JECIII

12 ga full auto lightning link host? New video link posted!

Location:

19 posts in this topic

Posted (edited)

Got a new host working for the registered lightning link.  One of the m12 12ga ar shotguns over the last few months.  Working about 95 percent in full auto on 8 birdshot.   Near 100 pct with hot loads 3 dram plus. Requires a modification to the bolt carrier and lower like a ar15.  You do need to swap out all the Chinese springs and hammer/ trigger pins. Once I have it finalized I'll post some pics and more info. 

I can tell you 12ga full auto is a blast but 75 rds will leave a mark on you.  Mabye thats why even back in the day they weren't many full auto shotguns except for the AA.  I think they purposely slowed the AA down to 360 rpm.  This cycles about the same rate as ar10 full auto. 

The host only has 10 round mags which after 2 or 3 mags is a good thing for the shoulder. Nobody currently.makes any for it bigger than 10.

However that being said anyone know somebody good at mabye modifying a saiga drum to fit.  Mabye attaching one of the jts mags to it as a mag tower or something.  Any ideas?

I really need a drum maker now!  I have talked with the mfg of the host and they would be interested as well in getting some drums for it. So it might be 500 to 1000 units.

If you have any ideas let me know. Keep and eye out  I will be releasing a few of the test pre examples with a postie link soon for dealers or mfg.  Mfg would not need a letter and for dealer we would have some leeway in model for the link since we produce the postie link.

Check out the link below to see in action.  Yes that is cheap federal #7 target loads its running ON!  NEED A DRUM MAKER OR SOMEONE WITH A GOOD 3D PRINTER!

12ga full auto with a lightning link

https://youtu.be/xMLSWLekB6A

 

Thanks

John C 07 SOT columbus OH

Jecayc@hotmail.com

510 406 4193

Edited by JECIII
Posted video link

Share this post


Link to post
Share on other sites

You could have posted a video of a magazine dump

Share this post


Link to post
Share on other sites

Video is too big to post on Sturm trying to trim it to fit.  If you have an email I can send

Share this post


Link to post
Share on other sites

Can't post video in Sturm.  If anyone wants it email me jecayc@hotmail.com

Share this post


Link to post
Share on other sites

Working very well now and 12ga ammo can be found now

Share this post


Link to post
Share on other sites

My shoulder hurts thinking about it.  :D

Share this post


Link to post
Share on other sites

IRyo if you have an email I can send som pics of the shoulder.  Definitly don't shoot without a shirt.  It will look like a new tatoo:D

Share this post


Link to post
Share on other sites

New link to the video!  Only had the 5 round mag.  Runs on federal #7 target shells.   Full auto only at the moment working on modifying a burst kit for it.

12ga full auto with a lightning link

https://youtu.be/xMLSWLekB6A

thanks 

John

Share this post


Link to post
Share on other sites
4 hours ago, JECIII said:

New link to the video!  Only had the 5 round mag.  Runs on federal #7 target shells.   Full auto only at the moment working on modifying a burst kit for it.

12ga full auto with a lightning link

https://youtu.be/xMLSWLekB6A

thanks 

John

that was awesome. is that a AR FCG?

Share this post


Link to post
Share on other sites

Nope the factory semi trigger group is used just like a sp1

Share this post


Link to post
Share on other sites

nice.  I've done a few AR10s with LL's.

Share this post


Link to post
Share on other sites

I remember Andy I can't believe it's been almost a decade.  Mk47 is very similar except more bolt modifications and a slightly different shorter paddle than a 10.

Share this post


Link to post
Share on other sites

Posted (edited)

Now working with the 10 round mags.  Running on #7 birdshot. Check out the new video link.  Also check out my channel on the other host conversions possible.  Also will be posting some videos specific to registered link owners

 

Edited by JECIII

Share this post


Link to post
Share on other sites

I need a drum can anyone help.  Jts m12ar is the model

Share this post


Link to post
Share on other sites

Posted (edited)

2 hours ago, JECIII said:

Now working with the 10 round mags.  Running on #7 birdshot. Check out the new video link.  Also check out my channel on the other host conversions possible.  Also will be posting some videos specific to registered link owners

 

pure titties

can you just drill a sear hole and mod the bcg to trip like a AR10?

Edited by taylorwso

Share this post


Link to post
Share on other sites

No only possible with a lightning link not a dias.  Geometry isn't right for a sear.  Ypuncpuld maybe make a custom on but it'd be a ground up design and you'd have to design a hammer with a hook.  All the FCG is stf ar15 except the hammer which is a little longer.

Share this post


Link to post
Share on other sites

What range was that video at? Just curious as it looks like a good place to lob some 40mm. 

Share this post


Link to post
Share on other sites

Lost river shoot range in yellow spring wv.  I'm sure Kevin the owner would love to have you come out.   We had a mini gun last time.  Google it's  great shoot 3x a year

Edited by JECIII

Share this post


Link to post
Share on other sites

Awesome! thanks for the info. Wasn't sure if it was something in the Central Ohio area or a MG shoot. But that doesn't sound like a bad drive! 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now