or not the seller was legit and when speaking with him it came up that it was a registered trigger pack configured to fit the semi-auto shelf and I missed the fact that it was marked on the outer metal housing Only. I apologize for the error and the confusion!


I Buy Original, German Factory, Post-Sample, HK 21E Machine Guns, Receivers and 21E Parts. Contact me if you have or know of any for sale.

Michael: Precision Technology: 07 FFL / Class 2 Mfg in AZ: pt72@mac.com

____________________________________________________________________________________________________________________________

Proud to be an NRA LifeEndowmentPatron and Benefactor member as well as remaining an NRA Golden Eagle for many years.

Give to the NRA each and every year until it Hurts!! We must be steadfast in protecting our precious Second Amendment Rights.

VOTE Every Election (city, county, state & federal) - the Life you Save may very well be your ownTM

*** Thank God We Defeated Hillary Clinton, the Treasonous Bull-Dyke Cunt ***

Share this post


Link to post
Share on other sites
5 minutes ago, Precision Technology said:

Sorry Guys. My Error… I was most concerned about whether or not the seller was legit and when speaking with him it came up that it was a registered trigger pack configured to fit the semi-auto shelf and I missed the fact that it was marked on the outer metal housing Only. I apologize for the error and the confusion!

People have unmarried the housings, I did some digging after speaking the owner. 

He is calling the ATF to make some inquiries regarding this and I have seen Form and Pics of everything it "may" be a possibility.

Share this post


Link to post
Share on other sites

Put some more pictures of the registered housing and the top o the HK94. I will call the ATF in the morning an ask if the housing can be swapped with other roller locked hosts.

Share this post


Link to post
Share on other sites

There are no markings on the pack.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now