Ryo Posted August 1, 2020 Report Share Posted August 1, 2020 (edited) I received a really rough looking MG34 flash hider. I can't find any markings on it. It looks very roughly made vs the ones I've seen photos of which were machined. Sorry.. for some reason the images won't post correctly.. here are the links https://i.imgur.com/QKIimoH.jpg https://imgur.com/szmKdyf https://i.imgur.com/hDNxUnp.jpg Edited August 1, 2020 by Ryo Quote Link to comment Share on other sites More sharing options...
mike todd Posted August 4, 2020 Report Share Posted August 4, 2020 My 2cents call is, I would say its just a "recovered" assembly. over the years I have seen many parts from digs, basements and other sources that were dug up and someone applied finish to whats left. many will end up looking like a bad casting. years back someone left a COMPLETE MG-81 Z twin inside my gate that looked just like this hider. it was cleaned and everything moved except the rollers on the carrier. Quote Link to comment Share on other sites More sharing options...
Ryo Posted August 4, 2020 Author Report Share Posted August 4, 2020 Ahhh.... That could explain it.. possibility it was on a booster housing so the threads didn't didn't get too corroded, but the rest of the body did.. though I wouldn't have thought the stamp markings would get corroded off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.