Jump to content

Who welds semi-auto HK bolts to f/a?


flgunguy

Recommended Posts

I just realized that my HK93 can be readily converted to host my sear pack if I just get a full auto bolt carrier. But instead of spending hundreds on that and possibly have bolt gap issues, I just want to get my current semi carrier converted to a f/a bolt. 

I will only shoot it a few times, just have a bunch of mags that are already loaded with old ammo so figured I'd have fun blasting it without major modification to the gun. This seems like the easiest way and the HK93 will still be 99% the same as before.

Full auto bolt and switch out the ejector with my 9mm one in the current sear pack, that's it right??

Also, does the HK94 trigger housing fit the HK93?

Edited by flgunguy
Link to comment
Share on other sites

Nearly any smith can do it. Ive welded some with a mig but now I used a hardened filler rod. Really doesn't matter as the welded ones held up fine.

If you want the best conversion use a piece of tool steel, mill slot replace/ tig in like TSC does.

I would use a hammer spring as well if you dont have that.

 yes

Link to comment
Share on other sites

  • 2 months later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...