de64 Posted February 25, 2020 Report Share Posted February 25, 2020 (edited) This is a 7.62 x 51 (.308) complete 21A1 Belt Feed Mech for a 21 / 21K build. See photos and additional photos and references can be provided. Price is $2,500.00. Shipped via insured USPS registered mail. Payment in full. I accept cashiers check and bank wire for payment. Shipping additional. Edited March 18, 2020 by de64 Price reduction Link to comment Share on other sites More sharing options...
de64 Posted March 3, 2020 Author Report Share Posted March 3, 2020 Bump- Price Reduction $3,000.00 Link to comment Share on other sites More sharing options...
WTFOver Posted March 5, 2020 Report Share Posted March 5, 2020 Is this a German HK 21E Feed Mech? Don't see the date code or belt funnel at the left side? Very interested if it is German. Link to comment Share on other sites More sharing options...
WTFOver Posted March 5, 2020 Report Share Posted March 5, 2020 How do I private message on this? Link to comment Share on other sites More sharing options...
de64 Posted March 5, 2020 Author Report Share Posted March 5, 2020 WTF top right corner. The three bar. Will drop brown and show an envelope for email or messaging I believe dave Link to comment Share on other sites More sharing options...
de64 Posted March 5, 2020 Author Report Share Posted March 5, 2020 WTF I have looked all over it for a date code and cannot find one so I’m going to have to go with FMP made dave Link to comment Share on other sites More sharing options...
de64 Posted March 12, 2020 Author Report Share Posted March 12, 2020 Bump - Price Reduction - $2,800.00 Link to comment Share on other sites More sharing options...
har1690 Posted March 12, 2020 Report Share Posted March 12, 2020 What is the difference between the 21A1 and 21e feed mech? Link to comment Share on other sites More sharing options...
har1690 Posted March 12, 2020 Report Share Posted March 12, 2020 Maybe one thing I just noticed is, there are no threaded holes on the left side to allow the attachment of the belt inlet guide. No biggie. Anything else? Link to comment Share on other sites More sharing options...
de64 Posted March 12, 2020 Author Report Share Posted March 12, 2020 Har, another difference is the E feed mech "pushes" and "pulls" the belt versus the A1 just "pulls" the belt. I have attached a photo the E mech is on the right side and A1 on the left These are a few other differences noted Dave Link to comment Share on other sites More sharing options...
WTFOver Posted March 13, 2020 Report Share Posted March 13, 2020 So it looks like this is an A1 feed mech Link to comment Share on other sites More sharing options...
de64 Posted March 13, 2020 Author Report Share Posted March 13, 2020 WTF, That is correct my original posting title was incorrect as an "E" feed mech. I have since changed it to the correct title of 21A1 feed mech. Dave Link to comment Share on other sites More sharing options...
taylorwso Posted March 13, 2020 Report Share Posted March 13, 2020 (edited) do you have the bolt carrier to go with it Edited March 15, 2020 by taylorwso Link to comment Share on other sites More sharing options...
WTFOver Posted March 15, 2020 Report Share Posted March 15, 2020 On 3/13/2020 at 4:04 PM, taylorwso said: do you have the bolt carrier to go with it I had a customer with a HK21A1 and swapped out the 21A1 mech for a 21E one and it worked fine. So I'm guessing a 21E carrier or 21 carrier would work depending on your build cocking tube. Link to comment Share on other sites More sharing options...
de64 Posted March 16, 2020 Author Report Share Posted March 16, 2020 WTF, Not sure on the carrier. Have a complete 21 carrie that I may put up But I do not know the differences between a 21 carrier and 21A1 carrier if there are any Dave Link to comment Share on other sites More sharing options...
de64 Posted March 18, 2020 Author Report Share Posted March 18, 2020 Final price drop..... then back in the safe Thanks Link to comment Share on other sites More sharing options...
de64 Posted March 27, 2020 Author Report Share Posted March 27, 2020 bump Link to comment Share on other sites More sharing options...
de64 Posted April 8, 2020 Author Report Share Posted April 8, 2020 bump Link to comment Share on other sites More sharing options...
de64 Posted May 17, 2020 Author Report Share Posted May 17, 2020 bump Link to comment Share on other sites More sharing options...
Recommended Posts