Thumpy Posted November 11, 2019 Report Share Posted November 11, 2019 Hey fellas with my reising the plug keeps on wanting to back out when shooting every 3-4 rnds we have to tighten it. Would a new recoil spring keep this from happening ? Or is there another issue? Quote Link to comment Share on other sites More sharing options...
mike todd Posted November 11, 2019 Report Share Posted November 11, 2019 THUMPY, your receiver plug has "stops" or its perimeter is "knurled" for a plunger or detent. with no recoil spring present turn the plug in and out and you should feel "CLICS" as it engages the detent. if not either the spring is worn or dirty OR the detent has rounded too much over the years. clean it all up/ maybe stretch the spring that should help. if not, attempt to "SHARPEN" the detent with a stone. you can test your efect by turning the plug with out the spring until you feel results. IF ALL ELSE FAILS, THANK YOUR LUCKY STARS YOU WERE SO POLITE ANSWEREING MY POSTS AND I WILL DIG YOU OUT A SET! MIKE 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.